35% Extra 300 Mid-Wing

35% Extra 300 Mid-Wing (Full Version)

All Forums >> [RC Airplanes] >> Giant Scale Aircraft - 3D & Aerobatic >> JTEC / RADIOWAVE Support

Message

F1race79 -> 35% Extra 300 Mid-Wing (7/27/2006 4:15:41 PM)
Are any of these flying, or they too new to be out? I have a BME 110 with stock mufflers and would like to one of these in Sportsman IMAC, would balance be a problem? I know everyone says, if you plan for it it will balance, horse feathers!!!!!! The last Extra it was in, I put carbon tail tubes ran NIMH on the firewall for ignition, and still had to add nose wieght. Just asking an honest opinion. Thanks for any info,

jtec radiowave kid -> RE: 35% Extra 300 Mid-Wing (7/27/2006 4:53:02 PM)
Julius, As of right now the prototype 35% extra 300 is the only one in existance. The 35% 300 would be a great airplane for any IMAC class and will do 3D with the best of them. We have had a bunch of TOC and Masters pilots fly the 300 and all of them are raving how well it flies so I think we have a winner. As for the balance with a BME 110 I think you would be ok because right now in the prototype with a DA 100 we have the batteries and rudder servos at the very rear of the hatch, if you were to move them up one bay I think it will balance with the 110. If anything it will be a minimal amount of weight. Kevin

F1race79 -> RE: 35% Extra 300 Mid-Wing (7/27/2006 5:09:41 PM)
Thanks Kevin. Any idea when they may be available? Thanks,

jtec radiowave kid -> RE: 35% Extra 300 Mid-Wing (7/28/2006 3:38:56 PM)
The more order we get the faster it will be, we were told three months from the time we give them the ok. So for those that are interested the sooner you pre order the sooner you will have it.

sillyness -> RE: 35% Extra 300 Mid-Wing (8/18/2006 3:43:08 AM)
What does the bottom look like? Are there any differences in the fuse between this and the 330? The hatch looks identical, though the landing gear mounting is obviously different. Any chance of doing a single seat version of this (ala 260?). I'd go for that.

al -> RE: 35% Extra 300 Mid-Wing (8/24/2006 3:19:41 PM)
Here is a picture of the bottom, for some reason in the picture it looks like the lines are not straight on the wing but they really are. As for the Fuselages they are different but do share some parts such as the hatch. Also the production models will probably have no counter balances on the elevators unlike the prototype. As for a 260, I would say there are enough of them already on the market and honestly we feel the 300 is a smoother, truer flying airplane, thats also more pleasing to look at.

ckoerner -> RE: 35% Extra 300 Mid-Wing (11/25/2006 7:55:24 PM)
Any update? I would like to get a PAK, but if it comes out too late I won't have it ready for next season. Thanks, Craig

jtec radiowave kid -> RE: 35% Extra 300 Mid-Wing (11/28/2006 3:56:33 PM)
Craig, At this point it looks like spring sometime. If your open to options take alook at the PANZL. It flies like and EXTRA but 3D's like an Edge. There are acouple of threads running on diffirent websites. All the guys are amazed by how well they fly. Start a thread and just ask. Al Young JTEC/RADIOWAVE

ckoerner -> RE: 35% Extra 300 Mid-Wing (11/28/2006 4:08:05 PM)
quote: ORIGINAL: jtec radiowave kid Craig, At this point it looks like spring sometime. If your open to options take alook at the PANZL. It flies like and EXTRA but 3D's like an Edge. There are acouple of threads running on diffirent websites. All the guys are amazed by how well they fly. Start a thread and just ask. Al Young JTEC/RADIOWAVE Thanks. Kinda like the 300 though. I am familiar with the Panzl. I helped with the build on Edge's panzl and also got to fly it. Good flyer. Thanks, Craig

jtec radiowave kid -> RE: 35% Extra 300 Mid-Wing (11/28/2006 9:19:56 PM)
Right now we are getting ready to ship the prototype 35% 300 out to Phoenix for there electric festival in January. It is going to be outfitted with some hacker motors which should be awesome.

