RE: post some pictures of your pattern plane!! (Full Version)

All Forums >> [RC Airplanes] >> Pattern Flying



Message

Imac Kiwi -> RE: post some pictures of your pattern plane!! (11/2/2004 5:49 AM)

Ewan Galloway in New Zealand

gallent@xtra.co.nz

I have a spare kit for sale with wings and tail feathers skinned set up for YS 140L/DZ with factory soft mount. PM if interested.

Alan



Chris-B-chips -> RE: post some pictures of your pattern plane!! (11/2/2004 6:11 AM)

i love my matrix!! it flies great but i havn't had much time on it. i was given a dud 140dz that never keeps the same setting and barley produces enough power to fly the F3A sequence.



esweber -> RE: post some pictures of your pattern plane!! (11/2/2004 12:27 PM)

Here is my OMS



smchale -> RE: post some pictures of your pattern plane!! (11/2/2004 2:30 PM)

A couple pics of my well-used Boxer 120. 'Man's best friend' has been flying since 1998.
The green plane is my own design from a few years earlier...the Talon...it's just a simple 4-channel sport plane with good flying characteristics. Flys off both land and water.



Wildstyle -> RE: post some pictures of your pattern plane!! (11/14/2004 9:43 AM)

Here is my new 2x2 pattern model, I acquired it from a top pattern flier over here in New Zealand for a good price (Free) to get me in to pattern with low cost. I decided to recover the airframe as it was a bit dirty and the covering was lifting in places. the model is home built and is designed around the Gator Typhoon although it doesn't look that close to a typhoon[8|].

Equipment used
OS 140RX
4X DS9411
DS8411
Bolly 590R Muffler (seven chamber muffler, not a pipe)
Tru turn spinner, tettra and all of that other expensive gear.

Should be ready to fly next weekend, Anthony.



Imac Kiwi -> RE: post some pictures of your pattern plane!! (11/14/2004 11:38 AM)

Hey Wildstyle

That looks like Ted's old Matrix next to your Typhoon



Wildstyle -> RE: post some pictures of your pattern plane!! (11/14/2004 7:00 PM)

Yep It is Teds old Matrix but is now Brian Averys. Brian picked the plane up on Saturday from the taupo pattern meeting, I didn't go but I did have lots of FUN at work[:'(][:'(].
Anthony



mr.bigal -> RE: post some pictures of your pattern plane!! (10/27/2005 7:31 AM)

hey im navaro im buliding a quest write now and im going to put a ys120 is that a good powere.also i have a couple of questions on the buliding part. if ypu could email me on some tips it would be great. thank you [:D][:D][:D]



bridiXLT -> RE: post some pictures of your pattern plane!! (10/31/2005 10:50 AM)

Here is my pattern plane nothing too fancy its a hobbico spectrum that i recovered.its got a gms.40 on a pipe



checho4 -> RE: post some pictures of your pattern plane!! (10/31/2005 5:00 PM)

here is my leo and DASH FIVE.



oxai -> RE: post some pictures of your pattern plane!! (11/29/2005 1:11 PM)

My pattern models

[image]http://www.rcdream.net/uploadImages/2005/6-26/200562621017567.jpg[/image]

[image]http://www.model-dream.net/bbsphoto/041212sjl/6.jpg[/image]



acabrera11 -> RE: post some pictures of your pattern plane!! (11/29/2005 5:15 PM)

My Boxer .60 with .75 Towerhobbies and Futaba 9 Cap.



4* -> RE: post some pictures of your pattern plane!! (11/30/2005 12:21 AM)

Slightly modified Sea Bee. Saito .72



PatternCombatKid53 -> RE: post some pictures of your pattern plane!! (11/30/2005 1:58 AM)

Hi,
Has anyone bought PL Products 2M pattern planes in the "kit" form. If so,what was it like right out of the box(aka, how much building, what needs to be done). Anybody have pictures of what they come like. I'm looking at getting a plane from PL Products myself and I am trying to get as much info as possible.

