AEROWORKS... ULTIMATE..????

AEROWORKS... ULTIMATE..????
View related threads: (in this forum | in all forums)

Logged in as Guest

Users viewing this topic: none

Printable Version

All Forums >> RC Airplanes >> Giant Scale Aircraft - 3D & Aerobatic >> Aero-Works Support >> AEROWORKS... ULTIMATE..????

Page: [1]

Login

Message

<< Older Topic Newer Topic >>

AEROWORKS... ULTIMATE..???? - 6/4/2006 10:43:20 PM

Posts: 65
Joined: 11/3/2005
From: schertz, TX, USA
Status: offline

Will AEROWORKS ever build another ULTIMATE???

RE: AEROWORKS... ULTIMATE..???? - 6/6/2006 3:07:44 AM

Posts: 1396
Joined: 2/24/2004
From: Parker, CO, USA
Status: offline

At the moment we are unsure there are still a lot of other planes to come down the pipe but I hope that some day we will be able to do one as a QB.

_____________________________

Team Aeroworks
Thank You: Aeroworks, Desert Aircraft, and Smart-Fly

(in reply to mikec3d)

RE: AEROWORKS... ULTIMATE..???? - 6/6/2006 4:44:23 AM

Posts: 65
Joined: 11/3/2005
From: schertz, TX, USA
Status: offline

I hope you do, it will definately make it's way to my hanger. The old one is about worn out, and maybe it's about time to move up a size or two.looking really hard at the H9,but it's a little pricey, although if you were to make a 150cc size QB, it's the one I would buy. Here's to future luck.......

(in reply to Mark Dennis)

RE: AEROWORKS... ULTIMATE..???? - 8/15/2006 5:24:11 AM

caleb

Posts: 55
Joined: 2/17/2002
From: Huntsville, AL, USA
Status: offline

Hi,
So what happened to Aero-works ultimate's? There is none on the website...

Did World Models pick up the ultimate? It looks like they sell the same planes aeroworks had?

Are there any good kits of ultimates? I would like to build one maybe...

thanks

< Message edited by caleb -- 8/15/2006 5:25:01 AM >

(in reply to mikec3d)

RE: AEROWORKS... ULTIMATE..???? - 8/17/2006 3:47:11 AM

Posts: 1396
Joined: 2/24/2004
From: Parker, CO, USA
Status: offline

The world models ultimates are copys of our old design. As far as I know there are no kits in the 50cc+ size for an ultimate.

_____________________________

Team Aeroworks
Thank You: Aeroworks, Desert Aircraft, and Smart-Fly

(in reply to caleb)

RE: AEROWORKS... ULTIMATE..???? - 8/21/2006 2:40:06 PM

Posts: 81
Joined: 6/9/2006
From: PORTO, PORTUGAL
Status: offline

Dear MIKEC3D.

About this question ( AEROWORKS MODELS) the planes was made by WORLD MODELS until last year... after some problems WORLD MODELS cancel the relashionsip with AEROWORKS and now the ultimates and the katana are available directly from WORLD MODELS.
That models are not a copy!!!!! We should not say that WORLD MODELS planes are the same of AEROWORKS but we should say that AEROWORKS are the same of WORLD MODELS...

This models are great... The 42% ULTIMATE wins the TOC so what can i say... i have one .... and fly like a bird

Thanks

JM

(in reply to Mark Dennis)

RE: AEROWORKS... ULTIMATE..???? - 8/21/2006 5:08:53 PM

Posts: 62
Joined: 1/11/2003
From: Chula Vista, CA, USA
Status: offline

I just got a 33% Ultimate from www.chiefaircraft.com who also sells the 27% Ultimate (look under World Modles planes) which I also have from them. Both are recent. You can also get them from www.airborne-models.com. I believe that Aeroworks was a distributer for these planes from World Modles.

(in reply to J-PORTUGAL)

RE: AEROWORKS... ULTIMATE..???? - 8/21/2006 10:54:16 PM

Posts: 1396
Joined: 2/24/2004
From: Parker, CO, USA
Status: offline

To clear a few things up these planes both the katana and ultimate were our designs and were manufactured by world models. These models are direct copys of ours and the only difference may be the scheme. As far as the toc winning 42% Ultimate that was designed and built here as one of the prototypes and then the smaller models came after it. Please get your facts straight before coming on here and posting.

