.05 brushless comparable to a 400 brushless (Full Version)

All Forums >> [Electric Aircraft Universe] >> Glow to Electric Conversions

Message

---

kochj -> .05 brushless comparable to a 400 brushless (12/5/2012 4:57 PM) O.S. .05 Brushless Motor 3805-1200 Is this engine comparable to a 400 park flyer? I wanted to use a dif. motor other than the following...... Great Planes Rimfire 400 28-30-950 Outrunner It appears to be larger and heavier. Great Planes ElectriFly SPAD XIII WWI ARF 34" Calls for the 400 Rimfire outrunner.... Any help would be appreciated...

---

Dr Kiwi -> RE: .05 brushless comparable to a 400 brushless (1/1/2013 5:26 PM) Yes, it is a bit heavier (76g versus 58g) but if the little bit of extra weight doesn't affect the CG (on a bipe you might need extra weight in the nose!) it should be fine. The higher Kv (1200 versus 950) might mean you'd have to use a slightly smaller prop than the 10 x 3.5 recommended.. but maybe not [O.S. specs say 9x6 (3s?)-11x7 (2s?)] This might be a better choice: http://www.hobbyking.com/hobbyking/store/__8495__Turnigy_2830_Brushless_Motor_1000kv.html

---

Page: [1] 1

SITE MAP!   : :   FORUM RULES RC Universe is a service of Internet Brands, Inc. Copyright © 2001-2013.

0.078125