T-Maxx Servos (Full Version)

All Forums >> [RC Cars, Buggies, Trucks, Tanks and more] >> RC Monster Trucks >> Traxxas Monster Truck forum



Message

Jarret -> T-Maxx Servos (11/27/2003 6:14:44 AM)

I was rebuilding my maxx and forgot to put the servos in the correct position before turning on the radio.

Now after adjusting the throttle trim on my radio, the servos are even more messed up.

Can somebody please tell me how to reset the servos the correct way.

Also, the shifting servo has a lot of pressure against it when I turn on the radio and I can't move it by hand when the radio is on.



vtl1180ny -> RE: T-Maxx Servos (11/27/2003 1:30:13 PM)

Turn off the radio... Unscrew all the servo horns and pull them off... Turn reciever and transmitter back on... Recenter all trims... Put servo horns back on....



miserynitro -> RE: T-Maxx Servos (11/27/2003 2:33:04 PM)

He is right... but make sure you leave your gear on while doing this... just so you don't screw it up again...



Jarret -> RE: T-Maxx Servos (11/27/2003 3:47:49 PM)

Ok, thank you for the information.

Hopefully this should work.

But how do I know which way to put the servo horns back on?

Should I go by my brother's maxx?



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.15625