RE: ****NITROMODELS REPLACEMENT PARTS REQUEST HERE ***** (Full Version)

All Forums >> [RC Airplanes] >> ARF or RTF >> NitroModels Support



Message

Beaver Lover -> RE: ****NITROMODELS REPLACEMENT PARTS REQUEST HERE ***** (8/16/2007 4:09:05 AM)

John,

I received the Bronco parts today. Thank you very much. As I was diging around inside the box to find the parts, I felt something that I thought was a rock. When I pulled it out it was the last three bites of a Philly Cheese Steak sandwich. I had to laugh! Now you can REALLY say that you have stepped up your customer service!

Thanks again,

Beav



nitrostaff1 -> RE: ****NITROMODELS REPLACEMENT PARTS REQUEST HERE ***** (8/18/2007 2:11:16 AM)

oh sorry about this. I've already spoken to the employees at the warehouse and this will not happen again.

Sorry for the incovience
John
Nitro Planes

quote:

ORIGINAL: Beaver Lover

John,

I received the Bronco parts today. Thank you very much. As I was diging around inside the box to find the parts, I felt something that I thought was a rock. When I pulled it out it was the last three bites of a Philly Cheese Steak sandwich. I had to laugh! Now you can REALLY say that you have stepped up your customer service!

Thanks again,

Beav




Beaver Lover -> RE: ****NITROMODELS REPLACEMENT PARTS REQUEST HERE ***** (8/20/2007 12:17:25 PM)

No inconvenience, I thought it was funny! I was just glad to be receiving those parts.

My Bronco is now ready to fly again. I can't wait to get it back to the airfield again.

Thanks again for your help John.

Bryan



GUAIO -> RE: ****NITROMODELS REPLACEMENT PARTS REQUEST HERE ***** (8/20/2007 10:47:59 PM)

Hi

I need a fuselage for a T-34 mentor....yellow...let me know how much??



gelandestrasse -> RE: ****NITROMODELS REPLACEMENT PARTS REQUEST HERE ***** (8/23/2007 11:59:09 PM)

hows it going, i just finished my fiberglass yak- 54 (50 size). the rudder cable was not long enuff to make two sets, but i already resolved the prob. what i wated to know is if it is possible to get a new cowl, i kinda buchered it around the muffler. i've yet to fly it, but if it flys good i would like to have a new cowl.
this is a beutiful little plane and went together well, i hope it flys as good as my 50 size giles-202 i purchased from you.

thanx
pete



nitrostaff1 -> RE: ****NITROMODELS REPLACEMENT PARTS REQUEST HERE ***** (8/28/2007 1:07:36 AM)

New cowl sent via USPS 420894069101805213907854536287

Thanks
John
Nitro Planes


quote:

ORIGINAL: gelandestrasse

hows it going, i just finished my fiberglass yak- 54 (50 size). the rudder cable was not long enuff to make two sets, but i already resolved the prob. what i wated to know is if it is possible to get a new cowl, i kinda buchered it around the muffler. i've yet to fly it, but if it flys good i would like to have a new cowl.
this is a beutiful little plane and went together well, i hope it flys as good as my 50 size giles-202 i purchased from you.

thanx
pete




damon -> RE: ****NITROMODELS REPLACEMENT PARTS REQUEST HERE ***** (8/30/2007 2:59:29 PM)

Hi,

I purchased a cessna 182 50 size from you guys. When I received it, after examining all the parts, I noticed a crack along the base of the vertical tail on the fuselage. The vertical tail is also slightly leaning to that side by 1/8". What can you do for me? I haven't started building my kit because of this problem. A replacement fuse would be appreciated.

thanks,

Damon A. Peterson



opjose -> RE: ****NITROMODELS REPLACEMENT PARTS REQUEST HERE ***** (8/30/2007 5:01:10 PM)


quote:

ORIGINAL: damon

Hi,

I purchased a cessna 182 50 size from you guys. When I received it, after examining all the parts, I noticed a crack along the base of the vertical tail on the fuselage. The vertical tail is also slightly leaning to that side by 1/8". What can you do for me? I haven't started building my kit because of this problem. A replacement fuse would be appreciated.

thanks,

Damon A. Peterson


The "Lean" is to scale. The real Cessna's have this too to combat P-factor effects.

