Any problem with Mintor22

Any problem with Mintor22 (Full Version)

All Forums >> [Glow Engines, Gas Engines, Fuel & Mfg Support Forums] >> Gas Engines

Message

okinox -> Any problem with Mintor22 (1/23/2013 9:39 AM)
Hello; I bought a Mintor22. I like to know if anyone has had a problem with the engine. I appreciate your answers Kind regards.

karolh -> RE: Any problem with Mintor22 (1/23/2013 2:27 PM)
Sent you a PM. Karol

Charley -> RE: Any problem with Mintor22 (1/27/2013 1:23 AM)
quote: ORIGINAL: karolh Sent you a PM. Karol This bodes ill.... CR

karolh -> RE: Any problem with Mintor22 (1/27/2013 2:28 AM)
quote: ORIGINAL: Charley quote: ORIGINAL: karolh Sent you a PM. Karol This bodes ill.... CR Not really Karol

Ernie Misner -> RE: Any problem with Mintor22 (1/29/2013 6:39 AM)
I think he means we'd like to see what you said in the P.M. for educational purposes.

karolh -> RE: Any problem with Mintor22 (1/30/2013 3:56 PM)
quote: ORIGINAL: Ernie Misner I think he means we'd like to see what you said in the P.M. for educational purposes. Ok for what it's worth here it is. " Okinox, the M22 is a real marvel of engineering and machining and is as beautiful on the inside as it is on the outside. That said, a few of the earlier models were supplied with slightly undersized pistons and rings of questionable quality which caused a low compression problem. Several complaints from disatisfied customers forced Mintor to take a hard look at their operations and based on their findings they took the decision to suspend all manufacturing and restructure their operations with greater emphasis on processes and Quality Control. If you purchased your engine recently then I believe you have nothing to worry about. Much more information on the Mintor 22 is available from an on going discussion on the F*** ** site, so check it out." Karol

captinjohn -> RE: Any problem with Mintor22 (1/30/2013 9:33 PM)
Hi Karol & Ernie. Tis Capt,n John here. Yes take a look see on the FG site. I am sure most others do.

okinox -> RE: Any problem with Mintor22 (1/30/2013 11:16 PM)
Received¡¡¡

Granpooba -> RE: Any problem with Mintor22 (1/30/2013 11:34 PM)
Port machining does not appear very quality oriented in my poor eye sight. [:)]

okinox -> RE: Any problem with Mintor22 (1/30/2013 11:49 PM)
Correct the cylinder seems not fine grinding. Do not know much about mechanics but fails to convince me.

bcchi -> RE: Any problem with Mintor22 (1/31/2013 6:11 AM)
quote: ORIGINAL: Granpooba Port machining does not appear very quality oriented in my poor eye sight. [:)] Not poor eyesite,looks like it was done by a hand grinder. BC

okinox -> RE: Any problem with Mintor22 (1/31/2013 12:42 PM)
Concerning the internal engine polished'm a little scared because it's the first time I see a bad cylinder polished. Could polish better internally what interesting. I think I mention that mechanics do not know much, but my cousin is a mechanic and I'm sick of seeing motors inside. Not if the shooting refine that. Well I have been lucky to meet this morning to a shareholder of club buddy Castellar is, this gentleman has been foreman of the Mercedes for several years. He says he has touched 2T racing engines and the same grinding, not to worry. In the shoot rotating refine shirt. No problem with the engine running perfect wrath. My old boss said if you know of one thing it is best to keep quiet. Slds.

AJsToyz -> RE: Any problem with Mintor22 (1/31/2013 2:09 PM)
The whole cylinder remarks are funny to say the least. The DL50 ran very well and had one of the worst looking cylinders when it hit the market yet no one complained. [;)]

okinox -> RE: Any problem with Mintor22 (1/31/2013 2:20 PM)
Pardon for my english indian translator. I was a fool not to learn English.

captinjohn -> RE: Any problem with Mintor22 (1/31/2013 2:37 PM)
Mintor 22cc engine.

Whistling Death -> RE: Any problem with Mintor22 (1/31/2013 2:54 PM)
quote: ORIGINAL: AJsToyz The whole cylinder remarks are funny to say the least. The DL50 ran very well and had one of the worst looking cylinders when it hit the market yet no one complained. [;)] Because nobody expected a cheap Chinese engine to be flawless. For Mintor to take the time to CNC machine the whole engine and the muffler but not finish the cylinder is very odd.

okinox -> RE: Any problem with Mintor22 (1/31/2013 3:13 PM)
Will the nickaasil that covers everything. It does not seem quite right to me either.

AJsToyz -> RE: Any problem with Mintor22 (1/31/2013 5:26 PM)
quote: ORIGINAL: captinjohn Mintor 22cc engine. This cylinder looks fine, I know this engine runs good!

TimBle -> RE: Any problem with Mintor22 (1/31/2013 7:14 PM)
I can't see what the problem is?

okinox -> RE: Any problem with Mintor22 (1/31/2013 8:03 PM)
The engine has not rolled. I do not see what the problem according to a good mechanic and have seen them and not spend anything.

Ernie Misner -> RE: Any problem with Mintor22 (1/31/2013 8:04 PM)
Nice pictures Capt'n. In the first one it shows nicely the finger or open porting on the two ports opposite from the exhaust. That would give those ports more flow area for sure.

toolmaker7341 -> RE: Any problem with Mintor22 (1/31/2013 9:37 PM)
Needs a new ring. It's not round not even close to sealing and there is no gap (no wall tension)

TimBle -> RE: Any problem with Mintor22 (1/31/2013 10:10 PM)
AND YOU CAN TELL THIS HOW?

captinjohn -> RE: Any problem with Mintor22 (1/31/2013 10:22 PM)
Actually the ring had a lot of outward tension. Also a big end gap (a place for compression too leak) and one area of the surface of the ring seemed to be void of contact...maybe caused when the ring was finished up.

TimBle -> RE: Any problem with Mintor22 (1/31/2013 10:56 PM)
and how pray can you tell that.....?

Page: [1] 2 3 next > >>

SITE MAP! : : FORUM RULES

RC Universe is a service of Internet Brands, Inc. Copyright © 2001-2013.

0.359375