RE: kyosho inferno gt ready sey

RE: kyosho inferno gt ready sey
View related threads: (in this forum | in all forums)

Logged in as Guest

Users viewing this topic: Bluebrew

Printable Version

AXIAL AX10 SCORPION CRAWLER 12MM HEX WHEEL EXTENSIONS - RTR
Seller: wheelextensions
Details: $20.00 | 8/25/2008 | Classified Ad
We will rotate YOUR AD in this spot if you select "Forum Featured" when placing or editing your ad!

All Forums >> RC Cars, Buggies, Trucks, Tanks and more >> RC On Road Nitro Cars >> RE: kyosho inferno gt ready sey

Page: << < prev 16 17 18 19 20 21 22 [23] 24 25 next > >>

Login

Message

<< Older Topic Newer Topic >>

RE: kyosho inferno gt ready sey - 6/7/2008 2:09:07 PM

jspeed

Posts: 75
Joined: 12/21/2006
From: Tampa, FL, USA
Status: offline

Homestead International's R/C Speedway!

(in reply to jspeed)

Post #: 551

RE: kyosho inferno gt ready sey - 6/7/2008 2:23:28 PM

jspeed

Posts: 75
Joined: 12/21/2006
From: Tampa, FL, USA
Status: offline

Nice Covered Pit Area in the shade, real bathrooms at Homestead Miami International Speedway!

(in reply to jspeed)

Post #: 552

RE: kyosho inferno gt ready sey - 6/9/2008 10:28:12 PM

Harvz

Posts: 202
Joined: 1/5/2007
From: Miami, FL, USA
Status: offline

Jspeed, where do you buy your Ipanema tires? I'll definitely going to get that tire if it really last a gallon of fuel.

(in reply to jspeed)

Post #: 553

RE: kyosho inferno gt ready sey - 6/9/2008 10:32:31 PM

Harvz

Posts: 202
Joined: 1/5/2007
From: Miami, FL, USA
Status: offline

How do you adjust rear toe of IGT?

Can someone pls give me a link where I can buy the clear Ferrari body.

(in reply to Harvz)

Post #: 554

RE: kyosho inferno gt ready sey - 6/10/2008 12:20:19 PM

jspeed

Posts: 75
Joined: 12/21/2006
From: Tampa, FL, USA
Status: offline

quote:

ORIGINAL: Harvz

How do you adjust rear toe of IGT?

Can someone pls give me a link where I can buy the clear Ferrari body.

To adjust rear toe you need to get the Kyosho parts tree #IF-124B, it har different rear toe blocks and front upper & lower pin holders. They help dial in the car to your driving style a lot.

The clear Ferrari body is a hard to find item. I think I heard that Winner's Circle had some. try calling Lee at 1815 Vintage Drive, Snellville, GA 30078 Phone: (866)-648-7672 or http://gasrccar.com/eshop/

< Message edited by jspeed -- 6/10/2008 12:36:27 PM >

(in reply to Harvz)

Post #: 555

RE: kyosho inferno gt ready sey - 6/10/2008 12:32:37 PM

jspeed

Posts: 75
Joined: 12/21/2006
From: Tampa, FL, USA
Status: offline

quote:

ORIGINAL: Harvz

Jspeed, where do you buy your Ipanema tires? I'll definitely going to get that tire if it really last a gallon of fuel.

I've been getting serious traction & run time out of the Ipanema/Sintec 45 shore belted radial slicks down here in the Florida heat. Last race I used them I ran (2) 5min warmups, qualify and 15min main at Port Charlotte's track and they're just scuffed in & ready for the Race at Fort Myers in two weeks. If you race in Florida, the 45 shore is the ticket, you can also use the 40shore on the rear of the car for a little more traction out back.

Anyone racing the IGT in colder climates can go with their 40 & 35 shore slicks.

