DOES ANYBODY REMEMBER SWIZZLE STIK?  
View related threads: (in this forum | in all forums)

Tower Hobbies
Enter up to 4 keywords or Tower stock numbers
Logged in as Guest



Users viewing this topic: none
  Printable Version
       

All Forums >> RC Airplanes >> RC Combat >> DOES ANYBODY REMEMBER SWIZZLE STIK?
Page: [1]

Login
Message << Older Topic   Newer Topic >>
DOES ANYBODY REMEMBER SWIZZLE STIK? - 12/25/2003 5:56:56 AM   
spitfire 6


 

Posts: 15
Joined: 11/27/2003
From: Westfield , MA, USA
Status: offline 		I WAS WONDERING IF ANYBODY REMEMBERED THE SWIZZLE STIK AS A COMBAT PLANE? I USED TO WATCH THE SWIZZLE STIK FIGHTS AS WE CALLED THEM AT A FIELD IN NEAR BUSHKILL PA AND ALWAYS WANTED ONE OF THOSE SIMPLE PLANES BUT NEVER GOT ONE. THEN I GOT OUT OF THE HOBBY FOR A WHILE AND AM NOW BACK I WAS HOPING TO FIND ONE NOW AS IT WOULD BE A AWESOME TRAINER. I HAVEN'T FLOWN IN AT LEAST FIFTEEN YEARS SO I THINK I SHOULD START FROM SCRATCH AGAIN I'M SURE IT WILL COME BACK QUICKLY BUT I WOULDN'T WANT TO TRASH GOOD PLANE FOR THE SAKE OF BEING OVER CONFIDENT IN MY ABILITIES ANY OF YOU GUYS KNOW WHERE COULD I PICK ONE UP? I'VE LOOKED AROUND AND HAVE COME UP EMPTY. THE INTERNET DOESN'T EVEN HAVE ANYTHING ON THEM.
       Post #: 1

RE: DOES ANYBODY REMEMBER SWIZZLE STIK? - 12/25/2003 7:05:23 PM   
CCRC1



Posts: 1109
Joined: 8/28/2002
From: Waldorf, MD, USA
Status: offline 		Spitfire, If you are refering to the swizzle stick I am thinking of, you can get a kit that is almost identical from Balsa USA called the "Stick 40" or "Stick 40 plus". The plus model has ailerons the other does not. They run about $50.

(in reply to spitfire 6)
       Post #: 2

RE: DOES ANYBODY REMEMBER SWIZZLE STIK? - 12/26/2003 8:23:10 AM   
spitfire 6


 

Posts: 15
Joined: 11/27/2003
From: Westfield , MA, USA
Status: offline 		I DON'T THINK THAT KIT IS THE SAME AS THE SWIZZLE. THE SWIZZLE WAS PRETTY MUCH A WING WITH A BOX FOR THE RADIO AND TWO STICKS OUT TO THE TAIL FEATHERS. THE SUPER SWIZZLE STIK HAD THE AILERONS THE KIT WAS ABOUT $25.00 BACK THEN AS A MATTER OF FACT I JUST FOUND ONE ON EBAY TODAY I MAY BID ON IT IF YOU WANT TO SEE WHAT I MEAN THE ITEM NUMBER IS 3165947073 THANX FOR YOUR INPUT HOPE YOU HAD A MERRY X-MAS

(in reply to CCRC1)
       Post #: 3

RE: DOES ANYBODY REMEMBER SWIZZLE STIK? - 12/26/2003 2:23:09 PM   
CCRC1



Posts: 1109
Joined: 8/28/2002
From: Waldorf, MD, USA
Status: offline 		That is exactly what the Balsa USA kit is. I have one right in front of me that my son flys as a trainer. Two spruce sticks that extend and meet at the tail and the wing mounts on top of a box that makes up the fuselage.

(in reply to spitfire 6)
       Post #: 4

RE: DOES ANYBODY REMEMBER SWIZZLE STIK? - 12/26/2003 2:43:51 PM   
CCRC1



Posts: 1109
Joined: 8/28/2002
From: Waldorf, MD, USA
Status: offline 		Isn't this what you are describing?

Attachments
Click to see fullsize image.
Click for fullsize

(in reply to CCRC1)
       Post #: 5

RE: DOES ANYBODY REMEMBER SWIZZLE STIK? - 12/30/2003 5:49:53 AM   
spitfire 6


 

Posts: 15
Joined: 11/27/2003
From: Westfield , MA, USA
Status: offline 		YEP THATS IT ABOUT 15 TO 20 YRS AGO THAT WAS THAT BEST COMBAT PLANE GOING THAT I COULD TELL AS NOBODY ELSE HAD ANYTHING DIFFERENT THERE WASN'T A POINT SYSTEM EITHER. EITHER YOU CUT THE GUYS RIBBON OR YOU DIDN'T THEY'RE EASY TO BUILD REPAIR AND FLY AS YOU SEE NOW. THEY USED TO COST ABOUT $20 AS WELL. THAT WAS ALOT OF FUN WATCHING THOSE THING GO AROUND. I GUESS NOW THE PLANES THEY HAVE ARE QUITE A BIT FASTER AND MANEUVERABLE EH? I'M STILL TRYING TO CATCH UP ON WHAT I MISSED OVER THE LAST 20 IN THIS HOBBY. ALOT HAS CHANGED I'M BUILDING A TRAINER AS WE SPEAK FROM STICKS. JUST ABOUT EVERYTHING OUT THERE IS AN ARF OR RTF. I'LL START SOLOING SOON HAVEN'T WRECKED YET HOPEFULLY I WON'T BUT I THINK I'M DREAMING. HAPPY FLYING AND CUT SOME RIBBONS FOR ME. EH! WHEN I CAN I'LL BE UP THERE TRYING TO DO THE SAME. THANX

(in reply to CCRC1)
       Post #: 6

RE: DOES ANYBODY REMEMBER SWIZZLE STIK? - 1/1/2004 7:34:15 PM   
Tattoo



Posts: 2124
Joined: 2/10/2002
From: Wichita, KS,
Status: offline 		I learned on a Swizzle stick in 1977. At the time it was $19 for the kit. Balsa USA has refined the kit, and it is now called the Stick 40, it's the same plane with a more updated tail shape and a price to match the current industry's inflation (really too bad). If something cheap to bash around is what you're looking for go to http://www.spadtothebone.com The guys who started that web site have combat roots and have used the old Swizzle sticks for combat. Much of what they do now was inspired by the simplicity of the Swizzle Stick...in fact, the very first "Spad" that flew took it's wing measurements from a Swizzle Stick.

(in reply to spitfire 6)
       Post #: 7

RE: DOES ANYBODY REMEMBER SWIZZLE STIK? - 1/17/2004 3:53:18 AM   
RCadmin



Posts: 13218
Joined: 11/28/2001
From: Belle Mead, NJ, USA
Status: offline
quote:

ORIGINAL: Tattoo

I learned on a Swizzle stick in 1977. At the time it was $19 for the kit. Balsa USA has refined the kit, and it is now called the Stick 40, it's the same plane with a more updated tail shape and a price to match the current industry's inflation (really too bad). If something cheap to bash around is what you're looking for go to http://www.spadtothebone.com The guys who started that web site have combat roots and have used the old Swizzle sticks for combat. Much of what they do now was inspired by the simplicity of the Swizzle Stick...in fact, the very first "Spad" that flew took it's wing measurements from a Swizzle Stick.



Tattoo,

Hey...we have something in common! I also took my very first flight on an RC plane with the Swizzle Stick right around the 76-77 timeframe. That was the one that got me hooked. Had the older gentleman at the field not handed his tx to me and given me a chance to fly I may have never been bit by the RC bug way back when. If I was never bit there would probably never have been an RCU! How odd...

That was cool plane to learn on. I went from that to a Cox Sportavia glider (not good) and then to a Falcon 56 MK II built from a kit. That was the one I eventually mastered flight on. It would be decades from then until I tried my 1st 3D maneuver

_____________________________

Marc
RCU Site Admin
RCU Videos. Free Video Sharing. - www.rcuvideos.com
Visit RCU''s New Banner Free E-flight Only Website: www.WattFlyer.com

(in reply to Tattoo)
       Post #: 8

RE: DOES ANYBODY REMEMBER SWIZZLE STIK? - 1/17/2004 2:10:39 PM   
rdc767


 

Posts: 65
Joined: 4/2/2002
From: Louisville, KY,
Status: offline 		Swizzle sticks and Falcon 56mk2's.
In 1978 that was the trainers to have. I built 4 of the falcons before I solo'd. Pre trainer cords. My friend had the swizzle stick. Man times have changed. I remember many days in the basement glueing up a set of wing panels and then tail panels etc. Kids don't know how easy they have it now with all the ARFS.
Ron

(in reply to RCadmin)
       Post #: 9

RE: DOES ANYBODY REMEMBER SWIZZLE STIK? - 1/17/2004 3:34:04 PM   
Tattoo



Posts: 2124
Joined: 2/10/2002
From: Wichita, KS,
Status: offline 		This is cool!!! I went through several Falcon 56's and a Senior Falcon after my Swizzlw stick! BTW, check out the first Spad...it is a rudder plane, and the wing, although Coroplast, used the dimensions from an old set of swizzle stick plans ...that first Spad wing even had ribs in it!



