|
Steve Campbell -> Extra 330S kit... (6/8/2006 2:05:35 PM)
|
As I ponder my next model, the less and less I want to have just another cookie-cutter ARF aerobat. By this, I mean the same trim scheme as a thousand other ones. For several reasons, I'm limited to a 30% model; and there is a distinct lack of actual kits for this size model.
The Aero-Tech Extra 330S is the most intersting one that my limited research has turned up. The web site info is a bit sparse, so I would appreciate any insight from those who have built and flown this one.
From what I have been able to gather, this airplane has a basic built-up box (formers, stringers, & planks) fuselage, with foam turtle deck, etc., and foam wings that one must sheet. Correct?
Are the tail surfaces foam or built-up? Airfoiled?
I will be using a BME 50 with a canister muffler. Is the fuselage designed for a canister installation?
Answers to these questions, and any other observations, would be greatly appreciated.
|
|
|
|
