RE: Photos Of Trailer Interior Layout, Please Post Yours Too!!    Gallery
View related threads: (in this forum | in all forums)

Logged in as Guest



Users viewing this topic: none
    Search This Thread  
 
Printable Version



All Forums >> RC Airplanes >> Tips & Techniques >> RE: Photos Of Trailer Interior Layout, Please Post Yours Too!! Page: <<   < prev  63 64 65 66 67 [68] 69 70 71 72   next >   >>  

Tower Hobbies Get Coupon Codes Brands  
Login
Message << Older Topic   Newer Topic >>
RE: Photos Of Trailer Interior Layout, Please Post Your... - 12/15/2011 1:46 PM   
bolar



Posts: 407
Joined: 1/1/2003
Last Login: 5/18/2013
From: Hobart, IN, USA
Status: offline
quote:

ORIGINAL: tenspeed59

ok...here are a few shots of the trailer loaded up and basically done now...110 volt shore power...12 volt on-board battery power and 1850 watt inverter system...12 volt solar roof mounted battery charging panel...12 volt power plugs galore...110 volt plugs too...12 volt rope lighting and incandescent lights....110 volt flourescent lights too...storage cabinets and drawers...110/12 volt Chillmaster fridge...2 burner Coleman propane stove...12 volt battery setup and spare tire mounted on the tongue...numerous tie downs on both the walls and the floor in various locations...wing racks on one wall and fuselage racks on the opposite wall...epoxy enamel speckled paint on both the floor and partially up the bottom 1/3 of the walls...storage compartments and drawers galore to make parts keeping much simpler and easy for field repairs as needed, when far away from the hangar when traveling...I just wish ''The Nall'' was a tad bit thousand miles closer and fuel prices weren't such a killer nowdays....siiighhh...outside graphics package in the works soon...and the hidden 2 way alarm system is in and works fantastic...includes GPS locator and retrieval feedback...




Nice!! The top on your cabinets, did that come with them or did you add that?


_____________________________

72 MHz Forever...............or at least until I buy a new radio.


Hide Signatures

(in reply to tenspeed59)
       Post #: 1676

RE: Photos Of Trailer Interior Layout, Please Post Your... - 12/16/2011 5:25 AM   
tenspeed59


 

Posts: 50
Joined: 1/11/2010
Last Login: 2/25/2013
From: Penrose, CO, USA
Status: offline 		I made them.....counter top also......and if you look really closely....you can see not just one fire extinguisher....but one at each 'entry/exit' point....both the side and rear door areas..easy pleazy access to them at all times....one just never knows....and being a volunteer fireman, they were the absolute first thing installed permanently inside the trailer....

_____________________________

"There are more planes in the ocean than submarines in the sky"
Club Saito Member # 777, Cub Brotherhood #124

Hide Signatures

(in reply to bolar)
       Post #: 1677

RE: Photos Of Trailer Interior Layout, Please Post Your... - 12/19/2011 9:08 PM   
Flyin Beagle



Posts: 365
Joined: 12/9/2008
Last Login: 3/20/2013
From: Lexington, KY, USA
Status: offline 		Where did you get the cabinets you installed. They look perfect for what I am planning to do.

_____________________________

"My biggest fear in this hobby is that my wife will one day sell my toys for what I told her I paid for them."

Hide Signatures

(in reply to tenspeed59)
       Post #: 1678

RE: Photos Of Trailer Interior Layout, Please Post Your... - 12/20/2011 8:53 AM   
hady


 

Posts: 23
Joined: 2/25/2005
Last Login: 12/8/2012
From: BeirutAchrafieh, LEBANON
Status: offline 		hello guys , please check out my trailer ( in fact its a cargo van with an electrical flatbed ) i posted a video on youtube ( http://youtu.be/GXr1HLNWJZk )
let me know what you think , thank you


_____________________________

http://youtu.be/GXr1HLNWJZk
http://youtu.be/4MRjmKJjr2A

Hide Signatures

(in reply to Flyin Beagle)
       Post #: 1679

RE: Photos Of Trailer Interior Layout, Please Post Your... - 12/20/2011 2:27 PM   
DaveJohansen



Posts: 237
Joined: 8/12/2003
Last Login: 5/17/2013
From: Taber, AB, CANADA
Status: offline 		Nice wheels Hady

Where did you get the power panels from?

