A note on using Intellect 4200 for glow drivers  
View related threads: (in this forum | in all forums)

Tower Hobbies
Enter up to 4 keywords or Tower stock numbers
Logged in as Guest



Users viewing this topic: none
  Printable Version
       


FISHER FUEL PRODUCTS 5 GALLON & 2.5 GAS FUELERS
Seller:  hunternfla
Details:   $220.00   |  11/22/2008   |  Classified Ad
We will rotate YOUR AD in this spot if you select "Forum Featured" when placing or editing your ad!

All Forums >> Radios, Batteries, Clubhouse and more >> Batteries & Chargers >> A note on using Intellect 4200 for glow drivers
Page: [1]

Login
Message << Older Topic   Newer Topic >>
A note on using Intellect 4200 for glow drivers - 3/4/2007 2:34:45 PM   
rajul



Posts: 6478
Joined: 6/18/2002
From: Missouri City, TX, USA
Status: offline 		I replaced an old cell in my Great Planes glow driver recently with an Intellect 4200mah NiMH. I found that the cell outer diameter is a tight fit for the glow driver case and while pushing it in, the sleeve tore. What I did was to remove the sleeve completely and wrap the cell with one round of packing tape. The cell was able to fit the glow driver snugly without tearing the tape. I thought that this info might be useful for those contemplating to use an Intellect cell for their glow driver. I am not sure about other brands of glow drivers (e.g. Dubro, etc) but if you find the fit too tight, you could use packing tape to replace the thicker sleeve. Make sure that the packing tape extends a little over the top and bottom edges of the cell for proper insulation from the glow driver case (the cell must not short with the case, only contacting the +ve and -ve terminals). Blue skies!

Attachments
Click to see fullsize image.
Click for fullsize


< Message edited by rajul -- 3/4/2007 4:36:01 PM >

_____________________________

Mike Marks
RCU Moderator
Aerofly Support Representative http://www.aerofly.com/index.html
       Post #: 1

Page:   [1]
All Forums >> Radios, Batteries, Clubhouse and more >> Batteries & Chargers >> A note on using Intellect 4200 for glow drivers
Page: [1]





Jump to:


Google 



Search | Marketplace | Event Calendar | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Member Video Posts | RCU Video Gallery | Instructor Search | Field|Track|Marina Search

Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

Charities we support that also need your help
Yorkie Rescue | Humane Society | ASPCA | Crohn's-Colitis America

Kaango.com Classifieds

0.688RCU2