|
redcesar -> RE: Buiding pics Waco YMF-5 Barth Modellbau (12/17/2006 9:27 PM)
|
Hi Phil, ORIGINAL: Barlingbomber I see another builder has the ailerons hooked up to a high torque servo in the lower wing only. What are your thoughts on that since you have chosen to put one on each? Peter Barth give you two choices, with two servo's in the lower wing you must instal contra weight attached to the four ailerons. And with a strong servo for each aileron is that not necessary. ORIGINAL: Barlingbomber You may be aware but Peter Barth now puts a plan for your tail mod in the instructions althoug he has a disclaimer on its reliability since he has never built or flown the mod. The mod that you mean in the manual is not the mod i have done, so as Barth suggest is it one peace with the elevator and rudder in one, that is 110 cm wide. I have made, so as you can see on the pictures, only the two elevators removable, the vertical rudder stays on the fuselage. Regards, Cesar
|
|
|
|