Also great paint job on the the van too.

Dave

_____________________________

Taber Night Hawks RC Flying Club www.tabernighthawks.ca

Hide Signatures

(in reply to hady)
       Post #: 1680

RE: Photos Of Trailer Interior Layout, Please Post Your... - 12/20/2011 5:11 PM   
hady


 

Posts: 23
Joined: 2/25/2005
Last Login: 12/8/2012
From: BeirutAchrafieh, LEBANON
Status: offline 		Hi dave , the panels are plexy glass cut and etched on lazer then i put paint inside the etching ( intaglio ) i did it myself ,


_____________________________

http://youtu.be/GXr1HLNWJZk
http://youtu.be/4MRjmKJjr2A

Hide Signatures

(in reply to DaveJohansen)
       Post #: 1681

RE: Photos Of Trailer Interior Layout, Please Post Your... - 12/20/2011 5:23 PM   
tenspeed59


 

Posts: 50
Joined: 1/11/2010
Last Login: 2/25/2013
From: Penrose, CO, USA
Status: offline 		Flying Beagle
I made those cabinets and the formica work top also.....a sharp router bit will trim it up smoothly and perfect if you use a guide fence to keep the distance exact...
quote:

ORIGINAL: Flyin Beagle

Where did you get the cabinets you installed. They look perfect for what I am planning to do.



_____________________________

"There are more planes in the ocean than submarines in the sky"
Club Saito Member # 777, Cub Brotherhood #124

Hide Signatures

(in reply to Flyin Beagle)
       Post #: 1682

RE: Photos Of Trailer Interior Layout, Please Post Your... - 12/20/2011 5:37 PM   
DaveJohansen



Posts: 237
Joined: 8/12/2003
Last Login: 5/17/2013
From: Taber, AB, CANADA
Status: offline
quote:

ORIGINAL: hady

Hi dave , the panels are plexy glass cut and etched on lazer then i put paint inside the etching ( intaglio ) i did it myself ,



Nice handy work

_____________________________

Taber Night Hawks RC Flying Club www.tabernighthawks.ca

Hide Signatures

(in reply to hady)
       Post #: 1683

RE: Photos Of Trailer Interior Layout, Please Post Your... - 12/29/2011 5:57 PM   
tenspeed59


 

Posts: 50
Joined: 1/11/2010
Last Login: 2/25/2013
From: Penrose, CO, USA
Status: offline
quote:

ORIGINAL: tenspeed59

Flying Beagle
I made those cabinets and the formica work top also.....a sharp router bit will trim it up smoothly and perfect if you use a guide fence to keep the distance exact...
quote:

ORIGINAL: Flyin Beagle

Where did you get the cabinets you installed. They look perfect for what I am planning to do.





OK gang....how about  some pic's and info on any racks.....storage units....tables and etc; that you have made.....bought...traded or stolen.....(j/k)......hahaha......and no fair just posting a pix of a folding table and such either!!!!

Also, has anyone used any of the wall and/or floor mounted gas shock type wing and fuselage racks in their transportation needs???

Heres some pix of a simple PVC pipe and fittings rack I made for use around the shop hangar.....and a fueling station and starting box setup I have for use at the field also on wheels.....

Lets see what you guys have too!!!

Attachments
Click to see fullsize image.
Click for fullsize 		Click to see fullsize image.
Click for fullsize 		Click to see fullsize image.
Click for fullsize 		Click to see fullsize image.
Click for fullsize
Click to see fullsize image.
Click for fullsize


_____________________________

"There are more planes in the ocean than submarines in the sky"
Club Saito Member # 777, Cub Brotherhood #124

Hide Signatures

(in reply to tenspeed59)
       Post #: 1684

RE: Photos Of Trailer Interior Layout, Please Post Your... - 12/30/2011 12:20 AM   
Vintauri



Posts: 425
Joined: 4/19/2004
Last Login: 5/17/2013
From: Mankato, MN, USA
Status: offline 		Here are some pics of the stands I have been making. I also wrote up a simple how to article on how to make it.

