Shinden by Hebert Competition Designs    Gallery
View related threads: (in this forum | in all forums)

Logged in as Guest



Users viewing this topic: none
    Search This Thread  
 
Printable Version

All Forums >> RC Airplanes >> Pattern Universe - RC Pattern Flying >> RC Pattern Flying >> Shinden by Hebert Competition Designs
Page: [1]

Tower Hobbies Get Coupon Codes Brands  
Login
Message << Older Topic   Newer Topic >>
Shinden by Hebert Competition Designs - 12/20/2012 7:05 PM   
AC Glenn


 

Posts: 216
Score: 100
Joined: 12/14/2002
Last Login: 5/22/2013
From: memphis, TN, USA
Status: offline 		Hey Guys,

Wanted to share with you a re release of Bryan Heberts Shinden model. Bryan has gone back to the drawing board on the scheme and has come up with two very nice looking schemes. The airplane also now is going to be available in a Electric Version and a Glow Version. Bryan has worked very hard with the manufacturer to take a lot of weight out of the airplane so that it will accept an Electric setup no problem. Also the airplane will still be well under weight in the glow version. These models will be available thru Bryan himself and his company Hebert Competition Designs. The models will sell for $1500 dollars. I have attached a few pictures that have been received from the factory. More will be posted when the airplanes arrive. Right now they are in transit but by boat and Bryan hopes to have these models in about 4 weeks time. I hope to have Bryan chime in here shortly with more information. Until then please check out his website as more information will be available soon on all his models including the New Alferma and Soon to be Allure design. http://www.hebertcompetitiondesigns.com/Designs.aspx?ID=1



-A.C.

Attachments
Click to see fullsize image.
Click for fullsize 		Click to see fullsize image.
Click for fullsize 		Click to see fullsize image.
Click for fullsize 		Click to see fullsize image.
Click for fullsize
Click to see fullsize image.
Click for fullsize


Hide Signatures
       Post #: 1

RE: Shinden by Hebert Competition Designs - 12/20/2012 7:21 PM   
sgsterling


 

Posts: 108
Score: 100
Joined: 2/6/2005
Last Login: 5/13/2013
From: Richland, WA, USA
Status: offline 		Good News..

_____________________________

______________________________________________
Steve Sterling, NSRCA Dist 8

Hide Signatures

(in reply to AC Glenn)
       Post #: 2

RE: Shinden by Hebert Competition Designs - 12/20/2012 7:38 PM   
underdw


 

Posts: 285
Score: 100
Joined: 11/7/2004
Last Login: 5/22/2013
From: Lafayette, CO, USA
Status: offline 		Beautiful design!
Do you have a bottom view picture of the yellow version? (there is no way my eyes will distinguish top from bottom on the white version)
Nice price point.
What is the construction and covering of wings and stab?
Who is the manufacture?

Thanks, Dan

Hide Signatures

(in reply to AC Glenn)
       Post #: 3

RE: Shinden by Hebert Competition Designs - 12/20/2012 8:51 PM   
jetmech43


 

Posts: 1362
Score: 100
Joined: 10/7/2003
Last Login: 5/22/2013
From: Bartlett, TN, USA
Status: offline 		looks nice

_____________________________

smooth pass

Hide Signatures

(in reply to underdw)
       Post #: 4

RE: Shinden by Hebert Competition Designs - 12/20/2012 9:37 PM   
MTK



Posts: 3999
Score: 203
Joined: 5/14/2004
Last Login: 5/22/2013
From: Whippany, NJ, USA
Status: offline 		Nice looker!! 1500 is inexpensive for a fully painted, lightweight, 2m x 2m pattern plane


_____________________________

Regards,
MattK

Hide Signatures

(in reply to AC Glenn)
       Post #: 5

RE: Shinden by Hebert Competition Designs - 12/20/2012 11:38 PM   
Walfam


 

Posts: 175
Score: 100
Joined: 5/8/2003
Last Login: 5/18/2013
From: Spokane, WA, USA
Status: offline 		I know a number of the guys I used to fly with loved their shindens and we have a couple up here in the northwest.

Two questions. The models show are electric? is the red model glow since I cannot see it there is a tunnel for a muffler?

I must agree that is this is a full painted plane and can meet the weight requirement and still maintain its excellent flight charistics then it is a very good buy.

Hide Signatures

(in reply to MTK)
       Post #: 6

RE: Shinden by Hebert Competition Designs - 12/20/2012 11:45 PM   
Doug Cronkhite


 

Posts: 3156
Score: 105
Joined: 12/20/2001
Last Login: 5/22/2013
From: San Diego, CA, USA
Status: offline 		Always thought it was a great looking airplane. Glad to see it making a return.

