But would it be possible to make the middle of the fan more smaller? The silver point in the midle of the fan is very large..? Or is it natural scale?
Absolutely fabulous Aircraft, Im now thinking about gettin one of Ians Airplanes my self. The Super Airliner from E-flite is too expencive here in Norway compared to the prices in the States for an example.
Posts: 112
Joined: 8/20/2004 From: Queensland, , AUSTRALIA Status: offline
Did some taxi tests of 307 today. Really love the way the engines behaved -nice jet sound. On 7s, there is a lot of power their (not that it is needed). Didi not get past 3 notchs on throttle.
Posts: 40
Joined: 4/5/2004 From: plano, TX, USA Status: offline
Folks,
I have completed which I have been planning for some time: drilled the holes for all windows on the fuselage skins. There will be a thin, transparent layer behind the holes, when I finish the fuselage assembly. I am making slow progress but I move forward, I will keep posting pictures.
Thanks Serdar
NOTE: The holes are exactly the same shape and size, and they are perfectly clean with no jagged edges. I have made the pictures small so that they upload faster. That is why the picture quality is very poor and the holes look as if they have jagged edges.
< Message edited by serdark -- 11/20/2006 1:29:36 AM >
Posts: 40
Joined: 4/5/2004 From: plano, TX, USA Status: offline
Here is a close-up image of the holes on the front fuselage section. Holes are cut using a home made device which is an attachment to a low temperature covering iron.
Printable Version
All Forums >> Electric Aircraft Universe >> Electric RC Jets >> RE: EDF Airliner build thread 
RE: EDF Airliner build thread - 
