Morgan Fuels and Saito.... (Full Version)

All Forums >> [Glow Engines, Gas Engines, Fuel & Mfg Support Forums] >> RC Fuels

Message

---

UCD46@SAITO -> Morgan Fuels and Saito.... (9/15/2006 12:41:06 PM) Hey Everyone!! lately i've been running my Saito 100 with some of the morgan fuels, such as omega Heli 15% and 30%, and Omega 4 stk. Everything worked fine, but when i tried the Cool Power pro pattern 20/20, the engine could'nt hold 5 seconds before it shut off. Does anyone know if the pro pattern fuel is compitible with the 4strk engines, and what is the the difference between Castor/Synthetic (Omega) and total synthetic (Cool Power) fuels??

---

w8ye -> RE: Morgan Fuels and Saito.... (9/24/2006 12:52:48 PM) You have to readjust your needle valve when changing fuel types. Keep in mind that model fuel is a lot like beer. If you don't stick to the most popular types, it may be old and not run good. Pro pattern 20-20 should work very well in your engine. I wouldn't pay extra for four stroke fuel. No one uses it around here. The heli fuels are usually all synthetic. The all synthetic and castor/synthetic mixes are often debated on RCU. Even the different Saito manuals do not agree. Seems like the castor/synthetic blend has won a little more favor around on RCU except for the 3D guys using 30 heli. Personally I use the blend but cannot see any definite proof that all synthetic brings any more harm to your engine than the castor/synthetic blends.

---

Page: [1] 1

SITE MAP!   : :   FORUM RULES © 2001 - 2007 24-7 RC, LLC, all rights reserved.

0.078125