_____________________________

Doug Cronkhite

Hide Signatures

(in reply to Walfam)
       Post #: 7

RE: Shinden by Hebert Competition Designs - 12/21/2012 12:27 AM   
AC Glenn


 

Posts: 216
Score: 100
Joined: 12/14/2002
Last Login: 5/22/2013
From: memphis, TN, USA
Status: offline 		If you go to the link attached in the first post it shows pictures of the bottom of the yellow one. The airplanes are all composite and the manufacture is Xtreme Composites( same people that make the Griffin.

Hide Signatures

(in reply to underdw)
       Post #: 8

RE: Shinden by Hebert Competition Designs - 12/21/2012 2:13 AM   
flyncajun


 

Posts: 400
Score: 105
Joined: 12/26/2006
Last Login: 5/22/2013
From: DENHAM SPRINGS , LA, USA
Status: offline 		Thanks A.C.


I will now import my own designs and support them myself ,This will keep the Quality to my standards and I will be involved with all aspects on the models.


The Shinden was ahead of it`s time almost to big for the 160YS and Early in the composite F3A world. It`s a big Platform, a Solid design Full two Meters and 1100 Square wings.
I have been Flying Brandon`t old Shinden for testing with a YS175 cdi A perfect match (the one he placed 6`th in masters with at the Nats) Brandon landry also won Advanced at the Nat`s the year before with this design .with 10 flights on the borrowed airplane he used.

It`s a Very Stable flier and a Awesome snapper Perfect for the new patterns in both AMA and FAI.

My Team Brett, AC. Glen , Steven Bird ,Scott Mcharg will have this airplane flying with a Contra, and YS ,so I will be able to address all the questions about this model to any system used.
I`m excited to bring this model back to the public it still has a loyal following and I have been Asked many times about the possibility of selling them again
So, I revamped the layup process and updated it with a Composite painted Canopy ,taller Gear ,lighter wings , better wing tube , and a new paint sceme.
the intro price is $1500.00

However I ordered 10 and they are all sold before they came in LOL.
So I have placed another order if you want one contact me and I can give you a time frame of availability and colors

Stay tuned I have Many new products being developed from new designs to control horns and Custom aluminum Valve covers for the YS ( Thanks to Bill Clark,My Metal Master and part of my team.

Bryan

_____________________________

Hebert competition designs "Team" YS, Futaba, cool power, Central hobbies, Hyde Mounts, contra, xtreme composites

Hide Signatures

(in reply to AC Glenn)
       Post #: 9

RE: Shinden by Hebert Competition Designs - 12/21/2012 2:18 PM   
apereira


 

Posts: 1326
Score: 100
Joined: 6/30/2002
Last Login: 5/22/2013
From: Caracas, VENEZUELA
Status: online 		One of your most beautiful designs for sure Brian, and it looks like it was just designed.

Regards

Alejandro

Hide Signatures

(in reply to flyncajun)
       Post #: 10

RE: Shinden by Hebert Competition Designs - 12/21/2012 3:41 PM   
MTK



Posts: 3999
Score: 203
Joined: 5/14/2004
Last Login: 5/22/2013
From: Whippany, NJ, USA
Status: offline 		Bryan,

Do you have the data handy on this model?

Specifically size and weight of parts. It might be helpful. Or if the info is on the website, a link to the spot


_____________________________

Regards,
MattK

Hide Signatures

(in reply to flyncajun)
       Post #: 11

RE: Shinden by Hebert Competition Designs - 12/21/2012 10:22 PM   
flyncajun


 

Posts: 400
Score: 105
Joined: 12/26/2006
Last Login: 5/22/2013
From: DENHAM SPRINGS , LA, USA
Status: offline 		Matt
I don`t have weights yet I`m waiting on the factory for that.
The electric version "Shinden LTE "is Layed up with a different method for weight reduction and is lighter than the glow version.
The last Shinden I had imported to me ( the one Brandon Landry flew) and Matt flew this year at the Nats with wet setup powered by YS 160 was 10 pounds 4 ounces with no special setup. and a clear plastic canopy

They will be very comparable to the Griffin overall in weight Except,
The model uses a 3.5" spinner and is a full 78.5" long and 78.5 " span
The fuse is 7" wide at the wing and 14.5" tall the fuse has a lot of girth.
It`s still very current for todays pattern, and actually has features we will be moving toward again in FAI.

