Expensive extentions and leads!  
View related threads: (in this forum | in all forums)

Tower Hobbies
Enter up to 4 keywords or Tower stock numbers
Logged in as Guest



Users viewing this topic: none
  Printable Version
       


NEW TENERGY 30C 2200mah 3s Lipos - FREE SHIPPING
Seller:  punkindrublik
Details:   $55.00   |  8/25/2008   |  Classified Ad
We will rotate YOUR AD in this spot if you select "Forum Featured" when placing or editing your ad!

All Forums >> Radios, Batteries, Clubhouse and more >> Batteries & Chargers >> Expensive extentions and leads!
Page: [1]

Login
Message << Older Topic   Newer Topic >>
Expensive extentions and leads! - 12/23/2001 7:42:40 AM   
FIVESQUARE



Posts: 625
Joined: 12/9/2001
From: little rock, AR, USA
Status: offline 		Hi guys,
So what do you do??
Do you buy those expensive extentions, those "Y" harnesses, or do you build them for 1/6th the cost????
I bought an extention ("Y" today for $13.
I had to have it...(LHS) I usually make my own.. What do you do? Do you have a source for the wire and connections?
Almost every plane has one.

5:

< Message edited by FIVESQUARE -- Dec 23 2001 2:46AM >

_____________________________

When things start going wrong while airborne, its like the whole world is a tuxedo, and you are a pair of brown shoes.
       Post #: 1

Expensive extentions and leads! - 12/23/2001 9:32:08 AM   
Mode1


 

Posts: 105
Joined: 12/1/2001
From: Republic , MO, USA
Status: offline 		I buy all mine. All JR. However there are several places to purchase lower cost extensions. Several on the net. Bob

(in reply to FIVESQUARE)
       Post #: 2

Expensive extentions and leads! - 12/23/2001 2:21:16 PM   
Jack Rowland


 

Posts: 21
Joined: 12/9/2001
From: Beverly Hills, MI.
Status: offline 		I'm looking for 4 and 6 pin connectors and bulk servo wiring, etc. for sailplane wing wiring. Appreciate any leads (no pun intended).
Thanks, Jack

(in reply to FIVESQUARE)
       Post #: 3

extensions and wiring - 12/23/2001 3:46:20 PM   
RC Accessory



Posts: 602
Joined: 12/7/2001
From: Tampa, FL, USA
Status: offline 		Guys, check out my web site. [url]www.rcaccessory.com[/url]

I carry all 22 gauge heavy duty wiring in all sizes and in bulk for Futaba & JR. Airtronics can be ordered. I personally have been using this same stuff for 8 years and no issues at all, very high quality. All are 100% new and individually wrapped. The prices are very good and the shipping is not high either.

Thanks!

(in reply to FIVESQUARE)
       Post #: 4

Expensive extentions and leads! - 12/23/2001 5:59:40 PM   
Hobbsy



Posts: 10552
Joined: 12/2/2001
From: Colonial Beach, VA, USA
Status: offline 		I used to make all my own with Dean's connectors when I used all ACE recievers, now I have everything converted to JR and just like Mode1, I buy them. Mostly from FMA. When I have to place a connection out in the middle of a wing I usually cut the connector off of the servo and silver solder the extension on it and shrink sleeve the three splices, that way nothing can come unplugged.

_____________________________

"I have gone faster backwards, upside down and on fire than most people have gone at all" Don Garlits

(in reply to FIVESQUARE)
       Post #: 5

leads and connectors - 12/24/2001 3:32:28 AM   
FIVESQUARE



Posts: 625
Joined: 12/9/2001
From: little rock, AR, USA
Status: offline 		Might try radical rc.
Good selection
5

_____________________________

When things start going wrong while airborne, its like the whole world is a tuxedo, and you are a pair of brown shoes.

(in reply to FIVESQUARE)
       Post #: 6

Servo wiring - 12/24/2001 3:02:34 PM   
Jackjet



Posts: 1019
Joined: 12/9/2001
From: Hesperia, CA, USA
Status: offline 		To all,
I have been making my own servo exts. and 'y' harnesses for over 20yrs.I use Radio Shack 22ga.wire-3 color (red,green and black) you get around 75ft.for $5.00


Jackjet

_____________________________

Jack Jet Williams
Hesperia,Ca

(in reply to FIVESQUARE)
       Post #: 7

Expensive extentions and leads! - 12/25/2001 2:45:37 AM   
Big_Bird



Posts: 3182
Joined: 12/18/2001
From: Arlington, TX, USA
Status: offline 		I ran into these guys at a trade show. They have really good products at great prices and only $2 shipping.

[url]www.radicalrc.com[/url]

(in reply to FIVESQUARE)
       Post #: 8

Re: extensions and wiring - 12/26/2001 1:04:22 AM   
Jim D



Posts: 324
Joined: 12/5/2001
From: Columbia, TN, USA
Status: offline 		[QUOTE]Originally posted by echapkis
Guys, check out my web site. [url]www.rcaccessory.com[/url]

I carry all 22 gauge heavy duty wiring in all sizes and in bulk for Futaba & JR. Airtronics can be ordered. I personally have been using this same stuff for 8 years and no issues at all, very high quality. All are 100% new and individually wrapped. The prices are very good and the shipping is not high either.

Thanks! [/QUOTE]

I've built my own many times, but I've also bought from Evans above and he sells the Cermark extentions at prices I can't hardly make them for. And they are NICE extensions.

_____________________________

Jim Davenport

(in reply to FIVESQUARE)
       Post #: 9

Page:   [1]
All Forums >> Radios, Batteries, Clubhouse and more >> Batteries & Chargers >> Expensive extentions and leads!
Page: [1]





Jump to:


Google 



Search | Marketplace | Event Calendar | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Member Video Posts | RCU Video Gallery | Instructor Search | Field|Track|Marina Search

Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

Charities we support that also need your help
Yorkie Rescue | Humane Society | ASPCA | Crohn's-Colitis America

Kaango.com Classifieds

2.720RCU1