RE: WALKERA 37 (Full Version)

All Forums >> [RC Helicopters] >> Electric RC Helis >> Walkera Helis - Dragonfly, etc..



Message


babyhuey -> RE: WALKERA 37 (1/2/2008 3:02:32 AM)

Sorry guys, I thought that this thread had died.

Did you try reversing your gyro? It sounds like that might be the problem.
If you have control of the Helis direction (forward-back, left-right) then those servos are hooked up correctly. Channel three is the esc, four is always rudder, five is the gear channel, six is the pitch, and seven is gyro adjust if you have that feature.
Check that your tail blades are rotating in the correct direction and that they are installed correctly. It is hard to belive how often that Walkera screws that up!

I'll check back to see if you have more questions.

Huey




W37 Cepeda -> RE: WALKERA 37 (1/2/2008 3:00:07 PM)

I'm back too.

And good news... have tons of walkera parts!

going to open a on small online store.


W 37




quote:

ORIGINAL: babyhuey

Sorry guys, I thought that this thread had died.

Did you try reversing your gyro? It sounds like that might be the problem.
If you have control of the Helis direction (forward-back, left-right) then those servos are hooked up correctly. Channel three is the esc, four is always rudder, five is the gear channel, six is the pitch, and seven is gyro adjust if you have that feature.
Check that your tail blades are rotating in the correct direction and that they are installed correctly. It is hard to belive how often that Walkera screws that up!

I'll check back to see if you have more questions.

Huey





babyhuey -> RE: WALKERA 37 (1/2/2008 6:55:11 PM)

Cool Cepeda,
It's amazing how the parts start adding up. I already have built an entire RTF 36 from spare parts and now I just figured out that I have enough extra parts to almost build a Raptor G2 ARF.
Just need a Trex xl belt and an esc to finish it.[:D]
Post a link to your store when you get it ready.
Looking forward to it.
Huey




W37 Cepeda -> RE: WALKERA 37 (1/3/2008 9:34:19 PM)

SCALE COMPARISON

Imagine this. This is what we all should aspire to achieve!

W 37




W37 Cepeda -> RE: WALKERA 37 (1/3/2008 9:47:39 PM)

OK.. Which is the best battery?

This is the question of the new year. Everyone has many opinions.

No one has a definte answer, cause many batteries are used in different ways.

But, if you are a casual flyer, maybe doing some 3D, barrel rolls, 360 loops, not pushing it at all

I recommend FLIGHT POWER EVO 2500Mah 11.1V Lipo. Along with the ULtra Balancer (blinky clone but better) if your not using a balance charger.

This battery does not puff up and has an excellent warrantee. EVEN WITH CRASHES! Don't waste money on anything else. And remember to

use caution when handling LIPOS. Do not over discharge and do not over charge.

Flight time on the Walkera DF60 = 18 minutes. DF37=17 minutes. Df36=16.5 minutes.. All normall fly mode, Idle 0.




W37 Cepeda -> RE: WALKERA 37 (1/3/2008 9:57:44 PM)

OK.. Should I build a hybrid?

Absolutly. Hybrids offers more expansion than conventionals. Many more options too without hitting the pocket.

Here is example of my 450 hybrid. This unit flies better than an original 450XL. It's lighter and the body is stronger.




babyhuey -> RE: WALKERA 37 (1/4/2008 1:36:22 AM)

You are so right about the 600, My dream Heli. I figured out that if I sell every thing I own in this hobby I could get one but I'm not ready yet.
On your hybrid, What did you use to make it? It looks awsome!
Huey




captgww -> RE: WALKERA 37 (1/4/2008 2:51:12 AM)

Thanks for the information, I'll try to review all the settings and cabling when the temp gets over 10 degrees.




W37 Cepeda -> RE: WALKERA 37 (1/11/2008 2:46:15 AM)

HYBRID 450

Video and small review.

http://www.youtube.com/watch?v=3zun1DQ4uZ0




W37 Cepeda -> RE: WALKERA 37 (1/26/2008 12:07:19 AM)

Bump.




hammerhead2825 -> RE: WALKERA 37 (1/26/2008 10:30:22 PM)

hey guys; i need to reverse a 380SD motor. do i switch leads and turn the diode around? i don't want to fry anything (again). lol




babyhuey -> RE: WALKERA 37 (1/27/2008 2:13:12 AM)

That's the correct way to do it. What are you doing with it?




babyhuey -> RE: WALKERA 37 (1/28/2008 2:36:41 AM)

test




salat -> RE: WALKERA 37 (2/4/2008 10:33:03 AM)

Hello!
One guy offers me metal 37 frame + incomplete plastic 37 for parts for 100 shipped. Is it good price?
Thank you,
Kostya




babyhuey -> RE: WALKERA 37 (2/4/2008 1:54:46 PM)

Didn't know that they made a metal frame for the 37. Maybe it's for the Trex?




salat -> RE: WALKERA 37 (2/4/2008 5:02:06 PM)

I meant regular frame with all metal head and tail.
K




babyhuey -> RE: WALKERA 37 (2/4/2008 10:11:55 PM)

Is one of them complete? Then it's a good deal. By the way I have tried both and prefer the plastic 37 head as the alloy one is a completely different design and is poorly made.




salat -> RE: WALKERA 37 (2/4/2008 10:18:16 PM)

Metal one was complete. I rejected offer and he is going to sell it on ebay.
K.




babyhuey -> RE: WALKERA 37 (2/5/2008 1:36:15 AM)

That's to bad as it seems like a good deal. Speaking of good deals there is a 50 shuttle RTF on ebay for $400 that is complete with Futaba 8 channel radio system and motor and gy401 gyro/digital servos!
Man I wish That I had the cash!




ausaero -> RE: WALKERA 37 (3/3/2008 3:08:39 AM)

W37,

Need your help mate. I have not been flying my W60 (Alum Head - I understand it has the same setting as the W37) for about 3 months. Took it out the other day and have noticed
that the front servo tends to travel farther that the cyclic servos when I hit collective. I have switched servos, changed the receiver but to no avail.

Because of the imbalance (front servo travelling farther that the other two servos), the heli tends to move forward even though all
i want it to do is hover. My question is, has anyone ever encountered this before? Could it be that my tx is busted? Or is there something that i can still do to fix the problem.

Any help will be much appreciated.

Cheers
Ausaero




babyhuey -> RE: WALKERA 37 (3/3/2008 4:05:04 AM)

You might be able to move the front servo link up the arm, closer to the servo to shorten it's throw. Assuming that they all start at the same level in the first place.




ausaero -> RE: WALKERA 37 (3/5/2008 2:27:55 AM)

Thanks Baby Huey. It worked! Managed to fix her last night per your suggestion. I wonder why i didnt think of that. Been struggling for the past 2 weeks trying to figure out what the problem was.

I'm hoping to fly her later after work. Weather has been perfect lately here in Brisbane, Australia.

Cheers

ausaero





babyhuey -> RE: WALKERA 37 (3/5/2008 3:32:35 AM)

Glad to help,
One of my life long dreams is to come and see your country someday (by the way of Hawaii of course!) If I could I would take a tour of that part of the world by ship.
Just need the correct lotto ticket and I'm on my way.[:D]




Page: <<   < prev  46 47 48 49 50 51 52 53 54 [55]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.3430176