CG Hangar9 Edge. (Full Version)

All Forums >> [TEAM RCU] >> TEAM RCU - Mike McConville



Message


badbradgraphics -> CG Hangar9 Edge. (11/7/2004 11:57 PM)

Hey Mike, Read you put a DA100 on yours. How much weight did you add to the tail. Just finished mine with a 3W80b2. 8411's all around with 8611 on rudder. Gas tank on the CG (not in front) 2-Receivers and 2- 1600 batteries as far back as i could get them. Batteries are actually behind the hatch opening on a shelf I added. I needed 8oz of lead in the tail to balance it out at rearward factory specs. Engine mounted with the wood adapter supplied with kit (slightly modified). Sound about right or is something way wrong.

Include some pics. I added a few graphics to "spruce things up a bit"




MMcConville -> RE: CG Hangar9 Edge. (11/8/2004 6:56 PM)

That looks AWESOME with those graphics!!! I'm surprosed you need to put lead inthe tail. Could be a bit on the tail heavy side.




badbradgraphics -> RE: CG Hangar9 Edge. (11/18/2004 8:13 PM)

Mike, The weather in Wisconsin finally cleared and I flew it. Way tail Heavy. At the end I ended up with 2 oz of tail wait. The plane balances at the forward factory suggestion mark. Flies awsum.




Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.109375