Keith Sparks A-10 Warthog buildup    Gallery
View related threads: (in this forum | in all forums)

Logged in as Guest



Users viewing this topic: none
    Search This Thread  
 
Printable Version

All Forums >> RC Airplanes >> Twin & Multi Engine RC Aircraft >> Keith Sparks A-10 Warthog buildup
Page: [1] 2 3   next >   >>  

Tower Hobbies Today's Special Offer! Brands Products
Login
Message << Older Topic   Newer Topic >>
Keith Sparks A-10 Warthog buildup - 7/7/2005 7:15 AM   
LILFREDDIE



Posts: 43
Score: 100
Joined: 10/17/2004
Last Login: 12/9/2011
From: HOUMA, LA, USA
Status: offline 		Richard Guidroz, a friend of mine is building a Keith Sparks design A-10. I will be posting pictures of the build up. stay tuned.......


2 GMS .32's
2 hayes 6 oz fuel tanks
5 hitec 311 standard servos
2 9x6 apc props
a set of Keith Sparks plastics


Hide Signatures
       Post #: 1

RE: Keith Sparks A-10 Warthog buildup - 7/7/2005 8:36 AM   
Canuck1



Posts: 1765
Score: 100
Joined: 7/2/2002
Last Login: 2/5/2012
From: Edmonton, AB,
Status: offline 		Sounds like it will be a great project. The A-10 is an outstanding airframe!!!

Craig

_____________________________

Eat, Sleep, Fly

Hide Signatures

(in reply to LILFREDDIE)
       Post #: 2

RE: Keith Sparks A-10 Warthog buildup - 7/9/2005 5:36 AM   
LILFREDDIE



Posts: 43
Score: 100
Joined: 10/17/2004
Last Login: 12/9/2011
From: HOUMA, LA, USA
Status: offline 		Here are a few pictures of the build up! Thats Mr. Richard holding the center section for the wing.

Attachments
Click to see fullsize image.
Click for fullsize 		Click to see fullsize image.
Click for fullsize 		Click to see fullsize image.
Click for fullsize 		Click to see fullsize image.
Click for fullsize
Click to see fullsize image.
Click for fullsize


Hide Signatures

(in reply to Canuck1)
       Post #: 3

RE: Keith Sparks A-10 Warthog buildup - 7/9/2005 7:26 AM   
SIMCO



Posts: 266
Score: 100
Joined: 5/20/2003
Last Login: 2/7/2012
From: N.Richland Hills, TX, USA
Status: offline 		Keith flys at the local club. YOU SHOULD SEE THIS A/C FLY!!!! Too cool!!!

Hide Signatures

(in reply to LILFREDDIE)
       Post #: 4

RE: Keith Sparks A-10 Warthog buildup - 7/13/2005 4:40 AM   
LILFREDDIE



Posts: 43
Score: 100
Joined: 10/17/2004
Last Login: 12/9/2011
From: HOUMA, LA, USA
Status: offline 		here are a few of fuse with wing going together

Attachments
Click to see fullsize image.
Click for fullsize 		Click to see fullsize image.
Click for fullsize


Hide Signatures

(in reply to SIMCO)
       Post #: 5

RE: Keith Sparks A-10 Warthog buildup - 7/13/2005 6:55 AM   
c130nut


 

Posts: 350
Score: 100
Joined: 9/9/2003
Last Login: 12/13/2011
From: Madison, MS, USA
Status: offline 		Where do you get the plans?
Bill R.

_____________________________

Billy Richardson, C130nut
Madison, MS

Hide Signatures

(in reply to LILFREDDIE)
       Post #: 6

RE: Keith Sparks A-10 Warthog buildup - 7/13/2005 5:27 PM   
LILFREDDIE



Posts: 43
Score: 100
Joined: 10/17/2004
Last Login: 12/9/2011
From: HOUMA, LA, USA
Status: offline 		Here is a link to Model Airplane News and an address for the plastic parts from Mr. Keith Sparks. The article in Model Airplane News has Mr. Keith Sparks contact info.

