RE: ****NITROMODELS REPLACEMENT PARTS REQUEST HERE *****

RE: ****NITROMODELS REPLACEMENT PARTS REQUEST HERE ***** (Full Version)

All Forums >> [RC Airplanes] >> ARF or RTF >> NitroModels Support

Message

nitrostaff1 -> RE: **NITROMODELS REPLACEMENT PARTS REQUEST HERE *** (2/19/2008 3:18:52 AM)
sure, Can I get your email? Thanks John Nitro Planes quote: ORIGINAL: jbruce Do you have a copy of the RED Polecat build manual available online? I would like to get a copy if available. Or please provide the recommended CG and engine mount location/dimensions on the firewall. Thanks Joe

bigdreama -> RE: **NITROMODELS REPLACEMENT PARTS REQUEST HERE *** (2/19/2008 8:56:14 PM)
JOHN, Your the best man.........I recieved my cowl today and it fits great! Lancair (52) Thank you for all of your effort. Shawn M.

wl7cpa -> RE: **NITROMODELS REPLACEMENT PARTS REQUEST HERE *** (2/20/2008 8:51:54 AM)
RE: P82 twin mustang I received another set of inadequate gear for the P82 I purchased from you. Under the softest of landings, and try to land a twin soft, they still bend every time. In addition, both sets wobble tremendously, making for embarressing taxis, and impossible to keep straight. Shims did not help much. I finally purchased a set of fixed wire gear to replace the retractable rubber bands you call gear. What a joke.

nitrostaff1 -> RE: **NITROMODELS REPLACEMENT PARTS REQUEST HERE *** (2/20/2008 11:13:02 PM)
Sorry about this. We only have the original retracts for the p82. Since you got fixed landing gear I can issue a partial credit for the not so good retract. Let me know John Nitro Planes quote: ORIGINAL: wl7cpa RE: P82 twin mustang I received another set of inadequate gear for the P82 I purchased from you. Under the softest of landings, and try to land a twin soft, they still bend every time. In addition, both sets wobble tremendously, making for embarressing taxis, and impossible to keep straight. Shims did not help much. I finally purchased a set of fixed wire gear to replace the retractable rubber bands you call gear. What a joke.

wl7cpa -> RE: **NITROMODELS REPLACEMENT PARTS REQUEST HERE *** (2/20/2008 11:44:31 PM)
What do you need to refund partial credit?

opjose -> RE: **NITROMODELS REPLACEMENT PARTS REQUEST HERE *** (2/21/2008 12:23:17 AM)
He'll ask for your order number.

jbruce -> RE: **NITROMODELS REPLACEMENT PARTS REQUEST HERE *** (2/21/2008 3:10:18 PM)
Yes, my email address is joe_b_34690@yahoo.com Thanks so much for getting back.

nitrostaff1 -> RE: **NITROMODELS REPLACEMENT PARTS REQUEST HERE *** (2/21/2008 10:21:11 PM)
check your email for the manual. Thanks John Nitro Planes quote: ORIGINAL: jbruce Yes, my email address is joe_b_34690@yahoo.com Thanks so much for getting back.

Old River Rat -> RE: **NITROMODELS REPLACEMENT PARTS REQUEST HERE *** (2/22/2008 12:05:30 AM)
John thanks for the replacement wing this will get me back in the air nitro model is getting somewhere with this great customer service through RC universe forms Again thanks John will do bussiness again [8D] Old River Rat

jbruce -> RE: **NITROMODELS REPLACEMENT PARTS REQUEST HERE *** (2/22/2008 3:14:30 AM)
John, thanks a million for the Polecat manual, this will greatly help with the build. Thanks again, Joe

nickstnick -> RE: **NITROMODELS REPLACEMENT PARTS REQUEST HERE *** (2/23/2008 1:29:59 AM)
Hello John, Due to some misfortune, I am needing both wings with ailerons for the large CMP 140 73 P-40 Warhawk ARF. Just let me know what the deal is so I can finish my beautiful project. Appreciate it Thanks Nick scotchnsirloin@gmail.com

oltimer -> RE: **NITROMODELS REPLACEMENT PARTS REQUEST HERE *** (2/25/2008 4:55:40 PM)
Nitro Planes Customer Support; I need a new canopy for my CMP Hellcat. Can I buy a couple. I ground loop a lot! Thanks, Frankk frank.kagele@verizon.net.

opjose -> RE: **NITROMODELS REPLACEMENT PARTS REQUEST HERE *** (2/25/2008 5:02:20 PM)
Out of curiosity, how do your ground loops cause the canopy to fail or be damaged? I would expect that you would be damaging the wing tips if anything. Is the plane flipping over?

