new 50 cc yak first flight  
View related threads: (in this forum | in all forums)

Tower Hobbies
Enter up to 4 keywords or Tower stock numbers
Logged in as Guest



Users viewing this topic: none
  Printable Version
       



All Forums >> RC Airplanes >> Giant Scale Aircraft - 3D & Aerobatic >> Aero-Works Support >> new 50 cc yak first flight
Page: [1]

Login
Message << Older Topic   Newer Topic >>
new 50 cc yak first flight - 10/6/2006 9:00:32 PM   
upssteve


 

Posts: 32
Joined: 11/21/2004
From: West palm beach, FL, USA
Status: offline 		plane flies like a dream. had slop on aileronsabout 1/8 up and down. works fine in air though. put 5955 on rudder and ailerons and 5645 on elevator. lands real slow and predicitable. thanks aeroworks for an awesome kit. more to come as i start the 3d thing with this plane.

< Message edited by upssteve -- 10/6/2006 9:02:22 PM >
       Post #: 1

RE: new 50 cc yak first flight - 10/7/2006 12:27:14 AM   
Mark Dennis



Posts: 1324
Joined: 2/24/2004
From: Parker, CO, USA
Status: offline 		Glad to hear you are happy with it! Let us know how you like it when you get a chance to fly it more.

_____________________________

Team Aeroworks
Thank You: Aeroworks, Desert Aircraft, and Smart-Fly

(in reply to upssteve)
       Post #: 2

RE: new 50 cc yak first flight - 10/8/2006 1:16:37 AM   
upssteve


 

Posts: 32
Joined: 11/21/2004
From: West palm beach, FL, USA
Status: offline 		thanks mark. i flew again today the roll rate is awesome and it hovers like a dream. still doing manuvers high but it is a great airplane. da 50 has a lot of power.

(in reply to upssteve)
       Post #: 3

RE: new 50 cc yak first flight - 11/5/2006 9:50:46 AM   
Anders/Helene


 

Posts: 2
Joined: 2/20/2004
From: 5232 Bergen, NORWAY
Status: offline 		Dear Mark,

My 50 cc Yak is almost ready for its maiden, but I have a question regarding the suggested set-up. The 2 1/2'' aileron travel on low rates seems to me to be a bit on the heavy side......? Any experiences with this?

Hope to hear from you soon.

With best regards
Anders Arnesen,
Bergen, Norway

(in reply to Mark Dennis)
       Post #: 4

RE: new 50 cc yak first flight - 11/5/2006 4:49:43 PM   
SKYPILOT


 

Posts: 697
Joined: 12/8/2001
From: Perris, CA, USA
Status: offline 		Hi Anders,

Hey on mine, i use a JR-10X, it has tripple rates, i set the high rate for the FULL 3D throws, mid rate at 75% of full, and low rate at 50% of full. Then i set the expos at 60% high rate, 40% mid rate, and 20% low rate and flew it. Same on all three channels.. In the end, i played with the expo settings a little to get the same center feel in all three rates, and now it's very close to my prefrence. The throws turned out to be perfect for me. The elevator is sensitive, so the expo settings on it will be slightly higher than the other channels. Enjoy it, it's a wonderfull plane and a blast to fly

_____________________________

Regards, Scott

(in reply to Anders/Helene)
       Post #: 5

Page:   [1]
All Forums >> RC Airplanes >> Giant Scale Aircraft - 3D & Aerobatic >> Aero-Works Support >> new 50 cc yak first flight
Page: [1]





Jump to:


Google 



Search | Marketplace | Event Calendar | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Member Video Posts | RCU Video Gallery | Instructor Search | Field|Track|Marina Search

Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

Charities we support that also need your help
Yorkie Rescue | Humane Society | ASPCA | Crohn's-Colitis America

Kaango.com Classifieds

0.547RCU1