This threw me too, until I saw that both the .52 and the larger 1.20 both were identically made, and someone else here referred to the real Cessna's specs.

If the crack is hairline, you could merely apply a little CA to prevent the crack from growing, as it is probably just superficial. This happens often with Gel coated fiberglass fuses and I've flown many like this w/o any problems.

If it is big ( a wide crack ) and unsightly however it may need replacement.




moki180 -> RE: ****NITROMODELS REPLACEMENT PARTS REQUEST HERE ***** (9/4/2007 10:35:26 PM)

I would like to get a another canopy for a DeHavilland Mosquito Twin my has gotton really cloudy just sitting in my over the last 6 months basement.

Frank Mayer,Cold Lake



nitrostaff1 -> RE: ****NITROMODELS REPLACEMENT PARTS REQUEST HERE ***** (9/7/2007 9:39:27 PM)

New Canopy sent. Thanks

John
Nitro Planes

quote:

ORIGINAL: moki180

I would like to get a another canopy for a DeHavilland Mosquito Twin my has gotton really cloudy just sitting in my over the last 6 months basement.

Frank Mayer,Cold Lake





Basscatcher -> RE: ****NITROMODELS REPLACEMENT PARTS REQUEST HERE ***** (9/9/2007 2:59:24 AM)

Dear Nitroplanes
I recently ordered three (3) 60 Tower pro electronic brushless motor speed controller ESC and received three (3) Tower Pro 70 that I can't use. Being that I have not received any receipt or documentation from my recent 8/20/07 order. I need to return the 70 Amp and please send me the Tower Pro 60 Amp. Order number yhst-17210252890263-26758. Thank you, Wayne wemardis@centurytel.net (318) 235-5963.




krkenned -> RE: ****NITROMODELS REPLACEMENT PARTS REQUEST HERE ***** (9/10/2007 2:23:30 AM)

The landing gear broke on my CMPro Giant Scale J3 Piper Cub 120 - 91". I did not see a replacement to this on your website. Is there any way to get another set?

Thanks!



fpc777 -> RE: ****NITROMODELS REPLACEMENT PARTS REQUEST HERE ***** (9/10/2007 4:52:32 PM)

I NEED A REPLACEMENT CANOPY FOR MY 50CC YAK 54. HOW CAN I GET THIS ???

MY E-MAIL IS FCOTT1@YAHOO.COM

THANKS
FRANK



Basscatcher -> RE: ****NITROMODELS REPLACEMENT PARTS REQUEST HERE ***** (9/10/2007 9:32:07 PM)

Dear Nitroplanes
I recently ordered three (3) 60 Tower pro electronic brushless motor speed controller ESC and received three (3) Tower Pro 70 that I can't use. Being that I have not received any receipt or documentation from my recent 8/20/07 order. I need to return the 70 Amp and please send me the Tower Pro 60 Amp. Order number yhst-17210252890263-26758. Thank you, Wayne wemardis@centurytel.net (318) 235-5963.



I fly RC2 -> RE: ****NITROMODELS REPLACEMENT PARTS REQUEST HERE ***** (9/10/2007 9:53:57 PM)

Received my replacement Falcon 120 canopy just as John promised. Thanks for your support John.

Great after sales support by you and your team.

Thanks Nitro Models.

regards

Gary



opjose -> RE: ****NITROMODELS REPLACEMENT PARTS REQUEST HERE ***** (9/10/2007 10:11:47 PM)


quote:

ORIGINAL: Basscatcher

Dear Nitroplanes
I recently ordered three (3) 60 Tower pro electronic brushless motor speed controller ESC and received three (3) Tower Pro 70 that I can't use. Being that I have not received any receipt or documentation from my recent 8/20/07 order. I need to return the 70 Amp and please send me the Tower Pro 60 Amp. Order number yhst-17210252890263-26758. Thank you, Wayne wemardis@centurytel.net (318) 235-5963.


Is it you cannot use them because of the BEC?

If so you may want to purchase a standalone BEC as they are fairly inexpensive, and keep the more powerful 70A ESC.