oltimer -> RE: **NITROMODELS REPLACEMENT PARTS REQUEST HERE *** (2/25/2008 6:53:46 PM)
Opjose; I ran out of runway and the grass was rough. It tripped the plane and over it went with full up elev. Frank

cedo1 -> RE: **NITROMODELS REPLACEMENT PARTS REQUEST HERE *** (2/26/2008 3:32:47 PM)
I have a fascination plane and need to buy a new set of landing gear for it please let me know who when and where can i do this..... Specs: Engine 36-56 2S/50-52 4S Wing span 1400mm (55.1") Wing area 35.5 dm2 Length 1420mm (55.8") Weight 2350g (5.1lbs) Radio 4ch, 5 servos (standard)

nitrostaff1 -> RE: **NITROMODELS REPLACEMENT PARTS REQUEST HERE *** (2/27/2008 2:25:49 AM)
sure I can help. what's your previous order number? John Nitro Planes quote: ORIGINAL: cedo1 I have a fascination plane and need to buy a new set of landing gear for it please let me know who when and where can i do this..... Specs: Engine 36-56 2S/50-52 4S Wing span 1400mm (55.1") Wing area 35.5 dm2 Length 1420mm (55.8") Weight 2350g (5.1lbs) Radio 4ch, 5 servos (standard)

oufly2 -> RE: **NITROMODELS REPLACEMENT PARTS REQUEST HERE *** (2/29/2008 4:04:57 PM)
Hello, I bought 2 Zlin-50 planes and they are very nice arrived in perfect condition. Only one problem the canopies are spray painted silver, not like the ones I ordered in the picture on-line. I read a review from someone who got a replacement canopy I would like to get two because I also do a very detailed cockpit on all my planes and I'm not a big fan of the painted canopy. Thanks for the help Keith Lynch Klynch@riverradiology.com

nitrostaff1 -> RE: **NITROMODELS REPLACEMENT PARTS REQUEST HERE *** (2/29/2008 9:29:06 PM)
Sure I can help. Can you please PM me your order number. Thanks John Nitro Planes quote: ORIGINAL: oufly2 Hello, I bought 2 Zlin-50 planes and they are very nice arrived in perfect condition. Only one problem the canopies are spray painted silver, not like the ones I ordered in the picture on-line. I read a review from someone who got a replacement canopy I would like to get two because I also do a very detailed cockpit on all my planes and I'm not a big fan of the painted canopy. Thanks for the help Keith Lynch Klynch@riverradiology.com

smithth -> RE: **NITROMODELS REPLACEMENT PARTS REQUEST HERE *** (3/2/2008 11:05:07 PM)
I need a new canard for your Long ez .46 voyager. Due to second incident with crosswind landing, Ive broken it and dont think its repairable. How much would a new one be? Todd Smith

GoldKraft -> RE: **NITROMODELS REPLACEMENT PARTS REQUEST HERE *** (3/4/2008 3:04:37 AM)
I need a shaft for my Alpha 480 brushless outrunner. Do you have them? Thanks

nitrostaff1 -> RE: **NITROMODELS REPLACEMENT PARTS REQUEST HERE *** (3/5/2008 10:58:09 PM)
PM me your order number and I'll help you out. John Nitro Planes quote: ORIGINAL: GoldKraft I need a shaft for my Alpha 480 brushless outrunner. Do you have them? Thanks

BOLD PILOT -> RE: **NITROMODELS REPLACEMENT PARTS REQUEST HERE *** (3/6/2008 12:00:25 AM)
Hi Jon On February 4 I ordered a CANOPY for my 80" Giant ZERO. It was supposed to be in stock in 3 weeks. I haven't heard when I would be receiving it. Can you please bring me up to date. Geo. Derewenko

gargajm -> RE: **NITROMODELS REPLACEMENT PARTS REQUEST HERE *** (3/6/2008 1:37:17 PM)
I am looking for a replacement cowl for the: Item 90A91B_Gas_Extra260size50Blue. I've tried to find it on your web site, but could not? Hopefully you can help??

jjulian66 -> RE: **NITROMODELS REPLACEMENT PARTS REQUEST HERE *** (3/6/2008 8:52:49 PM)
Do you have a Cowl for your Yak 54 3D Fuel/Electric 25 - 45.5". I am thinking about changing it over to Nitro and don't want to damage the cowl that came with the plane. Thanks, Jay

jjulian66 -> RE: **NITROMODELS REPLACEMENT PARTS REQUEST HERE *** (3/7/2008 2:54:48 PM)
I messed up and broke my motor mount for your Yak 54 3D Fuel/Electric 25 - 45.5". Do you sell them or do you have something else that will work? Thanks, Jay

Page: << < prev 7 8 [9] 10 11 12 13 14 15 16 next > >>

SITE MAP! : : FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

0.34375