27% ultimate  
View related threads: (in this forum | in all forums)

Tower Hobbies
Enter up to 4 keywords or Tower stock numbers
Logged in as Guest



Users viewing this topic: none
  Printable Version
       

All Forums >> RC Airplanes >> Giant Scale Aircraft - 3D & Aerobatic >> Aero-Works Support >> 27% ultimate
Page: [1]

Login
Message << Older Topic   Newer Topic >>
27% ultimate - 1/29/2006 12:27:13 AM   
myoung


 

Posts: 9
Joined: 1/5/2005
From: Jerseyville, IL, USA
Status: offline 		I have a question about engines. In the aeroworks manual they set up the plane with a Brison 3.2. Was any extra nose weight necessary to properly balance that plane.
       Post #: 1

RE: 27% ultimate - 1/29/2006 2:16:04 AM   
Mark Dennis



Posts: 1359
Joined: 2/24/2004
From: Parker, CO, USA
Status: offline 		No the plane balanced fine using the brison and we were able to get it balanced just by moving the batteries around.

_____________________________

Team Aeroworks
Thank You: Aeroworks, Desert Aircraft, and Smart-Fly

(in reply to myoung)
       Post #: 2

RE: 27% ultimate - 1/31/2006 4:58:09 PM   
khan


 

Posts: 21
Joined: 10/11/2002
From: CaracasMiranda, VENEZUELA
Status: offline 		I have mine with a DA-50 batteries are on either side just in front of the rudder servo. Torque rolls etc. like a dream. Don't think you need any extra weight, just the batteries further back.

(in reply to Mark Dennis)
       Post #: 3

RE: 27% ultimate - 2/10/2006 4:55:31 AM   
captinjohn


 

Posts: 6186
Joined: 1/25/2002
From: Hesperia, MI, USA
Status: offline 		I have a question. Is there a setup so you can elimate any or all Y harness...I think 3 are needed. Can you use seperate channels on a computor radio or use a match box? Thanks Capt,n

_____________________________

I never met a engine I did not like !

(in reply to khan)
       Post #: 4

RE: 27% ultimate - 2/10/2006 11:39:31 PM   
Mark Dennis



Posts: 1359
Joined: 2/24/2004
From: Parker, CO, USA
Status: offline 		You could use a match box or just y them together and mix both sides in on the radio.

_____________________________

Team Aeroworks
Thank You: Aeroworks, Desert Aircraft, and Smart-Fly

(in reply to captinjohn)
       Post #: 5

RE: 27% ultimate - 2/11/2006 12:07:44 AM   
captinjohn


 

Posts: 6186
Joined: 1/25/2002
From: Hesperia, MI, USA
Status: offline 		In the "mix both sides" with the radio...is it possible with a JRx347 radio? I wish there was a forum just for RC radio gear hook-ups with photos. One photo is wort a thousand words.

_____________________________

I never met a engine I did not like !

(in reply to Mark Dennis)
       Post #: 6

RE: 27% ultimate - 2/11/2006 12:13:14 AM   
Mark Dennis



Posts: 1359
Joined: 2/24/2004
From: Parker, CO, USA
Status: offline 		Not sure on that specific radio all you need is flaperon mixing in order to do it.

_____________________________

Team Aeroworks
Thank You: Aeroworks, Desert Aircraft, and Smart-Fly

(in reply to captinjohn)
       Post #: 7

RE: 27% ultimate - 2/14/2006 1:06:16 AM   
captinjohn


 

Posts: 6186
Joined: 1/25/2002
From: Hesperia, MI, USA
Status: offline 		Yes the JR 347 does have flaperon mix. I guess I will mess around with it and see what happens. I believe I can do that with radio gear setting on bench. Just watch and se what servos do. Right? Thanks Capt,n

_____________________________

I never met a engine I did not like !

(in reply to Mark Dennis)
       Post #: 8

RE: 27% ultimate - 2/14/2006 1:21:09 AM   
Mark Dennis



Posts: 1359
Joined: 2/24/2004
From: Parker, CO, USA
Status: offline 		You can but i find it easier if they are in the plane if you have them in do it in the plane if not you will have to install them sometime why not now?

_____________________________

Team Aeroworks
Thank You: Aeroworks, Desert Aircraft, and Smart-Fly

(in reply to captinjohn)
       Post #: 9

RE: 27% ultimate - 2/15/2006 4:24:36 AM   
myoung


 

Posts: 9
Joined: 1/5/2005
From: Jerseyville, IL, USA
Status: offline 		I have a zenoah g62 that has been converted to electronic igniton and lightened. Engine with ignition included is right at 4 lb. What are your thoughts of this engine on the 27% ultimate.

(in reply to Mark Dennis)
       Post #: 10

RE: 27% ultimate - 2/15/2006 9:20:33 PM   
Mark Dennis



Posts: 1359
Joined: 2/24/2004
From: Parker, CO, USA
Status: offline 		It will work but you will add weight to the plane the way i figure it is if you have it put it on a fly it if not get a DA. It is a strong motor though so it should have plenty of power.

_____________________________

Team Aeroworks
Thank You: Aeroworks, Desert Aircraft, and Smart-Fly

(in reply to myoung)
       Post #: 11

RE: 27% ultimate - 5/31/2006 7:08:12 PM   
mikec3d


 

Posts: 65
Joined: 11/3/2005
From: schertz, TX, USA
Status: offline 		When if ever do you plan on another ultimate ,say 50cc qb , like yak,260?

(in reply to Mark Dennis)
       Post #: 12

Page:   [1]
All Forums >> RC Airplanes >> Giant Scale Aircraft - 3D & Aerobatic >> Aero-Works Support >> 27% ultimate
Page: [1]





Jump to: