Addendum: .46-.61 Edge 540T  
View related threads: (in this forum | in all forums)

Tower Hobbies
Enter up to 4 keywords or Tower stock numbers
Logged in as Guest



Users viewing this topic: none
  Printable Version
       



All Forums >> RC Airplanes >> Giant Scale Aircraft - 3D & Aerobatic >> Aero-Works Support >> Addendum: .46-.61 Edge 540T
Page: [1]

Login
Message << Older Topic   Newer Topic >>
Addendum: .46-.61 Edge 540T - 3/7/2007 11:08:55 PM   
WarbirdAirRacer


 

Posts: 641
Joined: 12/18/2002
From: Littleton, CO, USA
Status: offline 		Update for The latest .46-.61 Edge 540T.

We have found the 4-40 hardware for the engine motor mount and the main landing gear to be the wrong size. They were to be 6-32 hardware but came over as 4-40. So if you have one of the newest Edges between 01/07 to todays date please call us so we can sent you the updated 6-32 hardware. Here is a link to the info! Addendum Link


Sorry for any Inconviance this may cause.


John@Aero-Works
303-366-4205

< Message edited by John@Aero-Works -- 3/7/2007 11:09:54 PM >

_____________________________

Tat-Tude 379
       Post #: 1

RE: Addendum: .46-.61 Edge 540T - 3/13/2007 12:20:24 AM   
flyn hy


 

Posts: 27
Joined: 10/22/2006
From: West Rushville, OH, USA
Status: offline 		John,
Why is the replacement suggested?
Mike

(in reply to WarbirdAirRacer)
       Post #: 2

RE: Addendum: .46-.61 Edge 540T - 3/14/2007 5:16:50 AM   
WarbirdAirRacer


 

Posts: 641
Joined: 12/18/2002
From: Littleton, CO, USA
Status: offline 		Hello,


We found this is a problem as the 4-40s that came with the kit are to small for the motor mount to bolt to the firewall and for the main landing gear.....The 4-40s were put in there by mistake...if you have any questions please feel free to give me a call tomorrow at 303-366-4205


John@Aero-Works.

_____________________________

Tat-Tude 379

(in reply to flyn hy)
       Post #: 3

RE: Addendum: .46-.61 Edge 540T - 3/22/2007 5:06:21 PM   
i300i


 

Posts: 5
Joined: 9/9/2004
From: The Great White North, MN, USA
Status: offline 		Hey John:

I received my upgrade parts in the mail last week. I found that the #6-32 bolts are too long for the engine mount application. They extend about .3" past back of the T-nuts in the firewall, interfering with the tank installation. I cut mine off at .7" length and they end-up flush with the back of the T-nut (I'm using a lock washer and a flat washer on the bolt head, which add-up to about .065" thickness).

(in reply to WarbirdAirRacer)
       Post #: 4

RE: Addendum: .46-.61 Edge 540T - 3/27/2007 6:08:16 PM   
SuddenSam


 

Posts: 29
Joined: 8/22/2005
From: ANN ARBOR, MI, USA
Status: offline 		I called on Friday to have the parts sent to me and when I got home from work on Monday the parts were there!!!

I found that you need to cut the top two bolts down about 1/4" so they do puncture the tank. Forunately I had saved the tank installation for last or I might have ended up punching a hole through the tank when I put the new bolts in. The other thing I noticed is that I had to enlarge the holes in the motor mount slightly so the larger bolts would allow the motor mount to slide back an forth on the bolt to allow proper positioning of the mounts.

This was my first plane form AreoWorks and because I was impressed with the quality I purchased the 50cc Extra. I have a DA 100 looking for a home so if I can figure out a way to convince the boss that I absolutley need another plane then I will order either the 100cc Yak or the Extra. I have a great idea - why don't you put them on sale then I can tell the boss that I can save all this money if I buy the plane on sale. She uses that logic on me so I don't see why it won't work for me too.

Thanks for the great custome support.

(in reply to WarbirdAirRacer)
       Post #: 5

RE: Addendum: .46-.61 Edge 540T - 10/12/2007 9:24:23 AM   
MrEdge


 

Posts: 20
Joined: 3/14/2007
From: Roy, UT, USA
Status: offline 		In the video of the 46-61 Edge, what motor and prop are you using to power it?

(in reply to SuddenSam)
       Post #: 6

RE: Addendum: .46-.61 Edge 540T - 12/30/2007 3:56:24 AM   
weruweru


 

Posts: 26
Joined: 4/9/2007
From: Miami, FL, USA
Status: offline 		I think, it's a Magnum 90 ....

(in reply to MrEdge)
       Post #: 7

RE: Addendum: .46-.61 Edge 540T - 1/27/2008 5:21:24 PM   
hollywood54



Posts: 181
Joined: 10/7/2005
From: Somerset, MA, USA
Status: online 		Mr.Edge, In the video he is using a 91 magnum 4stk.When you see the hovering part he has a 120 4 stk.I know this because i talked to him on the phone.He is a really cool guy,easy to talk too.

_____________________________

HBK2

(in reply to weruweru)
       Post #: 8

Page:   [1]
All Forums >> RC Airplanes >> Giant Scale Aircraft - 3D & Aerobatic >> Aero-Works Support >> Addendum: .46-.61 Edge 540T
Page: [1]





Jump to:


Google 



Search | Marketplace | Event Calendar | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Member Video Posts | RCU Video Gallery | Instructor Search | Field|Track|Marina Search

Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

Charities we support that also need your help
Yorkie Rescue | Humane Society | ASPCA | Crohn's-Colitis America

Kaango.com Classifieds

0.578RCU1