Posts: 1720
Joined: 5/1/2006 From: Richmond,
VA, USA Status: offline
i would not think its a good idea to spray the chasis down unless all the parts with bearings in them are off of it. Water might work its way in a a bearing or 2 and rust the inside out and cause the bearing to have a catastrophic failer when running and cause other damage as well.
This is my RC10GT2 and it has a non ported head, dynamite sport tuned exaust (single chamber), O.S .18CVR engine, 2 hitec servo's, failsafe Dirt hawg tires. RPM 6 spoke rims, 5cell hump pack
Posts: 1314
Joined: 7/10/2006 From: riverside, CA, USA Status: offline
If i had batteries for my camera i would post pics of my x-c. It has a "new"(run once with body but had it scince cristmas) and need a piston/sleeve. No hopups all stock accept for a humpack 1100mah reciever battery.
Posts: 3643
Joined: 3/15/2007 From: Sarasota, FL, USA Status: offline
quote:
ORIGINAL: ProRCRacer88
i would not think its a good idea to spray the chasis down unless all the parts with bearings in them are off of it. Water might work its way in a a bearing or 2 and rust the inside out and cause the bearing to have a catastrophic failer when running and cause other damage as well.
Well normally i would not recommend the hose down but. Did you see his truck? There is dirt CAKED on there. I mean there must be an extra 5 lbs of dirt on that thing.
quote:
ORIGINAL: dude54325
Its okay to use nitro leaner inside the engine. Right??
I am pretty sure and have done it a couple of times my self but only with the engine disassembled or mostly taken apart. And when i was done i soaked everything with ARO. I would not recommened just sparying some in the glow hole or carb.
_____________________________
Florida Gods Waiting RoomCheck Gallery for Pictures Jato 3.3 |Cen Nemesis (working...) |Lunchbox |ST-15 |Mario Kart D
thanks if put so much into this truck its my baby lol well i have a warhead evo 2 all aluminnum and im thinking of dropiing a o.s 30vg or 21... or mabe evan axial 32spec or the 228 race spec
I cant recall if I posted up to date pictures of my evader on here. So here it is again maybe.
This really is an under rated truck. With a few upgrades like steering servo, wheels, and eventually a new engine. These things make real strong bashers.
Posts: 194
Joined: 10/10/2006 From: Seaside,
CA, USA Status: offline
For any of you who have not visited the MT2 thread and seen them already, here are some pics of my prostitute, errr, car. It is nearly the same, I give her lots of money, and she shows me a good time! It has been a great car with few problems, other than the underpowered RTR engine. It now happily sports an OS CV-RX and is now seen as a very blurry spec as it screams by. The perfect package- speed, acceleration and handling.
< Message edited by catbutt -- 9/8/2007 6:29:14 AM >
_____________________________
You can do it your own way- if its done just how I say Evil will always triumph because good is dumb
Printable Version
All Forums >> RC Cars, Buggies, Trucks, Tanks and more >> RC Nitro Stadium Trucks >> RE: Stadium Truck Gallery v.2 
RE: Stadium Truck Gallery v.2 - 
