5955 servo dimension please

5955 servo dimension please (Full Version)

All Forums >> [Radios, Batteries, Clubhouse and more] >> RC Radios, Transmitters, Receivers, Servos, gyros >> Radio Manufacturer Direct Support >> Hitec/MultiPlex Radios- Ask Hitec Customer Service

Message

ibow24 -> 5955 servo dimension please (6/4/2006 12:43:41 AM)
Hello, Could someone please give me the dimension from the center of the output shaft to the edge of the case for 5955 servo. I'm building a Carden Cuda and I don't have the servos in hand yet. I have all the other dimensions from the spec sheet but I need this dimension for proper placement of the servo bays. thanks in advance Steve

mglavin -> RE: 5955 servo dimension please (6/6/2006 1:59:54 PM)
Approximately 5/16" from the output shaft to the side of the case.

Page: [1]

0.078125