http://www.vintauri.com/diy-airplane-stand-from-pvc/

Attachments
Click to see fullsize image.
Click for fullsize


_____________________________

Steve
www.vintauri.com

Hide Signatures

(in reply to tenspeed59)
       Post #: 1685

RE: Photos Of Trailer Interior Layout, Please Post Your... - 1/2/2012 10:36 AM   
hady


 

Posts: 23
Joined: 2/25/2005
Last Login: 12/8/2012
From: BeirutAchrafieh, LEBANON
Status: offline 		Some more details :
the two back door setup , the left door is used for all kind of electrical cables, wires, connectors and radio equipments used for charging, repairing etc.........
the right door is equipped with 4 digital meter reader 1) 12 volt battery monitor , 2) 12 Volt amp meter, 3) 24 volt battery monitor 4) 24 volt amp meter .
third row is the Juice , 110 ACV , 220 ACV , 24Volt, 12 Volt, flat bed ON OFF ON , Switch ON OFF for air compressor, Switch ON OFF For cargo led light , Switch ON Off ON for rear curtain and Switch On OFF ON for side curtain.
the 4th row is for the electrical protection ( the fuse panel )
two 12 volt battery's of 100Amp each are used for this set up ( note, that the car electrical system is completely independent from the rear setup ).
http://www.youtube.com/watch?v=GXr1HLNWJZk


_____________________________

http://youtu.be/GXr1HLNWJZk
http://youtu.be/4MRjmKJjr2A

Hide Signatures

(in reply to Vintauri)
       Post #: 1686

RE: Photos Of Trailer Interior Layout, Please Post Your... - 1/2/2012 12:19 PM   
telejojo


 

Posts: 808
Joined: 11/28/2006
Last Login: 5/16/2013
From: HUNTSVILLE, AL, USA
Status: offline 		Very nice........I wonder if you could have bought a good size trailer for what that cost? What kind of mech. moves the platform out?

Hide Signatures

(in reply to hady)
       Post #: 1687

RE: Photos Of Trailer Interior Layout, Please Post Your... - 1/3/2012 1:33 AM   
TOFAST4U2C



Posts: 478
Joined: 10/22/2003
Last Login: 5/6/2013
From: W BABYLON, NY, USA
Status: offline 		Just a little update on my progress for my friends here on RCU. I really like the super trac for the floor to hold things down. I just ordered some more for the upper shelves. 2 gallons of semi gloss white is keeping things brite inside. Thats alot more than I thought it would take. I need to figure out where all the small parts will go now. I guess I wont know what to do with my spare time when this project is done. Oh yea, build planes and fly.




_____________________________

Born to CRUISE, Forced to Work!

Hide Signatures

(in reply to telejojo)
       Post #: 1688

RE: Photos Of Trailer Interior Layout, Please Post Your... - 1/3/2012 10:11 AM   
hady


 

Posts: 23
Joined: 2/25/2005
Last Login: 12/8/2012
From: BeirutAchrafieh, LEBANON
Status: offline
quote:

ORIGINAL: telejojo

Very nice........I wonder if you could have bought a good size trailer for what that cost? What kind of mech. moves the platform out?

i wish i could by a trailer but unfortunately i wont be able to drive with it. i live in the city and roads are not large, plus i dont have space to park it .
the motor is a 0.75hp with a reduction gear 1/10. and a controler . bed can go out in 20 second at full speed .


_____________________________

http://youtu.be/GXr1HLNWJZk
http://youtu.be/4MRjmKJjr2A

Hide Signatures

(in reply to telejojo)
       Post #: 1689

RE: Photos Of Trailer Interior Layout, Please Post Your... - 1/3/2012 11:03 AM   
nk3t


 

Posts: 85
Joined: 6/5/2006
Last Login: 5/18/2013
From: Snow Hill, MD, USA
Status: offline 		Could you give more information on the "super trac" on the floor? Google searches for super trac do not point to any sort of cargo rail system.