Thanks,
Doug



snap_roll -> RE: post some pictures of your pattern plane!! (11/30/2005 6:01 AM)


quote:

ORIGINAL: navaro

hey im navaro im buliding a quest write now and im going to put a ys120 is that a good powere.also i have a couple of questions on the buliding part. if ypu could email me on some tips it would be great. thank you [:D][:D][:D]


hi navaro, i think the YS120 would be a little too heavy for that plane, a YS110 would be better[;)]



balsabuster2003 -> RE: post some pictures of your pattern plane!! (11/30/2005 4:56 PM)

Derringer. Probably 20+ years old. Note anhedral horizontal stabilizer. Magnum .91 XL. Gets small real fast! Need to hone up on my flying skills before I fly this one again! Tried a $10 3-blade 12x8 prop for ground clearance. Lasted 1 flight. Back to 2-blade 13x8 prop. Coroplast Spadet in background flys itself. Not so with the Derringer. Requires much attention.[image][/image]



jabowil-RCU -> RE: post some pictures of your pattern plane!! (11/30/2005 4:58 PM)

If you have the 120 YS I think it would fly well. I would give it a try. I've heard of people that have used 140 YS on the Quest.



MHester -> RE: post some pictures of your pattern plane!! (11/30/2005 5:11 PM)

Now that's a trippy looking plane! You should finish it up and fly it for sure!

-Mike



mtcarey -> RE: post some pictures of your pattern plane!! (12/5/2005 4:58 AM)

Icepoint with YS 140 & Carbon Fiber pipe
Zen 90 with YS 120



OhD -> RE: post some pictures of your pattern plane!! (12/5/2005 7:29 PM)

Where did that fuselage come from? It looks like a plane I had back in the 70s called the Stiletto. I had the molds for many years and sold them or gave them away in the mid 80s.

Jim O

quote:

ORIGINAL: balsabuster2003

Derringer. Probably 20+ years old. Note anhedral horizontal stabilizer. Magnum .91 XL. Gets small real fast! Need to hone up on my flying skills before I fly this one again! Tried a $10 3-blade 12x8 prop for ground clearance. Lasted 1 flight. Back to 2-blade 13x8 prop. Coroplast Spadet in background flys itself. Not so with the Derringer. Requires much attention.[image][/image]




balsabuster2003 -> RE: post some pictures of your pattern plane!! (12/10/2005 6:23 PM)


quote:

ORIGINAL: OhD

Where did that fuselage come from? It looks like a plane I had back in the 70s called the Stiletto. I had the molds for many years and sold them or gave them away in the mid 80s.

Jim O

quote:

ORIGINAL: balsabuster2003

Derringer. Probably 20+ years old. Note anhedral horizontal stabilizer. Magnum .91 XL. Gets small real fast! Need to hone up on my flying skills before I fly this one again! Tried a $10 3-blade 12x8 prop for ground clearance. Lasted 1 flight. Back to 2-blade 13x8 prop. Coroplast Spadet in background flys itself. Not so with the Derringer. Requires much attention.[image][/image]



[image][/image]

Here's a picture of the front cover of the assembly instructions. The plane probably came from the Los Angeles area. [image][/image]



Zeneith -> RE: post some pictures of your pattern plane!! (12/13/2005 6:36 AM)

Here are my New Mage Model Beam!



Dominique ACM -> RE: post some pictures of your pattern plane!! (12/13/2005 11:23 AM)

hello Zeneith,

Could you please give us more informations about this Model (Beam) ?

DG



flyjohn -> RE: post some pictures of your pattern plane!! (12/15/2005 5:51 AM)

[image]Here's my Sword. OS 1.60 w/ Karl Mueller header on power pipe 16x12 prop



zeitgeist11 -> RE: post some pictures of your pattern plane!! (12/15/2005 1:38 PM)

Here my Astral XX, designed by giichi naruke of japan. very well designed F3A aircraft. It is installed with a ys 160



Page: <<   < prev  7 8 [9] 10 11 12 13 14 15 16   next >   >>  

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.515625