http://www.modelairplanenews.com/plan/fsp0701a.asp

PARTS
Yes, I still make the parts. The article said that the parts will cost $30, there is a problem. The white plastic that was used is polystyrene,$7 per sheet. The problem is that after it is exposed to fuel and vibration it cracks after around 10 to 15 flights, this just wont do. The article is 3 years old and so is the plane. After trying different mounting designs; I had to switch to PETG plastic for the cowl. that's $19 per sheet.
1 set = 4 cowl halves, 2 upper and lower wheel wells, The round part at the aft tip of the fuselage. the instrument panel, cockpit seat and canopy. So the bad news is that I have to charge $40 for the parts plus $4 shipping I'm sorry for the price change, I'd rather apologize for the price rather than the parts.
TO ORDER THE PARTS
Send a $44 check or money order ( m.o. is faster) to:
Keith Sparks
7755 Nor-east Dr.
Fort Worth Texas
76180-6805

< Message edited by LILFREDDIE -- 7/26/2005 6:33 AM >

Hide Signatures

(in reply to c130nut)
       Post #: 7

RE: Keith Sparks A-10 Warthog buildup - 7/13/2005 6:27 PM   
Connery



Posts: 840
Score: 100
Joined: 4/25/2004
Last Login: 11/2/2009
From: Tyler, TX, USA
Status: offline 		The more I see of that plane the more it really makes me want to build it. I have some old plans that I bought like 20 years ago that is designed for a .60 2 stroke to be mouned in the nose. I've thought about building it, but when I saw these plans with the twin .25's in the engine pods and decided not to. I'd like to see more pictures of the build and the finished plane if possible. I assume looking at the posted pictures that it is designed with fixed landing gear, but do you think there is enough room in the wing pods for small retracts?

Hide Signatures

(in reply to LILFREDDIE)
       Post #: 8

RE: Keith Sparks A-10 Warthog buildup - 7/13/2005 6:34 PM   
LILFREDDIE



Posts: 43
Score: 100
Joined: 10/17/2004
Last Login: 12/9/2011
From: HOUMA, LA, USA
Status: offline 		Yes as a matter of fact it normaly needs nose weight. I spoke with Keith Sparks and he said retracts would be fine. Keith was very informative and the plastics that I got from him were very nice.

Hide Signatures

(in reply to Connery)
       Post #: 9

RE: Keith Sparks A-10 Warthog buildup - 7/26/2005 3:38 AM   
sina



Posts: 64
Score: 100
Joined: 10/6/2004
Last Login: 3/4/2007
From: medford, NJ, USA
Status: offline 		Way cool...

I am building the same plane also. I am stuck in a couple of places. I'd appreciate your friend answering them if possible?

Where do doublers D1 and D2 go and when do you glue them on?

Here are some pictures of mine with retract positions as I figured them.

Any help is appreciated.

Thanks,

Sina


Attachments
Click to see fullsize image.
Click for fullsize 		Click to see fullsize image.
Click for fullsize 		Click to see fullsize image.
Click for fullsize


_____________________________

A good day is when you go home all in one piece. A fun day is when you sneak in the back so that she doesn't see the pieces

Hide Signatures

(in reply to LILFREDDIE)
       Post #: 10

RE: Keith Sparks A-10 Warthog buildup - 7/26/2005 6:29 AM   
LILFREDDIE



Posts: 43
Score: 100
Joined: 10/17/2004
Last Login: 12/9/2011
From: HOUMA, LA, USA
Status: offline 		Here are some more pics of the build up. Mr. richard is a quick builder! I can't keep up with the pics.... i'll get back with Richard on d1 and d2.

Attachments
Click to see fullsize image.
Click for fullsize 		Click to see fullsize image.
Click for fullsize 		Click to see fullsize image.
Click for fullsize 		Click to see fullsize image.
Click for fullsize
Click to see fullsize image.
Click for fullsize 		Click to see fullsize image.
Click for fullsize


Hide Signatures

(in reply to sina)
       Post #: 11

RE: Keith Sparks A-10 Warthog buildup - 7/26/2005 6:36 AM   
LILFREDDIE



Posts: 43
Score: 100
Joined: 10/17/2004
Last Login: 12/9/2011
From: HOUMA, LA, USA
Status: offline 		the following is from Keith Sparks F.A.Q. list if you would like all the F.A.Q. i can email them to you. hope this helps

How does D1 and D2 fit?
D-2 is a little smaller and fits against D-1.
This extra balsa was needed so you can sand a radius in the fuselage just aft of the canopy and forward of former 4 (F-4).
Personaly I preffer to use wood workers glue because CA causes hard spots in the skin and shows through when you monocote. I used allot of "T" pins to hold the doublers in place while the glue dried.


