Zdz 40 Throttle Arm (Full Version)

All Forums >> [Glow Engines, Gas Engines, Fuel & Mfg Support Forums] >> Glow Engines



Message

spaceboy -> Zdz 40 Throttle Arm (8/15/2002 10:39:13 PM)

I just received my ZDZ 40 and I notice that the spring tension on the throttle is pretty tight. Being new to gassers I dont know if I should remove this spring or not. It seems like a lot of pressure for a servo to hold.

Any thoughts would be appreciated.



TT2 -> Zdz 40 Throttle Arm (8/16/2002 7:50:19 PM)

I plan on tossing the return spring on my ZDZ40. You're right...the spring has too much tension. It might be a good idea to replace the spring with another with less resistance in case the throttle linkage comes loose.

-Tom



Sky Viper -> Zdz 40 Throttle Arm (8/18/2002 10:11:17 PM)

[QUOTE]Originally posted by TT2
I plan on tossing the return spring on my ZDZ40. You're right...the spring has too much tension. It might be a good idea to replace the spring with another with less resistance in case the throttle linkage comes loose.

-Tom [/QUOTE]

Interesting safety concept. I suppose larger gas type engines are more dangerous.
Kinda makes you wonder why some of the glow engines don't have such a feature. It wouldn't take much spring pressure, so I doubt it would hurt the servo.



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
1.78125