Moki 1.8 / Turbo-Jett muffler? (Full Version)

All Forums >> [Glow Engines, Gas Engines, Fuel & Mfg Support Forums] >> Engine Manufacturers Direct Support Forum >> Jett Engineering Support



Message

Meschmidt -> Moki 1.8 / Turbo-Jett muffler? (12/17/2006 3:17:23 AM)

Does Jett make an in cowl muffler to fit a Moki 1.8, if so what kind of performance gain can be expected? Thanks, Paul



bob27s -> RE: Moki 1.8 / Turbo-Jett muffler? (12/18/2006 2:25:34 PM)

Hi,

Thanks for writing.

Yes, Dub does off a turbo-jett for the larger Moki engines.

Performance increase is notible. Boost is similar to what we see with the OS160 - 300-500 rpm - which at these 18" prop sizes is a big increase in power). Most notibly there is a torque increase - so you can either take the rpm gain, or move up in prop size and keep the engine in the same rpm range it runs with a stock muffler.

Bob



Airnondas -> RE: Moki 1.8 / Turbo-Jett muffler? (1/7/2008 3:39:26 AM)

Hi Bob

Does Jett make a tune pipe or muffler for the Moki 2.10

Thanks.
_______________

Airnondas.



bob27s -> RE: Moki 1.8 / Turbo-Jett muffler? (1/7/2008 6:21:26 PM)

hmmmmmmm......

It is the same muffler used for the 1.8 engine.

There is not a huge amount of boost because the basic rpm tends to be lower.

Email Dub at jettengr@sbcglobal.net --- he has a bit more experience with the bigger engines.



Airnondas -> RE: Moki 1.8 / Turbo-Jett muffler? (1/9/2008 5:36:29 AM)

Thank you Bob for the fast reply.

I will write to Dub and see if I can get some more info.
____________

Airnondas



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.109375