having problems (Full Version)

All Forums >> [RC Cars, Buggies, Trucks, Tanks and more] >> [HPI Racing] >> HPI Off-Road



Message

reggie150 -> having problems (1/30/2006 5:19:11 PM)

hi all bought a mt2 built it my self got it running then it died think clutch is slippin cos engine is still runnin any ideas



benzzyo5 -> RE: having problems (2/2/2006 1:29:29 AM)

if it died how is the engine still running



reggie150 -> RE: having problems (2/2/2006 4:37:34 PM)

think clutch is slippin cos engine is still runnin any ideas


ok i didnt totally die just didnt want to go any where



reggie150 -> RE: having problems (2/2/2006 7:55:08 PM)

also there any conversion kits so i can get rid of this pull start



benzzyo5 -> RE: having problems (2/2/2006 9:53:52 PM)

i'm not sure about the coversions i'm more of a savage freak. but about that no go, if u had ur car for a while it might be slipping but it car also be the spur gear maybe u stripped it chek the teeth also chek the teeth on ur cluchbell make sur nothing is stripped[;)] another think check ur mesh make sure it's not to loose



reggie150 -> RE: having problems (2/4/2006 10:43:50 AM)

stripped the teeth off it is there a metal replacment they do



benzzyo5 -> RE: having problems (2/7/2006 11:45:54 PM)

like i said i'm more of a savage freak but yeah there are replacments go to the website u bought it on they'll have them or if u have a local hobbyshop bring in ur car they will hook u up because there pretty hard to install if it's the first time for u
\

nick



benzzyo5 -> RE: having problems (2/7/2006 11:51:49 PM)

also if u bring it in a hobbystore and install it for u ask if the mesh is good this is how u strip things. if u have to do it i recondmend u try not and bring it somewhere. i remember the first time i did it i got a brand new spur and the first 5 minutes i stripped it again cuz the mesh was not correct. u have to make sure the mesh is correct.[8D]

nick



reggie150 -> RE: having problems (2/11/2006 7:07:57 PM)

will savage parts fit on mine
or and thxs for the advise



benzzyo5 -> RE: having problems (2/12/2006 1:34:11 AM)

like i say i'm a savage freak i don't know. y do u want to get a spur gear but u can only find one for a savage?



reggie150 -> RE: having problems (2/12/2006 10:24:19 AM)

yes its a savage one it was the only metal one i could find



benzzyo5 -> RE: having problems (2/12/2006 3:34:32 PM)

i'm not sure if u still have ur old spur then put them up to eachother see if there the same size



reggie150 -> RE: having problems (2/12/2006 9:05:32 PM)

will have to wait for it to arrive y would they make it plastic in the first place



benzzyo5 -> RE: having problems (2/12/2006 10:52:55 PM)

i don't know maybe it's just because of the kind of car it is. they just made it like that



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.1542969