3 views and or cross sections for f16 center drop tank? (Full Version)

All Forums >> [RC Airplanes] >> RC Jets

Message

---

Undecided -> 3 views and or cross sections for f16 center drop tank? (1/13/2004 3:41 AM) Hello all I am in need of some 3 views and or cross sections for f16 center drop tank. Any one have any? nealnewell@aristotle.net Thanks, neal[:D]

---

Eddie Lozano -> RE: 3 views and or cross sections for f16 center drop tank? (1/13/2004 4:34 AM) What scale are you trying to make. I have an 1:5.8 scale plug right now (center and wing tank) Will take some pics later. Eddie Lozano

---

Undecided -> RE: 3 views and or cross sections for f16 center drop tank? (1/13/2004 5:10 AM) Hello Eddie Actually I am wanting a center smoke tank for my facet 2300. It needs to be 25" long, give or take a few inches. What are the dim of your tanks. I was thinking of making a tank using the lost foam method and I just didn't want to start from scratch and I thought someone would have some cross sections views of the f16 center tanks. Any help would be greatly appreciated. Thanks, Neal

---

Lou Kelm -> RE: 3 views and or cross sections for f16 center drop tank? (1/13/2004 8:57 AM) Hello Neal, I don't know if this will be of any help, but Jet-Tech (Gary Mueller) makes a scale centerline tank designed for the BVM F-16 that will carry 76oz of fuel (could be smoke oil I guess). You can check it out at the following link...it's the second item from the bottom of the page: http://www.angelfire.com/wi/jettech/page3.html Lou

---

Page: [1] 1

SITE MAP!   : :   FORUM RULES RC Universe is a service of Internet Brands, Inc. Copyright © 2001-2012.

0.15625