trex w/ blade cp tx  
View related threads: (in this forum | in all forums)

Tower Hobbies
Enter up to 4 keywords or Tower stock numbers
Logged in as Guest



Users viewing this topic: none
  Printable Version
       

All Forums >> RC Helicopters >> Electric RC Helis >> T-Rex heli >> trex w/ blade cp tx
Page: [1]

Login
Message << Older Topic   Newer Topic >>
trex w/ blade cp tx - 7/7/2006 8:01:31 AM   
alt25s


 

Posts: 5
Joined: 10/27/2005
From: suisun city, CA, USA
Status: offline 		will a blade cp tx with a futuba rx(since they are both neg shift) work on trex since the cp tx has the ccpm mixxing built into the radio? and if it does work, which trex model will it work with??
       Post #: 1

RE: trex w/ blade cp tx - 7/7/2006 9:17:14 AM   
AJsToyz



Posts: 791
Joined: 2/13/2006
From: Maybee, MI, USA
Status: offline 		I know the Blade is eCCPM so you might look at a 450XL CDE and see if its the same as far as the swash plate goes. The Blade use a mixer board for the electric tail motor and has a built in Gyro. So these are more things to check into.

< Message edited by AJsToyz -- 7/7/2006 9:19:07 AM >

_____________________________

I go out , I crash , I fix .....
Club Saito member #590

(in reply to alt25s)
       Post #: 2

RE: trex w/ blade cp tx - 7/13/2006 2:10:56 PM   
WhtBronco



Posts: 2084
Joined: 10/3/2002
From: Winchester, VA, USA
Status: offline 		The CCPM settings on the Blade CP Tx are not adjustable IIRC so it won't work. In fact there are several other settings that need to be adjusted that you wouldn't be able to such as the gyro, servo travel etc. You need a real computer radio to setup a CCPM heli. Do yourself a favor and get atleast a JR6102 or a Futaba 7CHP . The results on the Trex will be worth it.

_____________________________

Chris
Wish I was flyin'!

(in reply to AJsToyz)
       Post #: 3

RE: trex w/ blade cp tx - 7/15/2006 3:50:35 PM   
HighSierra



Posts: 572
Joined: 1/7/2002
From: Nor Cal, CA, USA
Status: offline 		simply put, it won't work.... The mixing for ccpm is done in that little 4 in 1 unit and not in the TX, and even if you could use the 4 in 1 with the trex (which is impossible) it would be crap as there is no adjustibility to throtle and pitch curves (I believe the Blade CP just uses linear throtle and pitch (0 25 50 75 100)

_____________________________

active in the hanger: TT Rare Bear (YS140), H9 Funtana (saito 180), DP Ultimate (YS 63), Trex SE V2 (Align 430LF)

(in reply to WhtBronco)
       Post #: 4

RE: trex w/ blade cp tx - 7/16/2006 5:38:24 AM   
mantis*tw*


 

Posts: 125
Joined: 10/18/2005
From: pasco, WA, USA
Status: offline 		why would you buy a nice t rex and then fly it with a cheap glitchy radio?

(in reply to HighSierra)
       Post #: 5

RE: trex w/ blade cp tx - 7/16/2006 6:29:04 AM   
hdoc


 

Posts: 428
Joined: 11/28/2005
From: Roslyn, NY, USA
Status: offline 		As has been suggested--Don't even think about it.

You need a good (Not necessarily very expensive) programmable Heli Xmitter.

Lloyd

(in reply to mantis*tw*)
       Post #: 6

Page:   [1]
All Forums >> RC Helicopters >> Electric RC Helis >> T-Rex heli >> trex w/ blade cp tx
Page: [1]





Jump to:


Google 



Search | Marketplace | Event Calendar | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Member Video Posts | RCU Video Gallery | Instructor Search | Field|Track|Marina Search

Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

Charities we support that also need your help
Yorkie Rescue | Humane Society | ASPCA | Crohn's-Colitis America

Kaango.com Classifieds

0.282RCU5