Futaba throttle control on Robbe BEC  
View related threads: (in this forum | in all forums)

Tower Hobbies
Enter up to 4 keywords or Tower stock numbers
Logged in as Guest



Users viewing this topic: none
  Printable Version
       



All Forums >> Electric Aircraft Universe >> Electric Training >> Futaba throttle control on Robbe BEC Page: [1]

Login
Message << Older Topic   Newer Topic >>
Futaba throttle control on Robbe BEC - 2/27/2005 2:12:05 PM   
wireman


 

Posts: 32
Joined: 5/2/2002
From: sparta, NJ, USA
Status: offline 		I recently started to resurect an old Goldburg Electra for my 14 year old to learn to fly on. I had previously used an old Futaba Conquest 4 channel and it was fine on the Robbe 620 BEC. I have siince sold that unit and was planning on using an old Futaba Gold case 6 channel. When I install it, the servos work OK but the throttle is inactive. If you plug and unplug the BEC reciever connect for the throttle, the motor will run for several seconds and stop. Just for laughs I connected my JR8103 and a reciever to the throttle connector and the throttle action was as normal. What am I missing here? Is there possibly a difference in Futaba transmitters on the the throttle side? I wouldn't expect so but this is weird! I also tried to reverse the servo on throttle. Interestingly I found that if I plugged the throttle connector from the BEC into channel 7, I had throttle control using the thumbwheel switch for aux channel. Any thoughts would be appreciated.
       Post #: 1

RE: Futaba throttle control on Robbe BEC - 2/27/2005 2:49:38 PM   
Flypaper 2



Posts: 4337
Joined: 3/29/2002
From: Kingston, ON, CANADA
Status: offline 		Throttle channel,#3 on Futaba Needs to be reversed to work. Also set idle trim as low as it will go in order to arm the ESC on many speed controls.

_____________________________

Gord
Dreamed I was a muffler. Woke up exhausted.

(in reply to wireman)
       Post #: 2

RE: Futaba throttle control on Robbe BEC - 2/28/2005 11:52:32 AM   
wireman


 

Posts: 32
Joined: 5/2/2002
From: sparta, NJ, USA
Status: offline 		Thanks flypaper but I found that channel 2 on my 127 rec is throttle and I have reversed it as well as pulled the trim all the way down. I find it very curious that my JR seems to work fine. As mentioned earlier, the old Futaba conquest 4 channel worked fine also. Oh well I got a new battery at the Wram show yesterday and I will change connectors and give that a try tonight.

(in reply to Flypaper 2)
       Post #: 3

RE: Futaba throttle control on Robbe BEC - 2/28/2005 3:33:31 PM   
Matt Kirsch



Posts: 7080
Joined: 7/5/2002
From: Rochester, NY, USA
Status: offline 		Well... That's a pretty old transmitter. Things may have been different back when that was new. A modern Futaba would work as flypaper2 described, with the throttle on 3, and the channel reversed.

Actually, that may be a Mode 1 transmitter that someone moved the throttle ratchet on. I'm betting the "up/down" stick on the right controls channel 3, right? Shouldn't matter, though.

Maybe the pulse width is different on the older tranny?

(in reply to wireman)
       Post #: 4

Page:   [1]
All Forums >> Electric Aircraft Universe >> Electric Training >> Futaba throttle control on Robbe BEC
Page: [1]





Jump to:


Google 



Search | Marketplace | Event Calendar | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Member Video Posts | RCU Video Gallery | Instructor Search | Field|Track|Marina Search

Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

Charities we support that also need your help
Yorkie Rescue | Humane Society | ASPCA | Crohn's-Colitis America

Kaango.com Classifieds

0.453RCU4