|
westrone -> Lipo Battery connector Help! (7/13/2006 2:29:01 AM)
|
I have acouple of Lipo batteries that I got in a deal with a Walkera 36 Helicopter.
After learning to hover on the dismal stock battery I decided to move up to one of the Lipo packs and discovered that the charger still had the pin from one of the packs stuck (welded) in the connector. I shortly figgured out the charger was toasted but the packs test out good so I am in need of the connectors.
These are the small red 2 pin type and all I have found on-line is a connector with a 3 inch 24 gage wire pigtail which would seem to be too small for the current draw.
Does anyone out there have a source for the bodies and pins for these connectors?
I have crimpers that will do these size pins.
Thanks,
"Big Stiks as supposed to touch a wingtip when they roll, Aren't they!?"
|
|
|
|