Geistware -> RE: 35% Extra 300 Mid-Wing (1/10/2007 12:19:30 AM)
I am not ready to order or pre-order but will be looking for a new bird within a month or so. Have these planes been ordered from the factory yet?

frieshoo -> RE: 35% Extra 300 Mid-Wing (1/10/2007 4:38:14 PM)
I'm thinking about getting one. I love the new 35% Extra scheme, but I like the way the Panzel flys... At this point, I'm still waiting on the Extra. Besides, Al's shop is only 1 hr from my house, so I can save on shipping.

al -> RE: 35% Extra 300 Mid-Wing (1/11/2007 10:04:02 PM)
We are waiting on a production date from the factory Al

flyme2dmoon -> RE: 35% Extra 300 Mid-Wing (1/12/2007 2:20:50 PM)
When Don took out the dihedral on the wings of his 40%, he noticed some improvements. Will the production on the 35% (future 40%)going to adapt such change?

al -> RE: 35% Extra 300 Mid-Wing (1/12/2007 4:05:07 PM)
The caliber of pilot Don is, he may notice slight changes. The 330 in its current configuration has won the Ulimited Nats, Competed in the last TOC, Last 3 Masters and all of the Tucson Shootouts. It has won many IMAC competitions in all classes since its introduction. Don is currently flying a highly modified 300 (midwing) prototype. To my knowledge his modifications have not been flown by any of our other sponsored pilots or by us so we can get additional feed back. As with any product we rely on the feedback of our customers. We constantly make improvements to our designs and building. Some are noticable and others are not. Depending on flying skills and setup some of these may or may not be noticable The current 35% planes we manufacture and have prototyped are set in the current design, The best pilots in the world have flown them already and have been very pleased. The 35% Extra 300 was just shipped out to Phoenix for the Electric Festival later this month where Hacker will be installing an electric motor and batteries in it. Andrew Jesky will be putting on a flying demo with it. Al Young JTEC/RADIOWAVE quote: ORIGINAL: flyme2dmoon When Don took out the dihedral on the wings of his 40%, he noticed some improvements. Will the production on the 35% (future 40%)going to adapt such change?

Geistware -> RE: 35% Extra 300 Mid-Wing (1/12/2007 9:53:51 PM)
When will the 35% midwing be available for purchase by the general public?

ben beyer -> RE: 35% Extra 300 Mid-Wing (2/14/2007 6:35:37 AM)
What will the 35% Extra 300 weigh with a DA 100?

jtec radiowave kid -> RE: 35% Extra 300 Mid-Wing (2/14/2007 2:15:36 PM)
Ben, We never weighed it. Youwould have to ask Andrew Jesky or Jason Shulman how it flew with the DA 100 on cans. My guess would be 25 to 27 pounds. But that means nothing unless you take into consideration wing area and airfoil. What you should be asking is how does it fly with a DA 100? Andrew now has the prototype which was converted to electric. He will be making some comments in the next few day about the plane. I think you will find he likes it very much because he has no intention of giving it back. Delivery is on or about mid May. We are taking orders Al Young JTEC/RADIOWAVE

al -> RE: 35% Extra 300 Mid-Wing (3/26/2007 11:12:52 PM)
If anyone is interested in a solid color we need to know soon. Currently we are doing the red and yellow scheme that is on the website. Mid april will be the last date we can do a color change. Al www.jtecrc.com sales@jtecrc.com FYI: we also made additional weight saving improvements which should save an additional 1.5 pounds

al -> RE: 35% Extra 300 Mid-Wing (4/11/2007 2:56:14 PM)
Just thought you may be interested in seeing a couple of pictures of the 35% 300 fuse being built at the factory. Still have a little time left for solid color

Page: [1]

SITE MAP! : : FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

0.390625