Check out these dealers on the Ipanema Racing website.

http://ipanemaracing.webs.com/ipanemaracingdealers.htm

Bruckner Hobbies 3357 East Tremount Ave. Bronx NY 10465 Phone: (718) 863-3434

Leisure Hours Hobbies 2712 Plainfield Road, Joliet, Illinois 60433 Phone: (815) 439-1477

Winner's Circle 1815 Vintage Drive, Snellville, GA 30078 Phone: (866)-648-7672

Ipanema Racing is looking for a good dealers in the Miami area & accross America too.

< Message edited by jspeed -- 6/10/2008 12:35:14 PM >

(in reply to Harvz)

Post #: 556

RE: kyosho inferno gt ready sey - 6/15/2008 7:33:40 PM

jspeed

Posts: 75
Joined: 12/21/2006
From: Tampa, FL, USA
Status: offline

Well, ran the Kyosho Inferno GT at the Homestead Miami Speedway R/C track and WOW…What a Blast! The track’s layout is flowing and fast. It really is a lot of fun with the IGT.

The factory 15/19 clutch bell gearing worked well around the track, especially in the infield and chicane areas. The long straight in front of the driver’s stand lets you get the car up to impressive speed, but you’ll have to lift off the throttle to enter the sweeper because the wall will be waiting, lol.

The Ipanema Racing slicks were awesome all day. I ran the 40 shore front tires & the 35 shore out back until mid-day. Went thru ½ a gallon on a new set and they’re looking ready for the next race at Fort Myers.

Anyone with an IGT in the greater Miami metro area should seriously consider checking out the track at Homestead. It’s a lot more fun racing on this track than you can imagine!

Check it out, it's in the fast lane.

http://www.homesteadrcraceway.com

(in reply to jspeed)

Post #: 557

RE: kyosho inferno gt ready sey - 6/17/2008 6:35:33 AM

joizeex

Posts: 225
Joined: 11/27/2006
From: Maple Shade, NJ, USA
Status: offline

all this talk about tracks is pushing me to fulfill my earlier desire to get some mini cones and setup temporary courses in parking lots where i run with friends - ala RC autocross haha.

i finally sorted out my understeer issue by reducing front camber to near 0 (in addition to the previously mentioned plastic blocks). now it responds really well with those sway bars when i perform "slalom" maneuvers and turns-in nicely and has nice corner exit steering. it still plows a bit midcorner under acceleration, but depending on how abrupt throttle input is, i can kick the back out in mid-corner as well. it also has some snap oversteer on bumpy corners under acceleration, but that's fine for now.

_____________________________

Kyosho: FW05-T WRC Evo6, TR-15 StadiumForce, InfernoGT WRC Sti, Seawind; Heli: HoneyBeeKing, Evo50, 4#3B; 1:1 Mitsubishi Evo

(in reply to jspeed)

Post #: 558

RE: kyosho inferno gt ready sey - 6/18/2008 1:22:34 AM

Harvz

Posts: 202
Joined: 1/5/2007
From: Miami, FL, USA
Status: offline

My friend is trying to convert his Inferno 7.5 buggy in to GT. All he needs now is the 2 speed tranny, the problem is we have no luck seaching it online, even the part
number of it. We are looking for the one set 2 speed tranny of the Inferno GT not the separate pieces.
Does anybody know the part number of it and where to buy it.

(in reply to joizeex)

Post #: 559

RE: kyosho inferno gt ready sey - 6/18/2008 2:23:23 AM

MiamizFinest

Posts: 4382
Joined: 6/20/2006
From: MIAMI, FL, USA
Status: offline

Call micro macro mundo in kendall, i dunno the part number but i bet they have it since they are a huge kyosho dealer

_____________________________

-= THE WORLD IS YOURS =-

(in reply to Harvz)

Post #: 560

RE: kyosho inferno gt ready sey - 6/18/2008 7:22:35 PM

maoy

Posts: 250
Joined: 7/24/2007
From: long beach, CA, USA
Status: offline

Hey everybody,

Got a question for you guys, has anybody else figure out a way to solve the 2 speed wear. I know we got a couple but I don't want to perform all kind of cutting on the shaft or drill out my chassis.