< Message edited by Tattoo -- 1/17/2004 2:36:11 PM >

(in reply to rdc767)
       Post #: 10

RE: DOES ANYBODY REMEMBER SWIZZLE STIK? - 1/17/2004 6:30:37 PM   
RCadmin



Posts: 13218
Joined: 11/28/2001
From: Belle Mead, NJ, USA
Status: offline
quote:

ORIGINAL: rdc767

Swizzle sticks and Falcon 56mk2's.
In 1978 that was the trainers to have. I built 4 of the falcons before I solo'd. Pre trainer cords. My friend had the swizzle stick. Man times have changed. I remember many days in the basement glueing up a set of wing panels and then tail panels etc. Kids don't know how easy they have it now with all the ARFS.
Ron



Yup...no trainer cords for me either...just get in trouble and toss the box back to the instructor. I remember spending a whole winter building that Falcon 56 with the help of a gentleman from the field (I was clueless at that age..didn't even know what a spar was!). When I see an ARF these days covered 100x better than I could for $150-$300 it blows me away still after having spent all that time building in my younger days. Today you can have a trainer like that new Hobbic NexSTAR I reviewed up and running in under 20 minutes (less time to charge built in nicads)!!!

I actually have a very old Kadet kit in the basement where the lines are drawn on the balsa (no die cut or laser cut!). How antiquated that seems now.

Tattoo - What year did the aircore trainers come out? they were coroplast right? I trained a friend of mine on an aircore plane a few years back but don't remember how long ago it was. were they before or after the home grown spads took over the world?

_____________________________

Marc
RCU Site Admin
RCU Videos. Free Video Sharing. - www.rcuvideos.com
Visit RCU''s New Banner Free E-flight Only Website: www.WattFlyer.com

(in reply to rdc767)
       Post #: 11

RE: DOES ANYBODY REMEMBER SWIZZLE STIK? - 1/17/2004 7:38:04 PM   
Tattoo



Posts: 2124
Joined: 2/10/2002
From: Wichita, KS,
Status: offline 		Aircore and Sturdy-Birdy/Dura-Plane are well before Spads. I don't know the year, but I'm thinking early 90's. The spark that lit the fuse for Spads was when a coworker of ours told us that a Pepsi sign at Wal-Mart looked like what his AirCore 40 was made from. We made some calls, and found the stuff. Up to that point, we had no idea it was just sign board and extreamly cheap. We just combined the coro wing (Aircore) and the gutterpipe fuselage (DuraPlane) with a do-it-yourself attitude and that's what Spads are all about! It's amazing when you begin to find out how much the materials in these "kits" really cost. I'll never forget the excitment when we realized that 3 or 4 airframes could be built from $20 worth of gutterpipe and coroplast ...and nothing beats a plane built from free coroplast from the gas station dumpster

< Message edited by Tattoo -- 1/17/2004 6:57:56 PM >

(in reply to RCadmin)
       Post #: 12

RE: DOES ANYBODY REMEMBER SWIZZLE STIK? - 12/4/2005 6:11:57 PM   
artillery79


 

Posts: 1
Joined: 12/4/2005
From: , IL, USA
Status: offline 		I'm attempting to find plans for the .40 version of the Stick. I learned to fly on one of those in the late 80's. I was 10 or 11. That was an excellent trainer and a hell of a sport plane when the fuse is chopped, and a fully symetrical, zero dihedral wing was bolted to it!

(in reply to Tattoo)
       Post #: 13

RE: DOES ANYBODY REMEMBER SWIZZLE STIK? - 12/5/2005 2:38:16 AM   
The sign man



Posts: 42
Joined: 6/21/2004
From: Columbia, NJ, USA
Status: offline 		We have been flying combat with swizzle sticks for 26 years now. We fly in the Poconos on Gov't land. It's the Balsa USA stick 40 with no ailerons. We all fly with 46 size engines and a stock fuse and wing. Some have foam wings that stand up to a terrific beating. I make those wings for $28.00 each. I am considering purchasing a laser cutter ( I'm a sign maker) to make stick 40 ribs so guys can make spare wings or repair damaged ones.

_____________________________

Life is short...go to the field!

(in reply to artillery79)
       Post #: 14

RE: DOES ANYBODY REMEMBER SWIZZLE STIK? - 12/5/2005 7:22:39 PM   
Clean



Posts: 994
Joined: 4/19/2002
From: Parkville, MO, USA
Status: offline 		"Those plastic planes won't never fly good, they're too heavy"
"You can't get a repeatable airfoil outta that sign material"
"I bet that thing is a bear to trim and it won't last long"


"Where can I get plans to that sucker?"

_____________________________

From Somewhere near Parkville, Mo.
William Crane (aka Mr Clean) Rever Brother #168 Time Man of the Year

(in reply to The sign man)