Blending 2 fuels (Full Version)

All Forums >> [Glow Engines, Gas Engines, Fuel & Mfg Support Forums] >> RC Fuels



Message

COPO -> Blending 2 fuels (4/22/2007 1:46:24 PM)

Ok this may have been asked many times over, but I am trying to mix 2 different fuels. Read many posts and am still confused. I have Cool Power 30% nitro 22% all syn lube. I have Power Master GMA stunt fuel 10% nitro 22% 50/50 lube.

I want to make 64oz. (1/2 gal) of 25% nitro 22% lube. How much of the Cool Power do I have to add to the PowerMaster fuel to make this combo.

Thanks



d_bodary -> RE: Blending 2 fuels (4/22/2007 2:35:30 PM)

well a quart of each will give you 20% So about 40 ounces of cool power and 20 ounces of 10% will give you 23% nitro. So go with 44 ounces of 30% and 20 ounces of 10%. And hope the oils in the two different fuels are compatible.

Dennis



COPO -> RE: Blending 2 fuels (4/22/2007 3:20:24 PM)

Thank you very much. I would assume the oils will be compatible, but not completely sure. I shall give it a try.



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
9.179688E-02