transmitter help  
View related threads: (in this forum | in all forums)

Tower Hobbies
Enter up to 4 keywords or Tower stock numbers
Logged in as Guest



Users viewing this topic: none
  Printable Version
       



All Forums >> RC Airplanes >> RC Flight Simulator Software >> Ikarus AeroFly Pro and Aerofly Pro Deluxe >> transmitter help Page: [1]

Login
Message << Older Topic   Newer Topic >>
transmitter help - 2/12/2006 2:30:24 AM   
youngpilot


 

Posts: 59
Joined: 11/25/2004
From: waterford, CA, USA
Status: offline 		i have a very old futaba fg series radio. i bought it for $45 (rip off i know) and planed to use it just for the sim. i lug it into the interface and, nothin. aerofly pro says that it cant find a transmitter or what ever. i dont know what the problem is. your help would be greatly appreciated.

_____________________________

Tolerate no unclenliness of body, cloths or habitation.
-Bejamine Franklin
       Post #: 1

RE: transmitter help - 2/12/2006 3:08:35 AM   
STLPilot


 

Posts: 9110
Joined: 3/12/2003
From: Manhattan, NY, USA
Status: offline 		I assume you are using a genuine AFP Interface cable?

_____________________________

Here At The Wall

(in reply to youngpilot)
       Post #: 2

RE: transmitter help - 2/15/2006 4:21:46 AM   
youngpilot


 

Posts: 59
Joined: 11/25/2004
From: waterford, CA, USA
Status: offline 		yes

_____________________________

Tolerate no unclenliness of body, cloths or habitation.
-Bejamine Franklin

(in reply to STLPilot)
       Post #: 3

RE: transmitter help - 2/15/2006 11:34:55 AM   
STLPilot


 

Posts: 9110
Joined: 3/12/2003
From: Manhattan, NY, USA
Status: offline 		Do you have any other radios to try? If it works on 1 radio, then it's most likely the DSC port on the radio.

_____________________________

Here At The Wall

(in reply to youngpilot)
       Post #: 4

RE: transmitter help - 2/15/2006 3:30:47 PM   
youngpilot


 

Posts: 59
Joined: 11/25/2004
From: waterford, CA, USA
Status: offline 		i have a futaba 7cap that i want to try but i dont have the connection to try it with. i cant order it because i have no credit card. i do have a trainer cord the has the right connection and if i had somone to tell me how to wire it up i could try it. all i would have to do is pell apart the connector and solder the wires to the pins.
on my trainer cord the connection has four wiresone red on the top left pin one white on the top middle pin one yellow on the bottom left pin, and one black on the bottom middle pin. i could cut the adapter i have that has the old style connector and solder those wires to the new connection. only proble3m is that i dont know what pins to solder to the pin. any one could easily pull apart their connecter and tell me. the sqare connecter comes apart very easily and you cant damage the connection. i could sure use the help, zack

_____________________________

Tolerate no unclenliness of body, cloths or habitation.
-Bejamine Franklin

(in reply to STLPilot)
       Post #: 5

Page:   [1]
All Forums >> RC Airplanes >> RC Flight Simulator Software >> Ikarus AeroFly Pro and Aerofly Pro Deluxe >> transmitter help
Page: [1]





Jump to:


Google 



Search | Marketplace | Event Calendar | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Member Video Posts | RCU Video Gallery | Instructor Search | Field|Track|Marina Search

Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

Charities we support that also need your help
Yorkie Rescue | Humane Society | ASPCA | Crohn's-Colitis America

Kaango.com Classifieds

0.547RCU1