< Message edited by LILFREDDIE -- 7/26/2005 6:38 AM >

Hide Signatures

(in reply to sina)
       Post #: 12

RE: Keith Sparks A-10 Warthog buildup - 7/27/2005 5:57 AM   
sina



Posts: 64
Score: 100
Joined: 10/6/2004
Last Login: 3/4/2007
From: medford, NJ, USA
Status: offline 		Thanks. I have the same FAQ from Keith, but still can't figure out if I am suppose to glue D1/D2 to the skin before bending it around or after? If after, then does it go on the inside? thanks, Sina

_____________________________

A good day is when you go home all in one piece. A fun day is when you sneak in the back so that she doesn't see the pieces

Hide Signatures

(in reply to LILFREDDIE)
       Post #: 13

RE: Keith Sparks A-10 Warthog buildup - 7/28/2005 7:29 PM   
Jerry Sigur


 

Posts: 370
Score: 100
Joined: 12/7/2001
Last Login: 2/5/2012
From: Houma, LA, USA
Status: offline 		I dunno Freddie, it looks poorly and cheaply built! (private joke folks, no actual insult)
Hope to see it fly soon.

Jerry


_____________________________

Cajun Black Sheep Flyers
Friends come and go, but enemies accumulate.

Hide Signatures

(in reply to sina)
       Post #: 14

RE: Keith Sparks A-10 Warthog buildup - 7/29/2005 4:30 AM   
LILFREDDIE



Posts: 43
Score: 100
Joined: 10/17/2004
Last Login: 12/9/2011
From: HOUMA, LA, USA
Status: offline 		Mr. Richard said he trashed d1 and d2 and made his own pieces. They fit on the top of the plane right below the pilot. He also added a piece of stock balsa below them so he had something to glue it to. whew! hope this helps

Hide Signatures

(in reply to sina)
       Post #: 15

RE: Keith Sparks A-10 Warthog buildup - 8/9/2005 6:56 AM   
sina



Posts: 64
Score: 100
Joined: 10/6/2004
Last Login: 3/4/2007
From: medford, NJ, USA
Status: offline 		I just posted a bunch of picutres of my fuse progressing, here: http://www.rcuniverse.com/forum/fb.asp?m=3244210

_____________________________

A good day is when you go home all in one piece. A fun day is when you sneak in the back so that she doesn't see the pieces

Hide Signatures

(in reply to LILFREDDIE)
       Post #: 16

RE: Keith Sparks A-10 Warthog buildup - 8/9/2005 3:57 PM   
LILFREDDIE



Posts: 43
Score: 100
Joined: 10/17/2004
Last Login: 12/9/2011
From: HOUMA, LA, USA
Status: offline 		SINA YOU ARE OFF TO A GREAT START, WHAT ENGINE COMBO?

Hide Signatures

(in reply to sina)
       Post #: 17

RE: Keith Sparks A-10 Warthog buildup - 8/9/2005 4:13 PM   
LILFREDDIE



Posts: 43
Score: 100
Joined: 10/17/2004
Last Login: 12/9/2011
From: HOUMA, LA, USA
Status: offline 		PICTURES OF WARTHOG GETTING COVERED. ALMOST DONE!

Attachments
Click to see fullsize image.
Click for fullsize 		Click to see fullsize image.
Click for fullsize


Hide Signatures

(in reply to sina)
       Post #: 18

RE: Keith Sparks A-10 Warthog buildup - 8/10/2005 2:49 AM   
sina



Posts: 64
Score: 100
Joined: 10/6/2004
Last Login: 3/4/2007
From: medford, NJ, USA
Status: offline 		Nice. How did he do the covering? I'll be shoping for mine soon. I'd appreciate the monokote number for the olive and the cream. sina

_____________________________

A good day is when you go home all in one piece. A fun day is when you sneak in the back so that she doesn't see the pieces

Hide Signatures

(in reply to LILFREDDIE)
       Post #: 19

RE: Keith Sparks A-10 Warthog buildup - 9/16/2005 11:04 PM   
Connery



Posts: 840
Score: 100
Joined: 4/25/2004
Last Login: 11/2/2009
From: Tyler, TX, USA
Status: offline 		Any updates?

