Airframe for WREN 44?

Airframe for WREN 44? (Full Version)

All Forums >> [RC Airplanes] >> RC Jets

Message

jetster81 -> Airframe for WREN 44? (1/31/2013 10:06 AM)
I have just bought a slightly used Wren 44 on a whim (great price!) an am now in need of an airframe, any suggestions especially from 44 owners appreciated.

pilot tw -> RE: Airframe for WREN 44? (1/31/2013 10:13 AM)
quote: ORIGINAL: jetster81 I have just bought a slightly used Wren 44 on a whim (great price!) an am now in need of an airframe, any suggestions especially from 44 owners appreciated. I tested the F-15 EDF Powered by 6kg thrust, and over power , i think power by 4.5kg thrust will be perfect, http://www.skymasterjet.com/ef15.htm http://youtu.be/lkOj-ZTThYM next time will test the EDF F18f conersion to 6 kg thruat, Best Regards\ Anton

pilot tw -> RE: Airframe for WREN 44? (1/31/2013 10:17 AM)
and 1.6M Veper jet will be perfect for wren44 , i has tested flight the Viper jet 1.6M by wren44 on two years ago,[;)] http://www.skymasterjet.com/eviperjet.htm

essendon_05 -> RE: Airframe for WREN 44? (1/31/2013 10:27 AM)
What about the F-16 EDF, when will that be revealed Anton?? Perfect for Wren 44 also

HarryC -> RE: Airframe for WREN 44? (1/31/2013 10:29 AM)
many of the Jet hangar hobbies models are suitable, and in the UK Russ Delaney is prototyping the manufacture of several of the thorpe bros models for turbine kits. http://www.rcmf.co.uk/4um/index.php/topic,94424.0.html Or there is the popular Savex L-39. boomerang nano. From your description I suspect you bought the 7lb thrust engine that was for sale on the JMA website, bear in mind it doesn't have the oomph of the later Gold version with 10lb thrust.

Yann -> RE: Airframe for WREN 44? (1/31/2013 10:37 AM)
It's all here: http://www.rcuniverse.com/forum/m_2490341/tm.htm

ticketec -> RE: Airframe for WREN 44? (1/31/2013 10:43 AM)
There was a thread with pretty much the same question a week or so ago... found it: http://www.rcuniverse.com/forum/m_11363479/anchors_11367724/mpage_1/key_/anchor/tm.htm#11367724 Thanks dave

Modellbau USA -> RE: Airframe for WREN 44? (1/31/2013 11:09 AM)
Aviation Design E-Scorpion.

Dr Honda -> RE: Airframe for WREN 44? (1/31/2013 12:33 PM)
They work well, in any 90mm EDF model. I have one in a CMP T-45.

Bob_B -> RE: Airframe for WREN 44? (1/31/2013 12:52 PM)
A friend installed one in the Jet Teng Viper Jet flies great

ticketec -> RE: Airframe for WREN 44? (1/31/2013 1:04 PM)
quote: ORIGINAL: pilot tw I tested the F-15 EDF Powered by 6kg thrust, and over power , i think power by 4.5kg thrust will be perfect, http://www.skymasterjet.com/ef15.htm http://youtu.be/lkOj-ZTThYM next time will test the EDF F18f conersion to 6 kg thruat, Best Regards\ Anton Hi anton, Is the test of the turbine F-18 far away? I have a Wren 54 with 5.5kg of thrust that needs a home! Is there any plans to produce an earlier F/A-18, like and A or C version? Thanks Dave

jetster81 -> RE: Airframe for WREN 44? (1/31/2013 8:17 PM)
Thanks for your interest folks there is certainly a lot to look at.

