Any of these TX's good?

Any of these TX's good? (Full Version)

All Forums >> [RC Helicopters] >> Electric RC Helis

Message

45mph pede -> Any of these TX's good? (4/17/2005 2:23:35 AM)
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXGAE8&P=ML http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXANT6&P=ML http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXPV52&P=7 http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXEUM1&P=ML http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXVW08&P=7 http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXKAJ2&P=7 http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXHGR3&P=7 http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXHBB4&P=7 Annnny of those will be fine, but will they work good with a Trex? -Wes

paedbo -> RE: Any of these TX's good? (4/17/2005 2:28:56 AM)
I dont know anything about those transmitters, but try to get one with as many channels as you can afford, most people will tell you dont waste your time and just buy a futaba 9ch if you can afford it, and if you cant then at least a futaba 7ch, i think the trex needs a minimum of 5 channels , but if you have a gyro that has remote gain then you need 6 channels

45mph pede -> RE: Any of these TX's good? (4/17/2005 2:36:58 AM)
Hmm... ratzafratza dangoldfreegin dang I guess I will continue saving for the futaba 7ch. Does anyone know if it comes w/o servo's some where? I realy dont want the futaba ones, and im getting a package that comes with an align RX and 6oz servo's, so I wont need them... -Wes

paedbo -> RE: Any of these TX's good? (4/17/2005 3:15:05 AM)
http://servocity.com/html/7ch_transmitter.html

Shard -> RE: Any of these TX's good? (4/18/2005 9:36:49 PM)
IMHO I would not recommend getting Align servos. I used their tail servo and was getting alot of "wagging" which went away when I replaced it with HS-50 (and it wasn't wagging cause my mix was set to high)

Page: [1]

SITE MAP! : : FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

0.125