|
bfrunner -> RE: walkera 22D out of control (12/22/2006 11:01:05 PM)
|
To clear things up about using an external HH gyro with the 22D's 4n1, you can install a seperate gyro with the stock 4n1 on the 22D. First unplug the rudder servo from slot 5, then you will need to plug the HH gyro into slot 4 on the reciever, and plug the rudder servo into the HH gyro. Slot 4 and 5 on the 22D's reciever will control the rudder servo, but slot 5 has the mixing and is the output for the internal gyro which the rudder servo is plugged into for the stock configuration. Slot 4 on the 4n1 does not have any mixing nor is an output for the internal gyro but will drive the rudder servo from the TX. I use a seperate HH gyro with my stock 22d's 4n1 and it holds the tail great! I use a g006 gyro which although on the bulky side works great.
|
|
|
|