Hide Signatures

(in reply to hady)
       Post #: 1690

RE: Photos Of Trailer Interior Layout, Please Post Your... - 1/3/2012 12:10 PM   
hady


 

Posts: 23
Joined: 2/25/2005
Last Login: 12/8/2012
From: BeirutAchrafieh, LEBANON
Status: offline
quote:

ORIGINAL: nk3t

Could you give more information on the ''super trac'' on the floor? Google searches for super trac do not point to any sort of cargo rail system.

i created the system from A to Z , there are some pictures of the rail during the process that can be found on ( https://www.facebook.com/media/set/?set=a.10150232655560175.467677.638975174&type=3 ) .
it was custom made for this van and can be installed on any vehicle or trailer ( off course by customizing the rail ) .


_____________________________

http://youtu.be/GXr1HLNWJZk
http://youtu.be/4MRjmKJjr2A

Hide Signatures

(in reply to nk3t)
       Post #: 1691

RE: Photos Of Trailer Interior Layout, Please Post Your... - 1/3/2012 9:24 PM   
cjshaker


 

Posts: 230
Joined: 6/30/2006
Last Login: 5/14/2013
From: Bend, OR, USA
Status: offline 		The bottom of my trailer has a slim slider in it that holds two 50 cc airplanes on it. You can pull it two thirds out of the trailer for easy access to the airplanes. The tray is low profile, made from aluminum, with ball bearing rollers and catches. He drilled and chamfered tie down attach points in the side rails for me. It is intended for use in RV storage bays. He custom makes them to whatever size you want. It's a small family business, and the owner is great to deal with:

http://www.slimslider.com/

Chris Shaker


Hide Signatures

(in reply to cjshaker)
       Post #: 1692

RE: Photos Of Trailer Interior Layout, Please Post Your... - 1/3/2012 10:42 PM   
Andrew_S



Posts: 576
Joined: 8/3/2002
Last Login: 6/30/2012
From: Gaston, SC, USA
Status: offline 		I think lowes had the tracks. I saw something similiar there..

_____________________________

What do heli''''''''s and ceiling fans have in common? When the blades stop turnin, You start sweatin ! ! !

Hide Signatures

(in reply to cjshaker)
       Post #: 1693

RE: Photos Of Trailer Interior Layout, Please Post Your... - 1/3/2012 11:42 PM   
TOFAST4U2C



Posts: 478
Joined: 10/22/2003
Last Login: 5/6/2013
From: W BABYLON, NY, USA
Status: offline
quote:

ORIGINAL: nk3t

Could you give more information on the ''super trac'' on the floor? Google searches for super trac do not point to any sort of cargo rail system.


Here you go, and worth every penny...
http://www.easternmarine.com/aluminum-super-track-kit-st93


_____________________________

Born to CRUISE, Forced to Work!

Hide Signatures

(in reply to nk3t)
       Post #: 1694

RE: Photos Of Trailer Interior Layout, Please Post Your... - 1/4/2012 8:15 AM   
hady


 

Posts: 23
Joined: 2/25/2005
Last Login: 12/8/2012
From: BeirutAchrafieh, LEBANON
Status: offline
quote:

ORIGINAL: cjshaker

The bottom of my trailer has a slim slider in it that holds two 50 cc airplanes on it. You can pull it two thirds out of the trailer for easy access to the airplanes. The tray is low profile, made from aluminum, with ball bearing rollers and catches. He drilled and chamfered tie down attach points in the side rails for me. It is intended for use in RV storage bays. He custom makes them to whatever size you want. It's a small family business, and the owner is great to deal with:

http://www.slimslider.com/

Chris Shaker


seems good but you have to check if it bend when its fully open , mine can go 2.5 meters with a 500kg on the top without bending. you have to check also if he can provide you the bed with electric motor .



_____________________________

http://youtu.be/GXr1HLNWJZk
http://youtu.be/4MRjmKJjr2A

Hide Signatures

(in reply to cjshaker)
       Post #: 1695

RE: Photos Of Trailer Interior Layout, Please Post Your... - 1/4/2012 8:18 AM   
hady


 

Posts: 23
Joined: 2/25/2005
Last Login: 12/8/2012
From: BeirutAchrafieh, LEBANON
Status: offline
quote:

ORIGINAL: TOFAST4U2C


quote:

ORIGINAL: nk3t

Could you give more information on the ''super trac'' on the floor? Google searches for super trac do not point to any sort of cargo rail system.