I had the same experience with exactly the same problem, but I ended purchasing a second party BEC... ( you can also use a flight pack if your plane is not too small, but the BEC is a better idea... ).




astro2724 -> RE: ****NITROMODELS REPLACEMENT PARTS REQUEST HERE ***** (9/11/2007 5:28:30 PM)

I need a tiger moth 1.20 cowl will you be getting any more in. Thank you.



av8or48 -> RE: ****NITROMODELS REPLACEMENT PARTS REQUEST HERE ***** (9/12/2007 12:53:15 AM)

Dear Nitroplane,
I purchased a falcon 120 ( 90A89B) on August 13, 2007 , Order # 221893 which arrived with a broken canopy.
On august 23, 2007 support E-mail me that thay have shipped a new canopy , I have yet to receive it
I have tried to get in contact with your costumer service to no avail.
Can you please help ???
Thank you



nitrostaff1 -> RE: ****NITROMODELS REPLACEMENT PARTS REQUEST HERE ***** (9/12/2007 1:34:25 AM)

New canopy sent.

Thanks
John
Nitro Planes

quote:

ORIGINAL: fpc777

I NEED A REPLACEMENT CANOPY FOR MY 50CC YAK 54. HOW CAN I GET THIS ???

MY E-MAIL IS FCOTT1@YAHOO.COM

THANKS
FRANK




nitrostaff1 -> RE: ****NITROMODELS REPLACEMENT PARTS REQUEST HERE ***** (9/12/2007 2:56:36 AM)

New landing gear shipped.

Thanks
John
Nitro Planes
quote:

ORIGINAL: krkenned

The landing gear broke on my CMPro Giant Scale J3 Piper Cub 120 - 91". I did not see a replacement to this on your website. Is there any way to get another set?

Thanks!




arcticflyer -> RE: ****NITROMODELS REPLACEMENT PARTS REQUEST HERE ***** (9/12/2007 4:56:39 PM)

John,
On my first landing with the P-51D 60 (Double Trouble) the main landing gear popped out of the wings. The landing was hard but not hard enough to cause this to happen. I have since fixed the wings and have several flights with harder landing than the first and my gear fix is still working. All I need is a (cowl) for the (Double Trouble) which is silver and black in color to replace the one that was damaged when the gear came out. I'm not worried about the wing as it is better now than factory. I just need a new cowl. Original order number 214566. Thanks for any help you can give. You might want to let the factory know that some additional bracing and epoxy in the area of the gear would fix this problem with the model. Additional lite ply on both sides of the ribs that hold the gear and larger mounting blocks. The slight additional weight will not make any difference in the flight of the plane or the balance. Stanley Wilson



nitrostaff1 -> RE: ****NITROMODELS REPLACEMENT PARTS REQUEST HERE ***** (9/13/2007 11:24:35 PM)

New cowl sent.

Thanks
John
Nitro Planes
quote:

ORIGINAL: arcticflyer

John,
On my first landing with the P-51D 60 (Double Trouble) the main landing gear popped out of the wings. The landing was hard but not hard enough to cause this to happen. I have since fixed the wings and have several flights with harder landing than the first and my gear fix is still working. All I need is a (cowl) for the (Double Trouble) which is silver and black in color to replace the one that was damaged when the gear came out. I'm not worried about the wing as it is better now than factory. I just need a new cowl. Original order number 214566. Thanks for any help you can give. You might want to let the factory know that some additional bracing and epoxy in the area of the gear would fix this problem with the model. Additional lite ply on both sides of the ribs that hold the gear and larger mounting blocks. The slight additional weight will not make any difference in the flight of the plane or the balance. Stanley Wilson




arcticflyer -> RE: ****NITROMODELS REPLACEMENT PARTS REQUEST HERE ***** (9/14/2007 2:41:57 AM)

Thanks for the prompt service! Skip



cje0114 -> RE: ****NITROMODELS REPLACEMENT PARTS REQUEST HERE ***** (9/15/2007 8:20:01 PM)

I need a new landing gear, wheel pants, and a cowl for my Yellow Ultimate 1.20

Can you help me out?

Chris



angecarl -> RE: ****NITROMODELS REPLACEMENT PARTS REQUEST HERE ***** (9/16/2007 2:21:44 PM)

I NEED a cowl for the CMP Cessna 182 (140size) and also a landing gear set for the same plane. When will the landing gear be available on your web page.

Thanks
Carl



Page: <<   < prev  1 2 [3] 4 5 6 7 8 9 10   next >   >>  

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.421875