mt2 diff prob (Full Version)

All Forums >> [RC Cars, Buggies, Trucks, Tanks and more] >> RC Nitro Stadium Trucks



Message

zsar1 -> mt2 diff prob (8/26/2005 9:50 PM)

hi.i dont know why but my mt2 diffs are troubling me.i already put a 2 washers on the ecah diff.there was no play at all.after 4 tanks with my os 18 the diff started to slip again.does anyone have any solutions because this is really irratating me.



McFlyss -> RE: mt2 diff prob (8/30/2005 6:15 PM)

Hi there.
Search the 'Official MT2 thread' and all your answers will be complete.



46u -> RE: mt2 diff prob (8/30/2005 10:25 PM)

Make sure you run the heavy-duty gears and when shimming you need a little play. All so make sure you are running the cast metal spider gears and not the pot metal ones. All so make sure you have your slipper clutch set right.

Here are some links

http://www2.towerhobbies.com/cgi-bin/wti0001p?&W=000294237&I=LXJYM2&P=K

http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXBTA4&P=Z



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

RC Universe is a service of Internet Brands, Inc. Copyright © 2001-2013.
0.109375