hitec 5985s 172oz aeroworks 50cc yak  
View related threads: (in this forum | in all forums)

Tower Hobbies
Enter up to 4 keywords or Tower stock numbers
Logged in as Guest



Users viewing this topic: none
  Printable Version
       



All Forums >> RC Airplanes >> Giant Scale Aircraft - 3D & Aerobatic >> Aero-Works Support >> hitec 5985s 172oz aeroworks 50cc yak
Page: [1]

Login
Message << Older Topic   Newer Topic >>
hitec 5985s 172oz aeroworks 50cc yak - 4/5/2007 12:14:09 AM   
barger


 

Posts: 28
Joined: 1/28/2007
From: ottawa, ON, CANADA
Status: offline 		Anybody out there tried the 5985s in the 50 cc yak i am trying to stay on budget and still have a respectable,plane when finished i understand the 5945s would work at 180 oz upon research the 5985s a improved version of the5945s at slightly less tourqe 172 oz and would fit my budget any comments would be great thnks.
       Post #: 1

RE: hitec 5985s 172oz aeroworks 50cc yak - 4/5/2007 2:09:14 AM   
HoverPuss


 

Posts: 20
Joined: 12/29/2004
From: Bellevue, NE, USA
Status: offline 		The 5945's are only $71 each at servo city right now!!!! Is there a differance between the 45's and 85's besides 9 oz of torque? Yes I know this is the AW form (I have a yak with 5985's in it), but I would rather ask you guys sine I'm looking at putting something in a 100cc 260....



HP

(in reply to barger)
       Post #: 2

RE: hitec 5985s 172oz aeroworks 50cc yak - 4/5/2007 3:21:43 AM   
barger


 

Posts: 28
Joined: 1/28/2007
From: ottawa, ON, CANADA
Status: offline 		hover puss love the name lol , yes thats a great price thanks i will look into it .Its hard to find good deals for the american dollar is worth more than the loonie!

(in reply to HoverPuss)
       Post #: 3

RE: hitec 5985s 172oz aeroworks 50cc yak - 6/10/2007 9:17:04 PM   
Robby368


 

Posts: 134
Joined: 7/1/2006
From: Martinez, GA, USA
Status: offline 		I have 5985's on all my control surfaces on the AW 50cc Yak, no problems at all.

_____________________________

Takeoff is optional, landing is MANDATORY!

(in reply to barger)
       Post #: 4

RE: hitec 5985s 172oz aeroworks 50cc yak - 6/11/2007 8:16:34 PM   
Mark Dennis



Posts: 1358
Joined: 2/24/2004
From: Parker, CO, USA
Status: offline 		The 5985's will work fine on the 50cc Yak but like has been said above there are some very good deals on the 45's right now. Either one of those servos however will work great!

_____________________________

Team Aeroworks
Thank You: Aeroworks, Desert Aircraft, and Smart-Fly

(in reply to Robby368)
       Post #: 5

RE: hitec 5985s 172oz aeroworks 50cc yak - 6/12/2007 2:20:23 AM   
gregman50


 

Posts: 221
Joined: 11/24/2005
From: Mt. Holly, NC, USA
Status: offline 		The 5985's are a better servo, gears are better and will have no slop after a season of flying, I'm using them on a 50cc AW Yak, no problems.

(in reply to Mark Dennis)
       Post #: 6

RE: hitec 5985s 172oz aeroworks 50cc yak - 6/13/2007 12:28:13 AM   
1bwana1


 

Posts: 97
Joined: 6/17/2006
From: La Jolla, CA, USA
Status: offline 		Get the 5985, the price difference is small for the increase in quality. I have had a lot of problems with centering on the less expensive Hitec servos.

(in reply to gregman50)
       Post #: 7

RE: hitec 5985s 172oz aeroworks 50cc yak - 8/1/2007 1:39:07 AM   
mowery1


 

Posts: 366
Joined: 1/1/2007
From: Bedford, IN, USA
Status: offline 		Are the HS 5645 mg servos not good enough for the Yak 54 50cc.... specs show 168 oz. of torque...i just bought a 50 cc Yak and need to buy servos that's why i'm asking..thanks,, Rick

_____________________________

Authorized dealer for Fei Bao, Tamjets, Yellow Aircraft, Jetcat, Aero-Works, FlyEagle Jets, QQ aircraft

(in reply to Mark Dennis)
       Post #: 8

RE: hitec 5985s 172oz aeroworks 50cc yak - 8/1/2007 1:40:36 AM   
mowery1


 

Posts: 366
Joined: 1/1/2007
From: Bedford, IN, USA
Status: offline 		Forgot to ask..Do i need 5 or 6 servos total for the Aero-works 50 cc Yak...Thanks..

_____________________________

Authorized dealer for Fei Bao, Tamjets, Yellow Aircraft, Jetcat, Aero-Works, FlyEagle Jets, QQ aircraft

(in reply to mowery1)
       Post #: 9

RE: hitec 5985s 172oz aeroworks 50cc yak - 8/1/2007 2:14:33 AM   
Grelker



Posts: 199
Joined: 8/28/2004
From: Bellevue, WA, USA
Status: offline 		Use the 5985's. I have them on the 50cc yak, extra and 100cc extra except for 5955's on the rudder. You'll need 5 if you use a 5985 on the rudder.

_____________________________

Jon N.

(in reply to mowery1)
       Post #: 10

RE: hitec 5985s 172oz aeroworks 50cc yak - 8/1/2007 2:26:36 AM   
mowery1


 

Posts: 366
Joined: 1/1/2007
From: Bedford, IN, USA
Status: offline 		Thanks, I went ahead and ordered 5 of the HS 5985's...I was looking at the 5645's ..they were a little less expensive asnd had 168 oz. of torque....I'm not planning on doing any 3D stuff for a while... That's why I thought the 5645's would be OK..... Anyway I took the plunge and bought the better servo..Thanks for the advice...Rick

_____________________________

Authorized dealer for Fei Bao, Tamjets, Yellow Aircraft, Jetcat, Aero-Works, FlyEagle Jets, QQ aircraft

(in reply to Grelker)
       Post #: 11

RE: hitec 5985s 172oz aeroworks 50cc yak - 8/1/2007 2:33:22 AM   
reyn3545



Posts: 983
Joined: 7/1/2006
From: Alpharetta, GA, USA
Status: offline 		I made the same mistake on another plane... and found out that these servos are SO SLOW... I wouldn't fly with them. I'm not a 3D guy either, and they would probably have been fine, but with digitals, you expect an immediate response.. and the 5645's just don't give it.

(in reply to mowery1)
       Post #: 12

Page:   [1]
All Forums >> RC Airplanes >> Giant Scale Aircraft - 3D & Aerobatic >> Aero-Works Support >> hitec 5985s 172oz aeroworks 50cc yak
Page: [1]





Jump to: