T-15 piston sleeve removal tips? (Full Version)

All Forums >> [Glow Engines, Gas Engines, Fuel & Mfg Support Forums] >> Glow Engines

Message

---

-_blood-lust_- -> T-15 piston sleeve removal tips? (3/11/2005 6:11:48 PM) ok im getting really annoyed! i cant get the piston sleeve out of this dam engine! or even the piston or any thing! any one got any tips on how i can get it out, its totally wrecked any way lol, i just can get it out of the dam crank case! plz any help would be appreciated.

---

Motorboy -> RE: T-15 piston sleeve removal tips? (3/11/2005 6:58:10 PM) Set the crankcase in owen at 250 degree celsius , then remove sleeve.. Jens Eirik

---

tIANci -> RE: T-15 piston sleeve removal tips? (3/11/2005 7:15:52 PM) Not just using an oven ... turn crank to get the piston to BDC, stick a zip tie through exhaust port, turn crank to TDC, the sleeve will pop out. We always do this with RC car engines and they are pretty tight compared with plane ones.

---

smokingcrater -> RE: T-15 piston sleeve removal tips? (3/11/2005 7:23:34 PM) the zip tie method works great even without an oven. it doesn't take much to lift it out.

---

Page: [1] 1

SITE MAP!   : :   FORUM RULES © 2001 - 2007 24-7 RC, LLC, all rights reserved.

0.078125