32% Yak with cannisters question  
View related threads: (in this forum | in all forums)

Tower Hobbies
Enter up to 4 keywords or Tower stock numbers
Logged in as Guest



Users viewing this topic: none
  Printable Version
       


Carden 35% Extra 260 - RTF
Seller:  jmiracle
Details:   $2,950.00   |  10/2/2008   |  Classified Ad
We will rotate YOUR AD in this spot if you select "Forum Featured" when placing or editing your ad!

All Forums >> RC Airplanes >> Giant Scale Aircraft - 3D & Aerobatic >> Carden Aircraft >> 32% Yak with cannisters question
Page: [1]

Login
Message << Older Topic   Newer Topic >>
32% Yak with cannisters question - 11/22/2006 1:27:49 AM   
ibow24


 

Posts: 263
Joined: 10/27/2003
From: Mohnton, PA, USA
Status: offline 		Hey guys, anybody building a 32% Yak with a DA100 and cannisters?

what headers are you using and how are they fitting inside the motor box? Anything special I need to look out for?
I need to call DA and see what they recommend for this plane but I know there aren't too many 32% Yaks out there yet.

Also, you guys putting the rudders servos in the tail?? That's the way I'm leaning. 1 on each side of the fuse.

thanks for your help
Steve
       Post #: 1

RE: 32% Yak with cannisters question - 11/22/2006 2:02:36 AM   
jmiracle


 

Posts: 592
Joined: 5/13/2002
From: Findlay, OH, USA
Status: offline 		I'm looking for the same info if anyone already has it. I haven't called DA yet...but plan to later this winter.

My 32% is just about ready to cover...just a few details to finish up.

Steve, I added mounts in the rear of the fuse for rudder servos. I'm going to give it a shot. If it ends up tail heavy, I can always add a pull-pull setup.

Attachments
Click to see fullsize image.
Click for fullsize

(in reply to ibow24)
       Post #: 2

RE: 32% Yak with cannisters question - 11/22/2006 6:05:42 AM   
madcapper



Posts: 8
Joined: 4/4/2002
From: Hartford, WI, USA
Status: offline 		You will need to use a 50mm drop header. I will post pictures of mine.

(in reply to jmiracle)
       Post #: 3

RE: 32% Yak with cannisters question - 11/22/2006 1:26:00 PM   
swk550



Posts: 278
Joined: 4/18/2003
From: houston, TX, USA
Status: online 		I am using a DA 100 and MTW TD75K canisters on my 32%Yak. You will need the 50mm drop flex headers. The canisters are a tight fit. If you want some more room, then I would use the smaller diameter TD75 canisters. I am using the smaller diameter cans on my QQ 102" Yak with great success. I leave the flex headers full length and have great power and throttle response.

Good luck,

Steve

Attachments
Click to see fullsize image.
Click for fullsize 		Click to see fullsize image.
Click for fullsize 		Click to see fullsize image.
Click for fullsize 		Click to see fullsize image.
Click for fullsize
Click to see fullsize image.
Click for fullsize 		Click to see fullsize image.
Click for fullsize

(in reply to madcapper)
       Post #: 4

RE: 32% Yak with cannisters question - 11/22/2006 4:04:26 PM   
zzw26n



Posts: 712
Joined: 5/18/2004
From: Shelby Twp., MI, USA
Status: online

Steve,

The TD75's are longer, will they fit? Your picture looks like the TD75K's , correct?

Thanks, Ward

(in reply to swk550)
       Post #: 5

RE: 32% Yak with cannisters question - 11/22/2006 9:27:40 PM   
swk550



Posts: 278
Joined: 4/18/2003
From: houston, TX, USA
Status: online 		Ward,

I think you are on to something. I don't know how much longer the TD75's are longer. The rear bulkhead can be easily modified to clear the canisters. I had the TD75K's so I used them. Sorry, I don't know how much longer they are.

Good luck,

Steve

(in reply to zzw26n)
       Post #: 6

RE: 32% Yak with cannisters question - 11/24/2006 6:06:09 AM   
madcapper



Posts: 8
Joined: 4/4/2002
From: Hartford, WI, USA
Status: offline 		Pictures of my set-up.

Attachments
Click to see fullsize image.
Click for fullsize 		Click to see fullsize image.
Click for fullsize 		Click to see fullsize image.
Click for fullsize 		Click to see fullsize image.
Click for fullsize
Click to see fullsize image.
Click for fullsize 		Click to see fullsize image.
Click for fullsize 		Click to see fullsize image.
Click for fullsize

(in reply to swk550)
       Post #: 7

Page:   [1]
All Forums >> RC Airplanes >> Giant Scale Aircraft - 3D & Aerobatic >> Carden Aircraft >> 32% Yak with cannisters question
Page: [1]





Jump to:


Google 



Search | Marketplace | Event Calendar | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Member Video Posts | RCU Video Gallery | Instructor Search | Field|Track|Marina Search

Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

Charities we support that also need your help
Yorkie Rescue | Humane Society | ASPCA | Crohn's-Colitis America

Kaango.com Classifieds

0.469RCU1