Also, I am trying to sell a BRAND NEW Mach 427 engine without spinstart backplate. $120 shipped. PM me if anyone is interested (paypal only). I will post pics as soon as possible.

(in reply to MiamizFinest)

Post #: 561

RE: kyosho inferno gt ready sey - 6/19/2008 12:01:07 AM

MiamizFinest

Posts: 4382
Joined: 6/20/2006
From: MIAMI, FL, USA
Status: offline

quote:

ORIGINAL: maoy

Hey everybody,

Got a question for you guys, has anybody else figure out a way to solve the 2 speed wear. I know we got a couple but I don't want to perform all kind of cutting on the shaft or drill out my chassis.

Also, I am trying to sell a BRAND NEW Mach 427 engine without spinstart backplate. $120 shipped. PM me if anyone is interested (paypal only). I will post pics as soon as possible.

Just rip the bushing in the second gear out and isntall a bearing its bein posted a few times on this thread

also the 427 is a good motor but 120 might be to much, ive bought a 427 on ebay with the pipe, for 100 bucks on fleabay

_____________________________

-= THE WORLD IS YOURS =-

(in reply to maoy)

Post #: 562

RE: kyosho inferno gt ready sey - 6/19/2008 1:03:33 AM

maoy

Posts: 250
Joined: 7/24/2007
From: long beach, CA, USA
Status: offline

Miami, thanks but I already tried using bearings. I think it was size 5x10x4mm or something. Did not work, my engine rip that 2nd gear in 3 runs!!! I seriously mean 3 runs.

Wow!!! $100 for a mach 427 engine combo. Damn, you are lucky. I wished I got that deal. Well, I will wait and see.

(in reply to MiamizFinest)

Post #: 563

RE: kyosho inferno gt ready sey - 6/19/2008 2:14:22 AM

MiamizFinest

Posts: 4382
Joined: 6/20/2006
From: MIAMI, FL, USA
Status: offline

quote:

ORIGINAL: maoy

Miami, thanks but I already tried using bearings. I think it was size 5x10x4mm or something. Did not work, my engine rip that 2nd gear in 3 runs!!! I seriously mean 3 runs.

Wow!!! $100 for a mach 427 engine combo. Damn, you are lucky. I wished I got that deal. Well, I will wait and see.

if you blew it in 3 runs then u meshed it wrong OR your useing the wrong gearing combo on ur clutch bell, becuase before i figure out the hole single speed thing i ran a RB modded picco 28 with the HPI pinions for a while and my second gear use to last me between 1 and 2 gallons of fuel, and this was useing the bushing not the bearing the bushing is a crappy desine but with it replaced with a bearing the spur gear can last GALLON'S and GALLON'S of fuel

did you flip the car??? alot of people dont know u shoudl always check the mesh of you car in a flip over on ashphalt since the motor hiting the street is a HUGE jolt and straighn on the motor jsut thought id share that little info

i saw a few days a go a awsome mod on that kyosho forum ill try looking for it a guy used the tranny spur gear from a savage in the place of the second gear on the inferno gt ima look for the link.......

_____________________________

-= THE WORLD IS YOURS =-

(in reply to maoy)

Post #: 564

RE: kyosho inferno gt ready sey - 6/19/2008 2:25:39 AM

MiamizFinest

Posts: 4382
Joined: 6/20/2006
From: MIAMI, FL, USA
Status: offline

Well guys here check it out since RCU alwalys deletes links to other forums im gonig to post all the info the user from the inferno gt posted

THIS IS NOT MY 2SPEED MOD THE GUY THAT MADE THIS MOD IS ON THE INFERNO GT FORUM HIS NAME IS THUNDER9000

quote:

I was recently converting my