|
Krelubot -> small brass bushings for Photon (6/12/2007 2:50:22 PM)
|
I finally have my Photon back together.
It runs again!!!
I am looking for the small brass bushings that come with the front aluminum uprights. #IRCP-30905
They are small, brass colored, and come 4 per set of front parts.
Unable to find a part number for these things.
I need more of these. Also when installing the uprights, the screw seems too long, so when I tighted it, it binds the shaft.
Leaving it loose so that it doesn't bind causes the screw and bushing to fall out over time. (which is why I need more)
Any tips... I suppose I could get a saw and shorten the screw a bit unless you guys already have one.
|
|
|
|
