VIBE 50 NEX (Full Version)

All Forums >> [RC Helicopters] >> RC Helicopter General Discussions



Message

rcheliguy75 -> VIBE 50 NEX (12/23/2012 9:09 PM)

I'm doing a VIBE 50 NEX build that was shown in an RC HELI magazine issue (May 2011).

Some of the parts are really expensive, could someone recommend a substitue for the following part:

Cyclic Sevos: JR 8917HV, I would need 3 and they go for 150$ each



BarracudaHockey -> RE: VIBE 50 NEX (12/25/2012 12:26 AM)

You may find this helpful (though I used the 8717's :))
http://www.rcuniverse.com/magazine/article_display.cfm?article_id=1389

To answer your question, Align DS610s



Rafael23cc -> RE: VIBE 50 NEX (12/25/2012 4:11 AM)


quote:

ORIGINAL: rcheliguy75

I'm doing a VIBE 50 NEX build that was shown in an RC HELI magazine issue (May 2011).

Some of the parts are really expensive, could someone recommend a substitue for the following part:

Cyclic Sevos: JR 8917HV, I would need 3 and they go for 150$ each



I'm glad to see that you are following the instruction book to the letter. On the other hand, if you are asking these kind of questions, I'd strongly suggest that you get a local pilot to help you thru the process. You sound like you are still a lil green. I'd hate to see your post in a couple of weeks about how you trashed your helicopter.

Rafael



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

RC Universe is a service of Internet Brands, Inc. Copyright © 2001-2013.
0.046875