Pin & Flag Switches... (Full Version)

All Forums >> [Radios, Batteries, Clubhouse and more] >> RC Radios, Transmitters, Receivers, Servos, gyros >> Radio Manufacturer Direct Support >> Smart-Fly (Quest Engineering) Support Forum

Message

---

Torqued-Up -> Pin & Flag Switches... (6/5/2006 4:23:55 PM) I finishing assembly of a plane which uses one of your turbo regulators & power expanders... When I ordered the combo, I opted for the pin & flag switch for the unit... I now want to use the same type of switch w/regulator for my ignition... I cannot find the pin & flag switches on your website anymore... Are they still available??? If so, what configuration so I need for the regulator & switch for ignition... Thanks

---

rrritchey -> RE: Pin & Flag Switches... (6/5/2006 5:21:34 PM) Hi Torqued-up, The Pin & Flag switchs only work with our regulators that have a failsafe mode. They will not work as stand-along switches. For your ignition you would need to order our standard Regulator w/Failsafe to use the Pin & Flag switch. Please let me know if I did not answer everything or if you have another question.

---

Page: [1] 1

SITE MAP!   : :   FORUM RULES © 2001 - 2007 24-7 RC, LLC, all rights reserved.

0.125