Bryan




_____________________________

Hebert competition designs "Team" YS, Futaba, cool power, Central hobbies, Hyde Mounts, contra, xtreme composites

Hide Signatures

(in reply to MTK)
       Post #: 12

RE: Shinden by Hebert Competition Designs - 12/25/2012 8:51 PM   
flyncajun


 

Posts: 400
Score: 105
Joined: 12/26/2006
Last Login: 5/22/2013
From: DENHAM SPRINGS , LA, USA
Status: offline 		Here area few videos of Trim testing the Shinden flying through the FAI P Schedule
Enjoy
Bryan

http://www.youtube.com/watch?v=W6uBTy1ltI0&feature=share


_____________________________

Hebert competition designs "Team" YS, Futaba, cool power, Central hobbies, Hyde Mounts, contra, xtreme composites

Hide Signatures

(in reply to flyncajun)
       Post #: 13

RE: Shinden by Hebert Competition Designs - 12/26/2012 4:47 PM   
flyncajun


 

Posts: 400
Score: 105
Joined: 12/26/2006
Last Login: 5/22/2013
From: DENHAM SPRINGS , LA, USA
Status: offline 		I just got weights from the factory.
The electric version will be 2250- 2300 grams. this includes gear, pants, and wing tube.
This will be reduced more on the next order due in Feb.

The glow version 2400-2450 at the same level of completion. chin, canopy mounted with quick latch. servo plate installed,

hebertcompetitiondesigns.com

_____________________________

Hebert competition designs "Team" YS, Futaba, cool power, Central hobbies, Hyde Mounts, contra, xtreme composites

Hide Signatures

(in reply to flyncajun)
       Post #: 14

RE: Shinden by Hebert Competition Designs - 1/4/2013 5:35 PM   
MTK



Posts: 3999
Score: 203
Joined: 5/14/2004
Last Login: 5/22/2013
From: Whippany, NJ, USA
Status: offline 		Bryan, Any news of the Shinden next delivery?


_____________________________

Regards,
MattK

Hide Signatures

(in reply to flyncajun)
       Post #: 15

RE: Shinden by Hebert Competition Designs - 1/5/2013 12:00 AM   
flyncajun


 

Posts: 400
Score: 105
Joined: 12/26/2006
Last Login: 5/22/2013
From: DENHAM SPRINGS , LA, USA
Status: offline 		Hi Matt,
The next shipment of 10 will probably be in March. Your custom Shinden will be included in that shipment.
The factory is interested in your project.
This new batch is nearly sold as well I only have a few left.


Bryan H.

_____________________________

Hebert competition designs "Team" YS, Futaba, cool power, Central hobbies, Hyde Mounts, contra, xtreme composites

Hide Signatures

(in reply to MTK)
       Post #: 16

RE: Shinden by Hebert Competition Designs - 1/6/2013 6:41 PM   
Ryans Rebel


 

Posts: 1184
Score: 100
Joined: 7/6/2002
Last Login: 5/21/2013
From: St. Martinville, LA, USA
Status: offline 		Nice!

Ryan

Hide Signatures

(in reply to flyncajun)
       Post #: 17

RE: Shinden by Hebert Competition Designs - 1/15/2013 9:42 AM   
TimBle


 

Posts: 2649
Score: 162
Joined: 4/10/2010
Last Login: 5/22/2013
From: Cape Town, SOUTH AFRICA
Status: offline 		will the Shinden accept a gasoline engine?

Hide Signatures

(in reply to Ryans Rebel)
       Post #: 18

RE: Shinden by Hebert Competition Designs - 1/15/2013 9:34 PM   
MTK



Posts: 3999
Score: 203
Joined: 5/14/2004
Last Login: 5/22/2013
From: Whippany, NJ, USA
Status: offline
quote:

ORIGINAL: TimBle

will the Shinden accept a gasoline engine?


I'm counting on it!! OS GT33, on canister or pipe, haven't decided which. I'll be doing a report for Bryan's website.


_____________________________

Regards,
MattK

Hide Signatures

(in reply to TimBle)
       Post #: 19

Page:   [1]
All Forums >> RC Airplanes >> Pattern Universe - RC Pattern Flying >> RC Pattern Flying >> Shinden by Hebert Competition Designs
Page: [1]





Jump to:


 
Google 



Search | Marketplace | Event Calendar | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Instructor Search | Field|Track|Marina Search

Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

SITE MAP!   : :   FORUM RULES

RC Universe is a service of Internet Brands, Inc. Copyright © 2001-2013.

Charities we support that also need your help
Yorkie Rescue | Humane Society | ASPCA | Crohn's-Colitis America


0.469RCU1