|
UKgroucho -> RE: Choosing Servos for the T-Rex (3/11/2006 3:11:48 AM)
|
I've been using a 7CHP for the last 18 months or so as I've gone thru the RC learning curve... it has done everything I've needed. I started using it with a FP (AeroHawk moded with brushless, LiPo and GY401) and has taken me thru into Trexes (three of - 3S, 4S and 5S) .. driving my simulator (Reflex) and ... maybe tomorrow, my first plane - an AeroCat foamie equipped with heli leftover electronics that is ready to maiden. I think the digital spectrum stuff is very very interesting... but not enough to sacifice having capable TX . My view is that teh 7CHP is a very (very) good buy right now. Buy it with a view to replacing it in 2 or 3 years - or making it your 'number 2 TX'. In 2 or 3 years the digital stuff will be sorted out, great TXs with good functionality will be reasonably priced, the bugs will be driven out. Back to the servos. HS56 for cyclic, GY401 and 9650 for the tail. I've tried a bunch of different stuff and the 56s are very good (buy spare gearsets though... no different to any other plastic geared servo, they do get stripped) and the 9650 is the 'daddy' for the tail if you have a GY401. It IS a little large and heavy... but you set it up and forget it - and it WORKS.
|
|
|
|