Here you go, and worth every penny...
http://www.easternmarine.com/aluminum-super-track-kit-st93


the track is too thin its for light use , dont go for it if you want to put a load on it and specially when you want to pull the flatbed more then 1 meter out of your trailer


_____________________________

http://youtu.be/GXr1HLNWJZk
http://youtu.be/4MRjmKJjr2A

Hide Signatures

(in reply to TOFAST4U2C)
       Post #: 1696

RE: Photos Of Trailer Interior Layout, Please Post Your... - 1/5/2012 9:15 PM   
cjshaker


 

Posts: 230
Joined: 6/30/2006
Last Login: 5/14/2013
From: Bend, OR, USA
Status: offline 		No electric motor needed. Tray easily slides out on ball bearing rollers. The tray easily supports my 210 lb weight when extended. It is built of heavy aluminum. It's designed to carry heavy loads in RV pass through bays.
I've had it installed for a year or two now. I'll post pictures later.

Chris Shaker


quote:

ORIGINAL: hady


quote:

ORIGINAL: cjshaker

The bottom of my trailer has a slim slider in it that holds two 50 cc airplanes on it. You can pull it two thirds out of the trailer for easy access to the airplanes. The tray is low profile, made from aluminum, with ball bearing rollers and catches. He drilled and chamfered tie down attach points in the side rails for me. It is intended for use in RV storage bays. He custom makes them to whatever size you want. It's a small family business, and the owner is great to deal with:

http://www.slimslider.com/

Chris Shaker


seems good but you have to check if it bend when its fully open , mine can go 2.5 meters with a 500kg on the top without bending. you have to check also if he can provide you the bed with electric motor .




Hide Signatures

(in reply to hady)
       Post #: 1697

RE: Photos Of Trailer Interior Layout, Please Post Your... - 1/12/2012 2:54 PM   
stuffer


 

Posts: 314
Joined: 6/4/2003
Last Login: 4/29/2013
From: Piedmont, SC, USA
Status: offline 		The super track is probably the best one I have seen yet! Just ordered one. comes with 4 tracks and 8 rings. SWEET! BTW, the Super Track is for tie downs, Not for shelving. Or sliding shelves.

Hide Signatures

(in reply to hady)
       Post #: 1698

RE: Photos Of Trailer Interior Layout, Please Post Your... - 1/13/2012 2:13 AM   
TOFAST4U2C



Posts: 478
Joined: 10/22/2003
Last Login: 5/6/2013
From: W BABYLON, NY, USA
Status: offline 		I agree, planes are very lite so super trac is perfect for me. i ordered some 12 inch sectons as well for the upper shelves. Just about done with my trailer.


_____________________________

Born to CRUISE, Forced to Work!

Hide Signatures

(in reply to stuffer)
       Post #: 1699

RE: Photos Of Trailer Interior Layout, Please Post Your... - 1/13/2012 4:04 PM   
stuffer


 

Posts: 314
Joined: 6/4/2003
Last Login: 4/29/2013
From: Piedmont, SC, USA
Status: offline 		well, here is the start. 2006 EZ haul 6x6x12. wait for it.......$1600.00! OK, I thought it was a good deal....

Attachments
Click to see fullsize image.
Click for fullsize


< Message edited by stuffer -- 1/13/2012 5:57 PM >

Hide Signatures

(in reply to TOFAST4U2C)
       Post #: 1700

Page:   <<   < prev  63 64 65 66 67 [68] 69 70 71 72   next >   >>  
All Forums >> RC Airplanes >> Tips & Techniques >> RE: Photos Of Trailer Interior Layout, Please Post Yours Too!!
Page: <<   < prev  63 64 65 66 67 [68] 69 70 71 72   next >   >>  




Jump to:


 
Google 



Search | Marketplace | Event Calendar | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Instructor Search | Field|Track|Marina Search

Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

SITE MAP!   : :   FORUM RULES

RC Universe is a service of Internet Brands, Inc. Copyright © 2001-2013.

Charities we support that also need your help
Yorkie Rescue | Humane Society | ASPCA | Crohn's-Colitis America


0.875RCU1