BEST FOAMY FREE PLAN (Full Version)

All Forums >> [Electric Aircraft Universe] >> 3D Electric Flying!



Message

marshman -> BEST FOAMY FREE PLAN (4/23/2006 8:01 PM)

Just killed me Shock Flyer and am planning to build a new one from plans on the internet. I've been looking at the foamy factory plans. I cant make up my mind between the mini 3dx and Echelon Bipe. i was wondering if anybody has had any experiance with either of these planes.

Cheers



wot 4 -> RE: BEST FOAMY FREE PLAN (4/23/2006 8:39 PM)

I've built both and if you want something that flys similar to your shocky,go for the mini 3dx- I used a 2208/34 and 2cell setup-with a 10x4.7 this will fly outdoors in calm conditions- hover well easy and can do all the usual 3d stuff- the bipe is also good but because of the wingloading is'nt as nice as the 3dx-saying that,if you keep it light it will do the business-blenders and torque rolls especially good!!!!- You can use a 3cell setup on the 3dx but you will have to watch out for tail twist-use 3mm depron throughout and whats left of your shocky(carbon rods,linkages,etc.



Chris-_-Memphis -> RE: BEST FOAMY FREE PLAN (4/23/2006 8:40 PM)

3dx out of FFF if your flying outdoors



Av8er Tim -> RE: BEST FOAMY FREE PLAN (4/23/2006 11:01 PM)

Go with the Mini 3DX. Echelon plans are still beta and I haven't had time to sort a few things out on it. The mini 3DX rocks and is still one of my all time favorites...

Tim H.



marshman -> RE: BEST FOAMY FREE PLAN (4/23/2006 11:56 PM)

looks like ill go with the mini 3dx then, how would you guys say it compares to the extra shock flyer.
I only fly outside and was using a 3 cell 850 mah and a 1100 mah li po pack will this work??



mountaindr3wz -> RE: BEST FOAMY FREE PLAN (4/24/2006 2:44 AM)

where are the plans for the mini 3dx?



Maudib -> RE: BEST FOAMY FREE PLAN (4/24/2006 3:44 AM)

Get it here:

http://www.foamyfactory.com/plans/mini-3dx-plans.zip




JWilliams -> RE: BEST FOAMY FREE PLAN (4/25/2006 9:13 PM)

I have my free foamy plans here and I think you will find them very easy to build and among the best flying. I offer the Cap, Yak54, Extra 330 and Edge 540 for free download.
Jeff W.



Foamaholic -> RE: BEST FOAMY FREE PLAN (4/28/2006 8:38 PM)

I made the Mini 3DX out of blue fanfold foam and it's very durable. It flies very good and is very easy to hover. I use a CustomCDR double and 3 cell 740 lipo.



JWilliams -> RE: BEST FOAMY FREE PLAN (4/29/2006 5:26 PM)

If anybody can tell me how to post a dwg file on here I will be happy to post my foamy plans.
Jeff



Gus155 -> RE: BEST FOAMY FREE PLAN (4/30/2006 12:24 PM)

Jeff, look for a program on tucows.com called pdf995. you can print your .dwg files as pdf files.



JWilliams -> RE: BEST FOAMY FREE PLAN (4/30/2006 5:33 PM)

Gus155, I can print the files, I was wondering how to post them here so anyone could download them right from here. When I go to the upload section it only takes .gif, .jpg, .tif etc picture type files.
Jeff



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

RC Universe is a service of Internet Brands, Inc. Copyright © 2001-2013.
0.15625