50CC Yak build help....  
View related threads: (in this forum | in all forums)

Tower Hobbies
Enter up to 4 keywords or Tower stock numbers
Logged in as Guest



Users viewing this topic: none
  Printable Version
       



All Forums >> RC Airplanes >> Giant Scale Aircraft - 3D & Aerobatic >> Aero-Works Support >> 50CC Yak build help....
Page: [1]

Login
Message << Older Topic   Newer Topic >>
50CC Yak build help.... - 10/5/2006 2:34:51 PM   
HoverPuss


 

Posts: 20
Joined: 12/29/2004
From: Bellevue, NE, USA
Status: offline 		Once again, my lack of experience has forced me to ask a couple of silly questions.... I have a DA 50 and just got my Slimline Pitts style smoke muffler in. The directions with the muffler say to discard the gasket that came with the motor and use high temp silicone. What is every one else doing, do I use the gasket or silicone? Also, there are some supports that came with the muffler. They will not adequately mount to the motor box so do I need to fabricate a muffler support or just plug the hole with the bolt that came with it? Finally, any of you guys have some pics of your smoke setup? I’m interested in how you mounted the tanks and where you put the pump. I have a Slimline pump also. Thanks for the help!
       Post #: 1

RE: 50CC Yak build help.... - 10/5/2006 2:44:03 PM   
Whirlyspud


 

Posts: 285
Joined: 1/9/2002
From: Morton Grove, IL, USA
Status: offline 		I used hi-temp silicon, and is working fine.....so far Some people use 5 minute epoxy also.

The mount that came with the muffler should go from the muffler to one of the rear head bolts on the da 50. It does not mount to the motor box. Is that how you are trying to use it?


Mike

(in reply to HoverPuss)
       Post #: 2

RE: 50CC Yak build help.... - 10/5/2006 3:39:18 PM   
HoverPuss


 

Posts: 20
Joined: 12/29/2004
From: Bellevue, NE, USA
Status: offline 		WOW! One of the head bolt?!?! I see how it would line up. So I'm suppose to break the seal on this beautiful NEW motor to put the bracket in? Is this what everyone else it doing? Any problems with leaks? Thanks for the info Whirlyspud....



HP

(in reply to Whirlyspud)
       Post #: 3

RE: 50CC Yak build help.... - 10/5/2006 8:35:14 PM   
Whirlyspud


 

Posts: 285
Joined: 1/9/2002
From: Morton Grove, IL, USA
Status: offline 		I fealt the same way at first, but it was no big deal.....One other thing, Check all the bolts on the Da-50 anyway. When mine was brand new out of the box it had a couple loose bolts. Real loose, like not even finger tight.

Mike

(in reply to HoverPuss)
       Post #: 4

Page:   [1]
All Forums >> RC Airplanes >> Giant Scale Aircraft - 3D & Aerobatic >> Aero-Works Support >> 50CC Yak build help....
Page: [1]





Jump to:


Google 



Search | Marketplace | Event Calendar | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Member Video Posts | RCU Video Gallery | Instructor Search | Field|Track|Marina Search

Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

Charities we support that also need your help
Yorkie Rescue | Humane Society | ASPCA | Crohn's-Colitis America

Kaango.com Classifieds

0.422RCU3