adding castor oil to fuel (Full Version)

All Forums >> [Glow Engines, Gas Engines, Fuel & Mfg Support Forums] >> RC Fuels



Message

mustangman177 -> adding castor oil to fuel (9/2/2002 4:36:12 AM)

I am using Byron's 10% nitro, 16% oil to break in an O.S. BGX 3500 engine that I would like to bring up to 20% oil. What brand castor oil should I use to do this and how much should I add ? This is my first experience adding castor oil to fuel, also where would I buy castor oil. Thanks in advance, Cary.



hauckf -> adding castor oil to fuel (9/2/2002 7:21:42 AM)

Add 6.4 oz. castor to a gallon of 16% fuel to raise the oil content to 20%. Doing so will lower the nitro to 9.5%. As to where to get castor, try your LHS. I think Morgan Fuels also sells castor, as does Klotz. Your local speed shop or motor cycle shop probably sells Klotz products. The Klotz racing castor called BeNol. I believe the castor in Wildcat fuel is Klotz Benol.



GMPheli -> adding castor oil to fuel (9/2/2002 9:11:54 PM)

Your hobby shop can also get castor from Sig.

Alan Angus



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
8.984375E-02