Also, does anyone know any of the laser cutters that will cut the parts for this plan?

Hide Signatures

(in reply to sina)
       Post #: 20

RE: Keith Sparks A-10 Warthog buildup - 9/17/2005 3:36 AM   
sina



Posts: 64
Score: 100
Joined: 10/6/2004
Last Login: 3/4/2007
From: medford, NJ, USA
Status: offline 		You can buy the "short-kit" from this guy for $95 http://www.tanks-hangar.com/Store/store.html

I ended up doing my own.

I picked up one of the two .25Fx n eBay. Looking for the second one. I got as far as aligning all the parts to install. Taking my time as I tend to mess up at this stage.

Will post pictures on my other thread as I will be covering soon.

Sina

_____________________________

A good day is when you go home all in one piece. A fun day is when you sneak in the back so that she doesn't see the pieces

Hide Signatures

(in reply to Connery)
       Post #: 21

RE: Keith Sparks A-10 Warthog buildup - 9/17/2005 10:27 PM   
LILFREDDIE



Posts: 43
Score: 100
Joined: 10/17/2004
Last Login: 12/9/2011
From: HOUMA, LA, USA
Status: offline 		the colors and numbers are as follows

olive drab green solartex 2 meter roll #557 this is from Balsa USA 800-225-7287

creme monokote th3127
dove gray monokote th3131


the plane is finished we have been breaking in the engines and fine tuning the carbs then Katrina struck. we are all alright but have not been flying since the storm. and then the mower at the flying field died, we are in the process of getting a new mower. when we maiden the A-10 i will try and get some digital video! stay tuned............

Attachments
Click to see fullsize image.
Click for fullsize 		Click to see fullsize image.
Click for fullsize


Hide Signatures

(in reply to sina)
       Post #: 22

RE: Keith Sparks A-10 Warthog buildup - 11/12/2005 6:35 PM   
Flying Hog



Posts: 411
Score: 100
Joined: 6/1/2002
Last Login: 1/25/2012
From: Waterford, CT, USA
Status: offline 		Any Updates??? I'm getting ready to order my cut kit from Tanks... I can't wait to get started on my A-10

_____________________________

Bob

Hide Signatures

(in reply to LILFREDDIE)
       Post #: 23

RE: Keith Sparks A-10 Warthog buildup - 3/29/2006 12:37 PM   
Sneakypete_uk


 

Posts: 2
Score: 100
Joined: 10/3/2005
Last Login: 12/20/2006
From: WaterbeachCB5 9NN, UNITED KINGDOM
Status: offline 		Hi guys

At last i've found some people with the same kit
I've just got the plans, plastic kit and the wood kit
Going to get a 8'x4' sheet of ply at the weekend and hopefully start building soon.

This is my first hand built model too, so i hope you guys don't mind me asking question as and when i get stuck!

Hide Signatures

(in reply to Flying Hog)
       Post #: 24

RE: Keith Sparks A-10 Warthog buildup - 3/29/2006 5:54 PM   
LILFREDDIE



Posts: 43
Score: 100
Joined: 10/17/2004
Last Login: 12/9/2011
From: HOUMA, LA, USA
Status: offline 		well the plane was in a severe crash due to one engine flaming out! Mr. Richard Guidroz rebuilt it with one engine and it fly's nicely. I'll get some pictures up soon

Hide Signatures

(in reply to Flying Hog)
       Post #: 25

Page:   [1] 2 3   next >   >>  
All Forums >> RC Airplanes >> Twin & Multi Engine RC Aircraft >> Keith Sparks A-10 Warthog buildup
Page: [1] 2 3   next >   >>  




Jump to:


 
Google 



Search | Marketplace | Event Calendar | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Instructor Search | Field|Track|Marina Search

Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

SITE MAP!   : :   FORUM RULES

RC Universe is a service of Internet Brands, Inc. Copyright © 2001-2012.

Charities we support that also need your help
Yorkie Rescue | Humane Society | ASPCA | Crohn's-Colitis America


0.781RCU1