mikedenilin -> RE: Airframe for WREN 44? (1/31/2013 8:22 PM)
Jet Hangar A7, and Sabre. Do a you tube search for their flying video. Mike

cmjets -> RE: Airframe for WREN 44? (1/31/2013 8:53 PM)
Hello friends:[:)] I am very happy with my new Easy Jet trainer of Joao Matos Rc. Regards from Spain.[;)] Carlos Márquez ____________________________________ http://cmjets.blogspot.com.es/

jetspud -> RE: Airframe for WREN 44? (2/1/2013 2:22 AM)
I have mine in a comp arf spark but I am building a Jet-teng viper jet as we speek the 90mm one not the bigger one they have. Should be fun David

Boomerang1 -> RE: Airframe for WREN 44? (2/1/2013 7:17 AM)
If you are after cheap the Bobcat 50 converts to turbine fine. Not sure if they are retract ready these days & you will have to do the usual cheap chinese airframe mods. John.

jetster81 -> RE: Airframe for WREN 44? (2/1/2013 10:55 AM)
Actually talking of cheap I have found this. JP Seagull Ultrajet based on the very popular Multplex foamie of the same name and can be had for about £230 on the net. also there is a good thread on rc network.de where the guys there are having some success with it.

ceffi -> RE: Airframe for WREN 44? (2/1/2013 11:15 AM)
Hi, Graupner news for 2013. http://www.graupner.de/de/products/9913/product.aspx Should be a good choise. When the Viper is available, I will try the model with a Colibri T-25 Christian

67Jag -> RE: Airframe for WREN 44? (2/1/2013 3:51 PM)
Anton, I just started a thread, 'Asymmetrical Thrust'...most appreciate your comments re a 44 Gold in your X-treme 15. Tx! Ray

jetster81 -> RE: Airframe for WREN 44? (2/1/2013 4:48 PM)
quote: ORIGINAL: ceffi Hi, Graupner news for 2013. http://www.graupner.de/de/products/9913/product.aspx Should be a good choise. When the Viper is available, I will try the model with a Colibri T-25 Christian Yep, looks good. Its for a 90mm EDF and 6 cells so a Mod should be fine.

pilot tw -> RE: Airframe for WREN 44? (2/1/2013 5:00 PM)
quote: ORIGINAL: ticketec quote: ORIGINAL: pilot tw I tested the F-15 EDF Powered by 6kg thrust, and over power , i think power by 4.5kg thrust will be perfect, http://www.skymasterjet.com/ef15.htm http://youtu.be/lkOj-ZTThYM next time will test the EDF F18f conersion to 6 kg thruat, Best Regards\ Anton Hi anton, Is the test of the turbine F-18 far away? I have a Wren 54 with 5.5kg of thrust that needs a home! Is there any plans to produce an earlier F/A-18, like and A or C version? Thanks Dave sorry , we only the F-18F super honey version,

flyinfool1 -> RE: Airframe for WREN 44? (2/2/2013 12:31 AM)
I guess I did this backwards? I got the airframe for the 44 first and now need to find a Wren 44 gold kerostart to put in it. I have the YA Stingray, I'm shooting for a dry weight under 10lbs.

T.Oertel -> RE: Airframe for WREN 44? (2/3/2013 9:31 AM)
What about this one?

MP3_tilaco -> RE: Airframe for WREN 44? (2/3/2013 11:01 PM)
The Thorjet look like awesome! I'd like to get a Bae Hawk.

Boomerang1 -> RE: Airframe for WREN 44? (2/4/2013 8:31 AM)
Savex make an F-16 which is suitable for Wren 44 conversion as well as their L-39l: http://www.savex.cz/prod.php?lang=en&id=11 There's an RCU thread for it as well: http://www.rcuniverse.com/forum/m_2729274/mpage_1/key_/tm.htm I have one of these, bought damaged & waiting for repair. There is not a lot of info in the kit regarding the turbine/undercarriage/wing mount, a complex sub assembly which forms the heart of the model however. - John.

Page: [1]

SITE MAP! : : FORUM RULES

RC Universe is a service of Internet Brands, Inc. Copyright © 2001-2013.

0.09375