|
ClodAholic -> RE: OFFICIAL Team Losi Micro-T thread !!!!!!!!!!!!!!!!!!!!!!!!!!!! (12/9/2006 7:30:01 PM)
|
here is a quik tip /fix for anyone that doesn't know yet. when you get your micro-t the first think you break mostl likely will be the steering tie rod, when you do dont waste time buying the spares they will just break again instead get yourself small zip ties the smaller then better cut them to exact lengh use a exacto knife to carve a hole for the scrws and blamo you will most likely not ever break that again, and the servo is equiped with a saver so dont worry about that part unless ofcourse u are a HARD drive on your cars.. ANY tips found here are to be used/ done with your own discretion and and faults cause by them are your responisblity Here couple pics showing mine one with stock on and one with small ziptie [image]http://www.gotmyshirt.com/microt/mtsteer.jpg[/image] [image]http://www.gotmyshirt.com/microt/mtsteer2.jpg[/image]
|
|
|
|