_____________________________

Team Aeroworks
Thank You: Aeroworks, Desert Aircraft, and Smart-Fly

(in reply to 76Phantom)

RE: AEROWORKS... ULTIMATE..???? - 10/10/2006 12:26:26 AM

Posts: 111
Joined: 4/5/2003
From: Winthrop Harbor, IL, USA
Status: offline

I know it's a bit late but I just finished mine from aeroworks.
I installed a pull-pull elevator, rudder and throttle and was happy to come in at 24 lb 4 oz. w/ DA-100
Maidend it last Saturday and was very pleased.
Looking forward to the next shipment of 50cc yaks.

Keith S.
Far northern IL

I should add that the carbon landing gear spinner and tail gear helped also.
What would be a good 3 blade for my DA-100? There is a bit of complaints starting about with my 28-10.

< Message edited by mrdakota -- 10/10/2006 12:29:41 AM >

_____________________________

I''m having so much fun...Maybe I should wear a helmet!

(in reply to Mark Dennis)

RE: AEROWORKS... ULTIMATE..???? - 10/10/2006 4:12:40 AM

Posts: 701
Joined: 3/11/2005
From: Vicksburg, MS, USA
Status: offline

Keith, see above on QB 260 post about the 3 blade Biela 26 x 10. Don't go up on pitch but leave it at 10, going down two inches is okay. I had great luck with mine.

Bobby

(in reply to mrdakota)

RE: AEROWORKS... ULTIMATE..???? - 10/28/2006 2:05:14 AM

Posts: 259
Joined: 11/24/2005
From: Mt. Holly, NC, USA
Status: offline

AEROWORKS ROCKS !!!!!!!!!!!!!!!!!!! Who else has won 4 of 5 TOC competitions, they are not a COPY of anything but their own design. Top quality everything, ULTRACOTE not cheap chinacote that flys loose after two flights. We need to get the facts straight before we start badmouthing a product.

(in reply to Bobby Folsom)

RE: AEROWORKS... ULTIMATE..???? - 8/1/2008 4:44:11 AM

rserna

Posts: 11
Joined: 12/15/2003
From: Laredo, TX, USA
Status: offline

Hi does anyone has the manual of the Ultimate 33% Aeroworks.

Regards

Rolando

(in reply to gregman50)

RE: AEROWORKS... ULTIMATE..???? - 8/3/2008 1:28:59 AM

Dale W

Posts: 30
Joined: 1/2/2002
From: Hodges, SC, USA
Status: offline

I'm saving my pennies and patiently waiting for the 20-300 that will hoefully come out this fall. I've done a few 50cc Ultimates and now want to make the jump to a bigger Ulitimate -like 150cc! Hopefully the prototypes are passing the mustard (Hot Dawg!).

Dale

(in reply to mikec3d)

RE: AEROWORKS... ULTIMATE..???? - 9/8/2008 1:20:52 PM

RENO1

Posts: 8
Joined: 5/20/2005
From: BOYNTON BCH, FL, USA
Status: offline

Does anyone know what covering was used on the 42% and what the colors were. I am looking for the pink to repair my I strut that lost about half it's covering this week end.

thanks

Mike

(in reply to Dale W)

RE: AEROWORKS... ULTIMATE..???? - 9/10/2008 5:21:54 PM

Posts: 58
Joined: 6/17/2006
From: BLAINE, WA, USA
Status: offline

quote:

ORIGINAL: Mark Dennis

The world models ultimates are copys of our old design. As far as I know there are no kits in the 50cc+ size for an ultimate.

There are Ultimate kits available Laser cut from Precision Cut Kits they bought the rigts from Procraft which eas formerly Ohio RC these are beautiful kits 500CC 64" wingspan and 100CC 77" wingspan I have both and they fly great!
http://www.precisioncutkits.com/201.htm 50CC
http://www.precisioncutkits.com/301.htm 100CC

< Message edited by ultimate1 -- 9/10/2008 5:23:40 PM >

(in reply to Mark Dennis)

RE: AEROWORKS... ULTIMATE..???? - 9/17/2008 4:16:26 PM

Posts: 298
Joined: 2/9/2006
From: savannah, GA, USA
Status: offline

if they build one could we plse get one color scheme like the Blue Hawk version

(in reply to ultimate1)

Page: [1]

All Forums >> RC Airplanes >> Giant Scale Aircraft - 3D & Aerobatic >> Aero-Works Support >> AEROWORKS... ULTIMATE..????
Page: [1]

Jump to: